Tyan Thunder i7501 Pro - 2x 3,06 GHz Xeon Post: 302345611

Sponsored Content

UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) Linux Benchmarks Tyan Thunder i7501 Pro - 2x 3,06 GHz Xeon Post 302345611 by RudiTheStriker on Wednesday 19th of August 2009 05:00:45 PM

08-19-2009

Registered User

Tyan Thunder i7501 Pro - 2x 3,06 GHz Xeon

CPU/Speed: 2x 3,06 GHz Xeon SL6VP
Ram: 2 GB SDRAM ECC Registriert
Motherboard: Tyan Thunder i7501 Pro (S2721-533)
Bus: 533 MHz
Cache: 512 KB
Controller: ICH3 IDE Controller
Disk: 20 GB Maxtor EIDE (2B020H1) UDMA/100
Load:
Kernel: Linux 2.6.26-2-686
Kernel ELF?: yes
pgms: gcc 4.3.2 compiled;

Code:

BYTE UNIX Benchmarks (Version 3.11)
  System -- Linux jupiter 2.6.26-2-686 #1 SMP Sun Jul 26 21:25:33 UTC 2009 i686 GNU/Linux
  Start Benchmark Run: Mo 17. Aug 21:47:15 CEST 2009
   1 interactive users.
Dhrystone 2 without register variables   4454428.6 lps   (10 secs, 6 samples)
Dhrystone 2 using register variables     4579901.5 lps   (10 secs, 6 samples)
Arithmetic Test (type = arithoh)              nan lps   (10 secs, 6 samples)
Arithmetic Test (type = register)        777333.6 lps   (10 secs, 6 samples)
Arithmetic Test (type = short)           588680.0 lps   (10 secs, 6 samples)
Arithmetic Test (type = int)             776966.9 lps   (10 secs, 6 samples)
Arithmetic Test (type = long)            777269.3 lps   (10 secs, 6 samples)
Arithmetic Test (type = float)           712241.6 lps   (10 secs, 6 samples)
Arithmetic Test (type = double)          712173.5 lps   (10 secs, 6 samples)
System Call Overhead Test                951291.0 lps   (10 secs, 6 samples)
Pipe Throughput Test                     417737.3 lps   (10 secs, 6 samples)
Pipe-based Context Switching Test         84021.9 lps   (10 secs, 6 samples)
Process Creation Test                      7207.5 lps   (10 secs, 6 samples)
Execl Throughput Test                      2093.0 lps   (9 secs, 6 samples)
File I/O                                   no measured results
File I/O                                   no measured results
C Compiler Test                             684.6 lpm   (60 secs, 3 samples)
Shell scripts (1 concurrent)               3652.7 lpm   (60 secs, 3 samples)
Shell scripts (2 concurrent)               2703.3 lpm   (60 secs, 3 samples)
Shell scripts (4 concurrent)               1558.3 lpm   (60 secs, 3 samples)
Shell scripts (8 concurrent)                823.7 lpm   (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places          74499.1 lpm   (60 secs, 6 samples)
Recursion Test--Tower of Hanoi            76086.0 lps   (10 secs, 6 samples)


                     INDEX VALUES            
TEST                                        BASELINE     RESULT      INDEX

Arithmetic Test (type = double)               2541.7   712173.5      280.2
Dhrystone 2 without register variables       22366.3  4454428.6      199.2
Execl Throughput Test                           16.5     2093.0      126.8
Pipe-based Context Switching Test             1318.5    84021.9       63.7
Shell scripts (8 concurrent)                     4.0      823.7      205.9
                                                                 =========
     SUM of  5 items                                                 875.9
     AVERAGE                                                         175.2

RudiTheStriker

View Public Profile for RudiTheStriker

Find all posts by RudiTheStriker

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

domain logon problem - FreeBSD PDC w/ win2k pro and winxp pro

this is the seventh problem i'm having with samba. for some reason, i cannot logon to the domain. i've created user accounts... and i was able to establish a connection between the samba server (my PDC) and my workstations by logging in as "root." however now when i try to logon it gives...

2. Linux Benchmarks

Dell Dual Xeon PowerEdge 4600

Notes: System Configuration: Dell Computer Corporation PowerEdge 4600 (4 X Intel(R) XEON(TM) CPU 2.00GHz 1988.782 MHz) hyperthreaded System clock frequency: 99.0827 MHz Memory size (approximate): 2559 Megabytes ========================= CPUs ======================== CPU # CPU...

