contents of named.conf and /var/named/db.gmail.com
Thanks bartus11 for your reply.
contents of zone entry for gmail.com in the forward zone only are given below
Code:
zone "gmail.com"
{
type master;
file "db.gmail.com";
};
all contents of /var/named/db.gmail.com are
Code:
$TTL 86400
;
;{name} {ttl} Class SOA Origin Postmaster
;----------------------------------------------------------------------------------
@ IN SOA www.gmail.com. root.www.gmail.com. (
2005010101 ; Serial
3600 ; Refresh (1 Hour)
1800 ; Retry (30 Minutes)
6048000 ; Expire (1 Week)
86400 ) ; Minimum (24 Hours)
;
;{name} {ttl} Class NS Nameserver Name
;------------------------------------------------------
IN NS www.gmail.com.
;
;{name} {ttl} Class A IP Address
;-------------------------------------------------
www IN A 192.168.50.153
gmail.com. IN A 192.168.50.153
gmail.com. IN MX 155555 www.gmail.com
localhost IN A 127.0.0.1
one more thing please do i have to change the TTL serial number because it is same in my primary server dns zone file do i have to make any entry for this domain(gmail.com) or zone in my primary dns zone file, if yes then please guide.
Looking forward to hear from you . Thanks in advance.
Regards,
Sikander
Last edited by vbe; 08-24-2009 at 05:37 AM..
Reason: TRied to add code tags...
Allright,
Thanks to http://docs.sun.com I've got the tcp/ip portion of my box working now. I can see anything I want, as long as it's got a numerical address.
Does anyone know how to add just a DNS entry? like reference my dns server, and configure my host name? (1 Reply)
I just setup Solaris 2.6 on my Sparc 10 and I cannot figure out how to configure my DNS settings. I am using @home as my ISP and they assigned me two DNS servers to use and a domain. I created a "resolv.conf" file in my etc folder and added the following exactly as shown:
domain... (4 Replies)
I have managed to setup my Solaris box to receive an IP number from a DHCP server. In addition, I can ping and telnet between my dhcp server and my solaris box using the IP number. However, I can't resolve addresses by name from my solaris box.
In my nsswitch.conf file I have:
hosts: dns
... (4 Replies)
How do I set the Primary and secondary DNS name server for a Sparc IIi running Solaris 9. I have already put them in the resolv.conf file but they still do not work. (5 Replies)
hey guys, how to add soalris box as a microsoft DNS Client ?
and how to register in the microsoft DNS ??
i managed to query from the DNS server after adding /etc/resolve.conf and editing /etc/nsswitch.conf
but i need to register the soalris server (dns Client) into Microsoft DNS automatically.... (3 Replies)
hi all
forgive my ignorance, but when IVe set up DNS Ive put in the various server details in the /etc/resolv.conf and away I go. Suddenly Ive been reading about DNS, and I need to created a /etc/named.conf file.
so, my question is this. DNS, what part does the /etc/resolv.conf play in... (3 Replies)
Hi all
Long time no speak, I hope you are all well.
Im looking at a DNS issue here and reckon Igot a AD / DNS server issue elsewhere but need to rule out the configuration of my two server's first.
IVe got the nameserver enteries in /etc/resolv.conf and dns in the /etc/nsswitch.conf
... (2 Replies)
Hi,
We just built a new Solaris 10 zone. And would like to add it to our DNS server. Its also Solaris 10. Please let me know how can I get the IP resolved using this DNS server. I added entry into zone config file but not working. I did restarted the DNS services. And also added nameserver name... (5 Replies)
Discussion started by: snchaudhari2
5 Replies
LEARN ABOUT DEBIAN
modbus_read_input_registers
MODBUS_READ_INPUT_RE(3) Libmodbus Manual MODBUS_READ_INPUT_RE(3)NAME
modbus_read_input_registers - read many input registers
SYNOPSIS
int modbus_read_input_registers(modbus_t *ctx, int addr, int nb, uint16_t *dest);
DESCRIPTION
The modbus_read_input_registers() function shall read the content of the nb input registers to address addr of the remote device. The
result of the reading is stored in dest array as word values (16 bits).
You must take care to allocate enough memory to store the results in dest (at least nb * sizeof(uint16_t)).
The function uses the Modbus function code 0x04 (read input registers). The holding registers and input registers have different historical
meaning, but nowadays it's more common to use holding registers only.
RETURN VALUE
The modbus_read_input_registers() function shall return the number of read input registers if successful. Otherwise it shall return -1 and
set errno.
ERRORS
EMBMDATA
Too many bits requested
SEE ALSO modbus_read_input_bits(3)modbus_write_register(3)modbus_write_registers(3)AUTHORS
The libmodbus documentation was written by Stephane Raimbault <stephane.raimbault@gmail.com[1]>
NOTES
1. stephane.raimbault@gmail.com
mailto:stephane.raimbault@gmail.com
libmodbus 3.0.3 05/26/2012 MODBUS_READ_INPUT_RE(3)
08-24-2009
contents of named.conf and /var/named/db.gmail.com
