Not sure what you plan to do with it.
But you may find this useful to get started:
In the below line you have used 2 diff. variables "i" and "y".
But in the actual "for" loop you are using same variable "f" for both.
Hey, I'm writing this bash script that will test print me many copies of the same program but with different combos of 4 variables being between 1 and 100. Here's the code:
#! /bin/bash
x=0
for ((a=1; a < 101; a++))
do
for ((b=1; b < 101; b++))
do
for ((c=1; c < 101; c++))
do
for... (4 Replies)
Good morning - I have publication lists from 34 different faculty members. I need to end up with the numbers of publications in common across all 34 faculty.
I need to grep person1 (last name) in list2, person1 in list3, person1 in list 4, etc., then person2 in list3, person 2 in list4, etc.,... (2 Replies)
I have to to read files simultaneously in two nested loops,but am getting error can anyone do the needful.
useridFile=userIds.txt
fname=kiran.txt
exec<$useridFile
while read line
do
echo "User IDs are..$line"
USER_ID=$line
REMOTE_DIR_LOCATION="/home/test/$USER_ID"
SOURCE_DIR=$USER_ID... (1 Reply)
You can use one while inside another?
I made the following script (without really knowing if I can use two while) to get 3 numbers different from each other at random:
num1=$(( $RANDOM % 10 ))
num2=$num1
while
do
num2=$(( $RANDOM % 10 ))
done
num3=$num1
while
do
while
do... (1 Reply)
Ok... am going slightly loopy trying to get this working (no pun intended)
What I need is to modify this code which takes a string input then echo's each character on a seperate line, to do the same thing but to put DIGIT: in front of numbers and LETTER: in front of letters.
I know a regular... (5 Replies)
KSH isn't my strong suit but it's what my company has to offer. I've got a script with two nested loops, a FOR and UNTIL, and that works fine. When I add a CASE into the mix I end up getting "Unexpected 'done' at line xx" errors. Any suggestions on this?
for divi in at ce ci cm co de di fl... (9 Replies)
Hi experts,
I just want to know if there is a better solution to my nested while read loops below:
while read line; do
while read line2; do
while read line3; do
echo "$line $line2 $line3"
done < file3.txt
done < file2.txt
done < file1.txt >... (4 Replies)
Greetings All,
The following script attempts to enumerate all users in all groups in the group file(GROUP) and echo the following information:
GROUP ---> USER
The script is as follows:
IFS=","
for GROUP in `ypcat -k group | cut -d" " -f1`
do
for USER in `ypcat -k group... (13 Replies)
It's been a while since I used csh formatting and I am having a little bit of trouble with a few things. Things seem so much easier to execute in Matlab, however I need to do this on the terminal because of the programs I am trying to interact with.
So here's what I want to do: I have a file... (0 Replies)
for server in $(echo `cat /tmp/ScanHosts_${USERSNAME}.TXT`)
do
for portnumber in $(echo `cat /tmp/ScanPorts_${USERSNAME}.TXT`)
do
#echo ${server} ${portnumber}
... (3 Replies)
Discussion started by: SkySmart
3 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)