3. Linux Benchmarks

HP DL 360 Xeon 2.4 Ghz - RedHat AS 2.1

CPU/Speed: Xeon 2.4 GHz Ram:2512M Motherboard: Bus:533 Mhz Cache: Controller: Disk: Load: Kernel: RedHat AS 2.1 - 2.4.9-e.27smp Kernel ELF?: pgms: BYTE UNIX Benchmarks (Version 3.11) System -- Linux lnxdev 2.4.9-e.27smp #1 SMP Tue Aug 5 15:49:54 EDT 2003 i686 unknown ...

4. Linux

Optimized Linux 2.6.10 Kernel for Dual Xeon with Hyperthreading

Anyone have tips on configuring the 2.6.10 kernel to take full advantage of dual 2.4 Ghz Xeons? I'm not getting expected benchmark results.... and seemingly was better off with a single 2600+ AMD processor.

5. Linux Benchmarks

Dual Intel Xeon 2.4Ghz - Linux 2.4.26 SMP

System: CPU/Speed: Dual Intel Xeon 2.4Ghz Ram: 2 GB DDR 266 SDRAM Motherboard: SuperMicro X5DE8-GG Bus: 533MHz/400MHz system bus - Cache: 512KB HD Controller: EIDE Serverworks� GC-SL Chipset Extra GCC compiler flags: -s...

6. Linux Benchmarks

HP ML 350 dual Xeon 3.2GHz

CPU: dual Xeon 3.2 GHz Ram: 1Gig Motherboard: Bus: 800MHz Cache: 1MB Controller:Smart Array 641 Disk: UltraSCSI 320 Load: Kernel:2.6.9-1.667smp Kernel ELF?: yes pgms: compiled with gcc 3.4.3 BYTE UNIX Benchmarks (Version 3.11) System -- Linux ford 2.6.9-1.667smp #1 SMP...

7. AIX

IBM pSeries Power5 9111-285 1,9 GHz

Hi , I am planing to buy IBM pSeries Power5 9111-285 1,9 GHz but I am confused with few things. I would be happy if you could clear it up for me ? 1.Do I have to buy some license in order to create Lpars ? 2.Do I have to buy some license in order to use HMC , micro - partiocioning , VIOS...

LEARN ABOUT NETBSD

arcmsr

ARCMSR(4)						   BSD Kernel Interfaces Manual 						 ARCMSR(4)

NAME

     arcmsr -- Areca Technology Corporation SATA/SAS RAID controller

SYNOPSIS

     arcmsr* at pci? dev ? function ?

DESCRIPTION

     The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:

	   -   ARC-1110 PCI-X 4 Port SATA RAID Controller
	   -   ARC-1110ML PCI-X 4 Port SATA RAID Controller
	   -   ARC-1120 PCI-X 8 Port SATA RAID Controller
	   -   ARC-1120ML PCI-X 8 Port SATA RAID Controller
	   -   ARC-1130 PCI-X 12 Port SATA RAID Controller
	   -   ARC-1130ML PCI-X 12 Port SATA RAID Controller
	   -   ARC-1160 PCI-X 16 Port SATA RAID Controller
	   -   ARC-1160ML PCI-X 16 Port SATA RAID Controller
	   -   ARC-1170 PCI-X 24 Port SATA RAID Controller
	   -   ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
	   -   ARC-1202 PCI Express 2 Port SATA RAID Controller
	   -   ARC-1210 PCI Express 4 Port SATA RAID Controller
	   -   ARC-1220 PCI Express 8 Port SATA RAID Controller
	   -   ARC-1230 PCI Express 12 Port SATA RAID Controller
	   -   ARC-1230ML PCI Express 12 Port SATA RAID Controller
	   -   ARC-1231ML PCI Express 12 Port SATA RAID Controller
	   -   ARC-1260 PCI Express 16 Port SATA RAID Controller
	   -   ARC-1260ML PCI Express 16 Port SATA RAID Controller
	   -   ARC-1261ML PCI Express 16 Port SATA RAID Controller
	   -   ARC-1280 PCI Express 24 Port SATA RAID Controller
	   -   ARC-1280ML PCI Express 24 Port SATA RAID Controller
	   -   ARC-1680 PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680LP PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680i PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680x PCI Express 8 Port SAS RAID Controller
	   -   ARC-1681 PCI-X 8 Port SAS RAID Controller

     These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.

     arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.

     Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
     RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).

     When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
     the initialization is done.  A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
     lowing command (once the initialization is finished):

     $ scsictl scsibus0 scan any any

     The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
     bioctl(8) command.

EVENTS

     The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online.  The state-changed
     event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)

HISTORY

     The arcmsr driver first appeared in NetBSD 5.0.

AUTHORS

     The arcmsr driver was originally written for OpenBSD by David Gwynne.  It was ported to NetBSD and extended by Juan Romero Pardines.

BSD
								   March 3, 2008							       BSD