no both of them are not the same version.
can you please what is the reason why this is failing in ia64 ,
version i have got 2.6.16,whether it is version dependent or any calls have been replaced,
apart from comparison with Red Hat linux i just wanted to know is it a common issue or specific.
i have just installed suse 8.1 on a third computer which has an Asus p4s8x with onboard NIC and sound. now, on install suse detected everything automatically with no probelm, however upon reboot the sound failed to load as well as the network card. /dev/eth* doesnt exist. i looked in the bios and... (2 Replies)
i got a NV11 geForce2 100/200 and suse 9.0 pro boot the kernal but then the screen
goes blank and nothing else can't install suse 9.0 pro and grabs for this problem
x will not come up at all
just the boot screen with rez and so on but once i tell it to install thats i have a nec multisync... (6 Replies)
Hello,
So, I burned the 5 cds of SuSE 10.1, and would really like to begin installation.
But when I get to the partitioning phase, I get an error message saying the first hard drive is unreadable by parted, and that I'll have to use Yast instead. It also tells me I wont be able to move delete... (0 Replies)
I read the description of the command readdir by using 'man readdir'. However, in the description i was suggesed to refer to readdir(3).
I wonder how to see the manual of readdir(3)
Thanks (1 Reply)
I am having a hard time doing this and can't seem to find an example to help me. This is my code:
DIR *dirp=opendir(pathname);
struct stat filebuf;
struct dirent entry;
struct dirent *dp=&entry;
RWCString pattern;
for (int i = 0; i < request_->getNumStreams(); i++)
{
... (2 Replies)
hi Guys,,
Am very new to Linux OS.. This is my first experience with Linux.
I have installed linux suse 10 in my laptop.it was working fine.. suddenly after 3 days,(i was changing some options of the already installed linux) when i login, i am getting only command interface and GUI is not... (2 Replies)
Quick question.
I can not get the context corrert on this code.
opendir(DIR, ".");
@fileldiv = grep(/l*/,readdir(DIR));
closedir(DIR);
I am trying to search all html files within a dir that start with l.
Thanks for your help. (1 Reply)
I have a process that needs two active connections to the same zone of shared memory simultaneously.
The firs conection works ok, but when i do the second call to shmat it give me error 22 (EINVAL). Only works ok the second call to shmat if i disconnect the first connection (shmdt)
Steps:... (3 Replies)
I setup a RAID 5 with 5 drives, one failed, hardware failure so I physically removed it from the raid after powering the machine off then powered it back on and my raid was still good but no 5th drive. I built a 5th drive from scratch and added it in the raid thinking the raid would go into... (0 Replies)
Hi all,
I'm trying to install of Gbrowse recently. Unfortunately, I stuck at the step to install GD which are prerequisite for Gbrowse installation.
I got try to install it, but it seems like got a lot of error message occurred :(
And still can't fix the problem yet.
I'm using ia64 linux... (10 Replies)
Discussion started by: patrick87
10 Replies
LEARN ABOUT CENTOS
ksc
KSC(1) User Commands KSC(1)NAME
ksc - Linux kernel module source checker
SYNOPSIS
ksc [ -d | --directory ] DIRECTORY
ksc [ -k | --ko ] FILE
OPTIONS
KSC accepts command-line arguments, and has both a long and short form usage. You can use either style or combine them to specify
options. When the tool is run with kernel module sources it checks for all four architectures, and when run with binary kernel modules, it
checks for the specific architecture for which the binary was built.
Valid RHEL whitelist releases are rhel6.0, rhel6.1, rhel6.2, rhel6.3, rhel6.4
-h, --help
show this help message and exit
-c CONFIG, --config=CONFIG
path to the local ksc.conf file. If not specified the tool tries to read from ~/ksc.conf and if that is also not found then from
/etc/ksc.conf
-d DIRECTORY, --directory=DIRECTORY
path to the directory
-i, --internal
to create text files to be used internally.
-k KO, --ko=KO
path to the ko file. You should either use -d or -k to run the KSC tool, but not both. If both -d and -k option is used at the
same time then only -d is used and the -k option is discarded.
-n RELEASENAME, --name=RELEASENAME
Red Hat release against which the bug is to be filed. Default value is 6.5
-p PREVIOUS, --previous=PREVIOUS
path to the previous resultset file and submit it as a bug to Red Hat Bugzilla.
-r RELEASE, --release=RELEASE
RHEL whitelist release used for comparison
-s, --submit
Submits the report to the Red Hat bugzilla (https://bugzilla.redhat.com). The credentials need to be in the /etc/ksc.conf file. The
tool will prompt for bugzilla password.
The configuration file looks like below:
[bugzilla]
user=user@redhat.com
partner=partner-name
partnergroup=partner-group
server=https://bugzilla.redhat.com/xmlrpc.cgi
-v, --version
Prints KSC version number
ksc - Version 0.9.11 Feb 2014 KSC(1)