Kernel Support Post: 302353878

9 More Discussions You Might Find Interesting

1. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Hi All, Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff. Cheers, Brendan

2. Ubuntu

Does Posix support kernel level threading?

Hi All, Please let me know the following. 1) Does POSIX lib support kernel threads? if yes, please let me know what are the specific function calls used to create/manage kernel threads. 2) Is Posix scalable? 3) Does POSIX take the advantage of multiprocessor systems? your help is much...

3. Linux

Supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" me

supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes. I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason? It has...

4. Solaris

Which file is read by kernel to set its default system kernel parameters values?

Hi gurus Could anybody tell me which file is read by kernel to set its default system kernal parameters values in solaris. Here I am not taking about /etc/system file which is used to load kernal modules or to change any default system kernal parameter value Is it /dev/kmem file or something...

5. UNIX for Dummies Questions & Answers

Make sure kernel was compiled with NFS server support

Hi there, I have a Debian Squeeze server. How can I check if my kernel was compiled with NFS server support? Extra question: if it is not, how do I enable NFS support in my kernel? Thanks for your help. Santiago

6. Ubuntu

Phenom II support in kernel

Does anyone know at which kernel version support for Phenom II x6 first appeared?

7. Linux

Unload kernel module at boot time (Debian Wheezy 7.2, 3.2.0-4-686-pae kernel)

Hi everyone, I am trying to prevent the ehci_hcd kernel module to load at boot time. Here's what I've tried so far: 1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here): 2) Blacklisted the module by adding the following string to 3) Tried to blacklist the module...

8. IP Networking

[ipv6_test] Kernel is not compiled with IPv6 support

Hello, i tried to enable IPv6 networking and after service network restart i seen these messages: FATAL: Error inserting ipv6 (/lib/modules/2.6.18-348.16.1.el5.028stab108.1/kernel/net/ipv6/ipv6.ko): Device or resource busy CRITICAL : Kernel is not compiled with IPv6 support Bringing up...

9. Solaris

Older OS support in Kernel zones

folks, I have a query. Can we create Kernel zone with the earlier Solaris OS? More precisely Can i create kernel zone with any different OS than that of OS in global zone. As of now in sol11U2 if we create kernel zone, there will be sol11u2 OS in kernel zone since the same is in global. But...

LEARN ABOUT FREEBSD

viawd

VIAWD(4)						   BSD Kernel Interfaces Manual 						  VIAWD(4)

NAME

     viawd -- device driver for VIA south bridge watchdog timer

SYNOPSIS

     To compile this driver into the kernel, place the following line in your kernel configuration file:

	   device viawd

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   viawd_load="YES"

DESCRIPTION

     The viawd driver provides watchdog(4) support for the watchdog interrupt timer present on VIA south bridge chipset (VT8251, CX700, VX800,
     VX855, VX900).

     The VIA south bridge have a built-in watchdog timer, which can be enabled and disabled by user's program and set between 1 to 1023 seconds.

     The viawd driver when unloaded with running watchdog will reschedule the watchdog to 5 minutes.

SEE ALSO

     watchdog(4), watchdog(8), watchdogd(8), watchdog(9)

HISTORY

     The viawd driver first appeared in FreeBSD 10.0.

AUTHORS

     The viawd driver and this manual page were written by Fabien Thomas <fabient@FreeBSD.org>.

BSD
								 December 7, 2011							       BSD