Hi All
I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that.
How do I:
1. Check the duplex settings on my eri0 card?
2. Set the... (3 Replies)
I have a TOSHIBA AS7000 B150 Sun Box
I wanted to run it with 100M/full duplex
I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot.
set eri:eri_adv_100fdx_cap=1
set eri:eri_adv_100hdx_cap=0
set eri:eri_adv_autoneg_cap=0
But when I... (4 Replies)
Hi there
We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is.
As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only... (1 Reply)
I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5.
#ndd -set /dev/le adv_100fdx_cap 1 (6 Replies)
Hi,
In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this?
Please advice. (2 Replies)
Hi,
How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct?
Also let me know how to change from half to full duplex. (1 Reply)
How to change Speed Duplex !
How to change Speed Duplex by command
chdev -P -l ent1 -a media_speed=1000_Full_Duplex
How to change Speed Duplex by Smitty .
smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ... (0 Replies)
VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good.
Other ethernet adapter in the VIO server are connected and running in Full duplex speed.
Please help me find why this shared... (4 Replies)
So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex.
I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters
STARTMODE=onboot
BOOTPROTO=static... (6 Replies)
Discussion started by: lutador72
6 Replies
LEARN ABOUT OSF1
autosysconfig
autosysconfig(8) System Manager's Manual autosysconfig(8)NAME
autosysconfig - Maintains the list of dynamic kernel subsystems that are automatically configured
SYNOPSIS
/sbin/init.d/autosysconfig add | delete | list [subsystem-name]
DESCRIPTION
Use the autosysconfig program to maintain the kernel's list of dynamic subsystems that are automatically configured at each system startup.
The following list describes the autosysconfig commands: Adds a dynamic subsystem to the list. At each system startup, the specified sub-
system is automatically configured into the kernel. (The object module that contains the subsystem must exist in the /subsys or /var/subsys
directory for automatic configuration to work correctly.) You must specify the subsystem-name parameter with the add command. Deletes a
dynamic subsystem from the list. At each system startup, the specified subsystem is omitted from the kernel. You must specify the subsys-
tem-name parameter with the delete command. Lists the dynamic subsystems that are automatically configured at system startup.
The system issues the sysconfig -c command to configure dynamic subsystems at system startup. The subsystems are added to the kernel dur-
ing the execution of the init program.
No dynamic subsystems are automatically configured by default. You must add a subsystem name to the list to enable automatic configuration
of that subsystem.
EXAMPLES
The following are examples of using the autosysconfig command: To add a subsystem to the list of automatically configured subsystems, issue
the following command: # /sbin/init.d/autosysconfig add lat
This command adds the lat (Local Area Terminal) subsystem to the list. To see what subsystems are on the list, issue the following
command: # /sbin/init.d/autosysconfig list Current automatic configuration list includes the following dynamic subsystems: lat
SEE ALSO
Commands: sysconfig(8), sysconfigdb(8)
System Administration
autosysconfig(8)