09-28-2009
For intel box, you have to access the BIOS
10 More Discussions You Might Find Interesting
1. Solaris
Hello everybody,
I installed sun solaris i86 , the programme installation install the
"Mini Root" and after that he doing shutdown.
the camputer coming up and he can't boot.
how i can to resuled this problem ???
Thenk you in advence..... (2 Replies)
Discussion started by: yanly
2 Replies
2. Solaris
Hi,
I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?... (12 Replies)
Discussion started by: Sapfeer
12 Replies
3. Solaris
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Discussion started by: ouzist
1 Replies
4. Solaris
Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies
5. Solaris
Hi All,
I had install the solaris 10 into the SUNFIRE V890 server, after installed, it keep rebooting.
I wish to enter the OK mode again, and install back the Solaris 10.
i had try the "break" button and "stop+A" button, but all fail.
kindly advice... (4 Replies)
Discussion started by: SmartAntz
4 Replies
6. Hardware
hello
i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message:
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory..
RAM-Copy CRC failure!Can't start: No image found
FATAL: Can't find/decompress... (0 Replies)
Discussion started by: bahjatm
0 Replies
7. Hardware
Hi all!
I have a Sun JavaStation-1 which doesn't boot: when I turn on the power switch, the power led becomes lit but the screen remains black (going in power save after about 5 seconds). :eek:
Now my question is: could be this problem due to a dead IDPROM? :confused:
I have this doubt because... (0 Replies)
Discussion started by: wisechip
0 Replies
8. Solaris
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
... (6 Replies)
Discussion started by: insatiable1610
6 Replies
9. UNIX for Beginners Questions & Answers
Hi all,
I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI... (2 Replies)
Discussion started by: robbo007
2 Replies
10. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
LEARN ABOUT DEBIAN
pnpbios
PNPBIOS(4) BSD/i386 Kernel Interfaces Manual PNPBIOS(4)
NAME
pnpbios -- support for embedded devices on the motherboard
DESCRIPTION
The pnpbios driver enumerates embedded ISA devices on the motherboard whose BIOS supports ``Plug and Play BIOS Specification''. It assigns
ISA bus resources (interrupt line, DMA channel, I/O ports, and memory region) to each device and activates it.
If it cannot assign necessary resources to a device without causing conflict with other devices in the system, the device will not be acti-
vated and will be unavailable to programs.
CAVEATS
There is no explicit way to disable individual embedded devices. The pnpbios driver will find all devices reported by the ``Plug and Play
(PnP)'' BIOS and try to activate them all.
There is no way to explicitly assign particular resource to a device. The resource assignment is fully automatic and there is no provision
for manual override.
SEE ALSO
pnp(4)
STANDARDS
Compaq, Phenix, and Intel, Plug and Play BIOS Specification Version 1.0A, May 5, 1994.
Compaq, Phenix, and Intel, Plug and Play BIOS CLARIFICATION Paper for Plug and Play BIOS Specification Version 1.0A, October 6, 1994.
HISTORY
The pnpbios driver first appeared in FreeBSD 4.0.
AUTHORS
The pnpbios driver was written by Mike Smith.
BSD
September 20, 2001 BSD