07-26-2009
sorry about that.
it is SunOS 5.9 and SAN Storage
---------- Post updated at 03:08 PM ---------- Previous update was at 03:07 PM ----------
root@production2p:${PWD}#/opt/QLogic_Corporation/SANsurferCLI/scli -do all rescan
The driver rescan operation finished successfully on HBA port 0.
The driver rescan operation finished successfully on HBA port 2.
The driver rescan operation finished successfully on HBA port 1.
The driver rescan operation finished successfully on HBA port 3.
root@production2p:${PWD}#vxdisk list | grep invalid
c3t4d39s2 auto:none - - online invalid
c3t4d40s2 auto:none - - online invalid
c3t4d104s2 auto:none - - online invalid
c3t4d150s2 auto:none - - online invalid
c3t14d52s2 auto:none - - online invalid
c3t14d53s2 auto:none - - online invalid
c3t18d51s2 auto:none - - online invalid
root@production2p:${PWD}#vxdisk list c3t4d150s2
Device: c3t4d150s2
devicetag: c3t4d150
type: auto
info: format=none
flags: online ready private autoconfig invalid
pubpaths: block=/dev/vx/dmp/c3t4d150s2 char=/dev/vx/rdmp/c3t4d150s2
guid: -
udid: IBM%5F2107%5F75DLKK1%5F6005076305FFC21400000000000060B3
site: -
Multipathing information:
numpaths: 2
c3t4d150s2 state=enabled
c4t5d150s2 state=enabled
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)
Discussion started by: pressy
3 Replies
2. Solaris
I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
Discussion started by: Remi
2 Replies
3. Solaris
hey guys i got this in my logs what does this mean: (1 Reply)
Discussion started by: sbn
1 Replies
4. AIX
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Discussion started by: solaix14
3 Replies
5. Solaris
Hello all,
I need find in my OS (Sun10) on LUN 1Tb with WWN 6005-08b4-0010-7137-0000-e000-0076-0000 (HBA)
How do it?,
Thanks, (3 Replies)
Discussion started by: aav1307
3 Replies
6. HP-UX
HI all,
I am confused when I am seeing the output of bdf command ioscan -fnC disk, there is no same files which i have seen in bdf output and ioscan output...One volume was mounted in one folder called /teldb and device file path was /dev/disk/disk48. The same i didnt found in ioscan disk... (6 Replies)
Discussion started by: selvaforum
6 Replies
7. AIX
Hi,
I am not getiting lun id information on VIO Server. I have used the command fget_config command.
just showing # prompt.
I would like know wheather any other command is there equiv of fget_config
which will display lun id? (4 Replies)
Discussion started by: manoj.solaris
4 Replies
8. Solaris
Dear all,
i want to get the LUN ID for some disks in solaris 10
what commands options for the MPXIO and inq i want these utilities only
because i don't have solution enabler or powerpath
BR, (1 Reply)
Discussion started by: maxim42
1 Replies
9. UNIX for Dummies Questions & Answers
how do I know which hdisk from "lsdev -Cc disk" is my LUN on NetApp after zoning from SAN switch?
is it "MPIO other FC SCSI Disk Drive"? (1 Reply)
Discussion started by: malayo
1 Replies
10. HP-UX
Hello folks,
I have Hp.ux 11.31 and I need know how formating in OS new LUN disk attach to system
e.g. the wwid:
# scsimgr lun_map -D /dev/rdisk/disk4
LUN PATH INFORMATION FOR LUN : /dev/rdisk/disk4
Total number of LUN paths = 2
World Wide Identifier(WWID) =... (3 Replies)
Discussion started by: aav1307
3 Replies
TARG(4) BSD Kernel Interfaces Manual TARG(4)
NAME
targ -- SCSI target emulator driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device targ
DESCRIPTION
The targ driver provides an interface for usermode programs to emulate SCSI target devices. A sample program that emulates a disk drive
(similar to da(4)) can be found in /usr/share/examples/scsi_target.
The targ driver supplies control devices, /dev/targ0, /dev/targ1, etc. If a device is already in use, open(2) will fail and errno will be
set to EBUSY. After opening the device, the file descriptor must be bound to a specific bus/target/LUN and enabled to process CCBs using the
TARGIOCENABLE ioctl. The process then uses write(2) to send CCBs to the SIM and poll(2) or kqueue(2) to see if responses are ready. Point-
ers to completed CCBs are returned via read(2). Any data transfers requested by the user CCBs are done via zero-copy IO.
IOCTLS
The following ioctl(2) calls are defined in the header file <cam/scsi/scsi_targetio.h>.
TARGIOCENABLE (struct ioc_enable_lun) Enable target mode on the LUN specified by the following structure:
struct ioc_enable_lun {
path_id_t path_id;
target_id_t target_id;
lun_id_t lun_id;
int grp6_len;
int grp7_len;
};
The selected path (bus), target, and LUN must not already be in use or EADDRINUSE is returned. If grp6_len or grp7_len are
non-zero, reception of vendor-specific commands is enabled.
TARGIOCDISABLE Disable target mode and abort all pending CCBs. The CCBs may optionally be read as they complete. TARGIOCENABLE can then be
called to activate a different LUN. Multiple disable calls have no effect. The close(2) system call automatically disables
target mode if enabled.
TARGIOCDEBUG (int) Enables CAM_PERIPH debugging if the argument is non-zero, otherwise disables it.
FILES
<cam/scsi/scsi_targetio.h> describes the usermode interface.
/sys/cam/scsi/scsi_target.c is the driver source file.
/dev/targ* are the control devices.
SEE ALSO
/usr/share/examples/scsi_target, ahc(4), isp(4), scsi(4)
FreeBSD Target Information, http://www.root.org/~nate/freebsd/.
AUTHORS
The targ driver first appeared in FreeBSD 3.0 and was written by Justin T. Gibbs. It was rewritten for FreeBSD 5.0 by Nate Lawson
<nate@root.org>.
BUGS
Currently, only the ahc(4) and isp(4) drivers fully support target mode.
The ahc(4) driver does not support tagged queuing in target mode.
BSD
November 15, 2002 BSD