i have already replaced my code with
which is even working but wanted to know what exactly the resaon of failure on IA64 thats all as you are saying as may be the instruction set difference,
i have to be very carefull with respect to other functions on IA 64 no idea with what it fails.
i have just installed suse 8.1 on a third computer which has an Asus p4s8x with onboard NIC and sound. now, on install suse detected everything automatically with no probelm, however upon reboot the sound failed to load as well as the network card. /dev/eth* doesnt exist. i looked in the bios and... (2 Replies)
i got a NV11 geForce2 100/200 and suse 9.0 pro boot the kernal but then the screen
goes blank and nothing else can't install suse 9.0 pro and grabs for this problem
x will not come up at all
just the boot screen with rez and so on but once i tell it to install thats i have a nec multisync... (6 Replies)
Hello,
So, I burned the 5 cds of SuSE 10.1, and would really like to begin installation.
But when I get to the partitioning phase, I get an error message saying the first hard drive is unreadable by parted, and that I'll have to use Yast instead. It also tells me I wont be able to move delete... (0 Replies)
I read the description of the command readdir by using 'man readdir'. However, in the description i was suggesed to refer to readdir(3).
I wonder how to see the manual of readdir(3)
Thanks (1 Reply)
I am having a hard time doing this and can't seem to find an example to help me. This is my code:
DIR *dirp=opendir(pathname);
struct stat filebuf;
struct dirent entry;
struct dirent *dp=&entry;
RWCString pattern;
for (int i = 0; i < request_->getNumStreams(); i++)
{
... (2 Replies)
hi Guys,,
Am very new to Linux OS.. This is my first experience with Linux.
I have installed linux suse 10 in my laptop.it was working fine.. suddenly after 3 days,(i was changing some options of the already installed linux) when i login, i am getting only command interface and GUI is not... (2 Replies)
Quick question.
I can not get the context corrert on this code.
opendir(DIR, ".");
@fileldiv = grep(/l*/,readdir(DIR));
closedir(DIR);
I am trying to search all html files within a dir that start with l.
Thanks for your help. (1 Reply)
I have a process that needs two active connections to the same zone of shared memory simultaneously.
The firs conection works ok, but when i do the second call to shmat it give me error 22 (EINVAL). Only works ok the second call to shmat if i disconnect the first connection (shmdt)
Steps:... (3 Replies)
I setup a RAID 5 with 5 drives, one failed, hardware failure so I physically removed it from the raid after powering the machine off then powered it back on and my raid was still good but no 5th drive. I built a 5th drive from scratch and added it in the raid thinking the raid would go into... (0 Replies)
Hi all,
I'm trying to install of Gbrowse recently. Unfortunately, I stuck at the step to install GD which are prerequisite for Gbrowse installation.
I got try to install it, but it seems like got a lot of error message occurred :(
And still can't fix the problem yet.
I'm using ia64 linux... (10 Replies)
Discussion started by: patrick87
10 Replies
LEARN ABOUT BSD
seekdir
DIRECTORY(3) Library Functions Manual DIRECTORY(3)NAME
opendir, readdir, telldir, seekdir, rewinddir, closedir - directory operations
SYNOPSIS
#include <sys/types.h>
#include <sys/dir.h>
DIR *opendir(filename)
char *filename;
struct direct *readdir(dirp)
DIR *dirp;
long telldir(dirp)
DIR *dirp;
seekdir(dirp, loc)
DIR *dirp;
long loc;
rewinddir(dirp)
DIR *dirp;
closedir(dirp)
DIR *dirp;
DESCRIPTION
Opendir opens the directory named by filename and associates a directory stream with it. Opendir returns a pointer to be used to identify
the directory stream in subsequent operations. The pointer NULL is returned if filename cannot be accessed, or if it cannot malloc(3)
enough memory to hold the whole thing.
Readdir returns a pointer to the next directory entry. It returns NULL upon reaching the end of the directory or detecting an invalid
seekdir operation.
Telldir returns the current location associated with the named directory stream.
Seekdir sets the position of the next readdir operation on the directory stream. The new position reverts to the one associated with the
directory stream when the telldir operation was performed. Values returned by telldir are good only for the lifetime of the DIR pointer
from which they are derived. If the directory is closed and then reopened, the telldir value may be invalidated due to undetected direc-
tory compaction. It is safe to use a previous telldir value immediately after a call to opendir and before any calls to readdir.
Rewinddir resets the position of the named directory stream to the beginning of the directory.
Closedir closes the named directory stream and frees the structure associated with the DIR pointer.
Sample code which searchs a directory for entry ``name'' is:
len = strlen(name);
dirp = opendir(".");
for (dp = readdir(dirp); dp != NULL; dp = readdir(dirp))
if (dp->d_namlen == len && !strcmp(dp->d_name, name)) {
closedir(dirp);
return FOUND;
}
closedir(dirp);
return NOT_FOUND;
SEE ALSO open(2), close(2), read(2), lseek(2), dir(5)4.2 Berkeley Distribution September 24, 1985 DIRECTORY(3)