07-26-2009
sorry about that.
it is SunOS 5.9 and SAN Storage
---------- Post updated at 03:08 PM ---------- Previous update was at 03:07 PM ----------
root@production2p:${PWD}#/opt/QLogic_Corporation/SANsurferCLI/scli -do all rescan
The driver rescan operation finished successfully on HBA port 0.
The driver rescan operation finished successfully on HBA port 2.
The driver rescan operation finished successfully on HBA port 1.
The driver rescan operation finished successfully on HBA port 3.
root@production2p:${PWD}#vxdisk list | grep invalid
c3t4d39s2 auto:none - - online invalid
c3t4d40s2 auto:none - - online invalid
c3t4d104s2 auto:none - - online invalid
c3t4d150s2 auto:none - - online invalid
c3t14d52s2 auto:none - - online invalid
c3t14d53s2 auto:none - - online invalid
c3t18d51s2 auto:none - - online invalid
root@production2p:${PWD}#vxdisk list c3t4d150s2
Device: c3t4d150s2
devicetag: c3t4d150
type: auto
info: format=none
flags: online ready private autoconfig invalid
pubpaths: block=/dev/vx/dmp/c3t4d150s2 char=/dev/vx/rdmp/c3t4d150s2
guid: -
udid: IBM%5F2107%5F75DLKK1%5F6005076305FFC21400000000000060B3
site: -
Multipathing information:
numpaths: 2
c3t4d150s2 state=enabled
c4t5d150s2 state=enabled
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)
Discussion started by: pressy
3 Replies
2. Solaris
I just installed IBMsdd on Solaris diver along with the patches recommended. I also installed 2 - 2Gigs qlogic fiber cards & the corresponding pkges for the cards.
What command can I use to scan this LUN disks from my Soalris servers. Solaris doen't seem to be seeing this disks presented on it.... (2 Replies)
Discussion started by: Remi
2 Replies
3. Solaris
hey guys i got this in my logs what does this mean: (1 Reply)
Discussion started by: sbn
1 Replies
4. AIX
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Discussion started by: solaix14
3 Replies
5. Solaris
Hello all,
I need find in my OS (Sun10) on LUN 1Tb with WWN 6005-08b4-0010-7137-0000-e000-0076-0000 (HBA)
How do it?,
Thanks, (3 Replies)
Discussion started by: aav1307
3 Replies
6. HP-UX
HI all,
I am confused when I am seeing the output of bdf command ioscan -fnC disk, there is no same files which i have seen in bdf output and ioscan output...One volume was mounted in one folder called /teldb and device file path was /dev/disk/disk48. The same i didnt found in ioscan disk... (6 Replies)
Discussion started by: selvaforum
6 Replies
7. AIX
Hi,
I am not getiting lun id information on VIO Server. I have used the command fget_config command.
just showing # prompt.
I would like know wheather any other command is there equiv of fget_config
which will display lun id? (4 Replies)
Discussion started by: manoj.solaris
4 Replies
8. Solaris
Dear all,
i want to get the LUN ID for some disks in solaris 10
what commands options for the MPXIO and inq i want these utilities only
because i don't have solution enabler or powerpath
BR, (1 Reply)
Discussion started by: maxim42
1 Replies
9. UNIX for Dummies Questions & Answers
how do I know which hdisk from "lsdev -Cc disk" is my LUN on NetApp after zoning from SAN switch?
is it "MPIO other FC SCSI Disk Drive"? (1 Reply)
Discussion started by: malayo
1 Replies
10. HP-UX
Hello folks,
I have Hp.ux 11.31 and I need know how formating in OS new LUN disk attach to system
e.g. the wwid:
# scsimgr lun_map -D /dev/rdisk/disk4
LUN PATH INFORMATION FOR LUN : /dev/rdisk/disk4
Total number of LUN paths = 2
World Wide Identifier(WWID) =... (3 Replies)
Discussion started by: aav1307
3 Replies
CHCPU(8) System Administration CHCPU(8)
NAME
chcpu - configure CPUs
SYNOPSIS
chcpu -c|-d|-e|-g cpu-list
chcpu -p mode
chcpu -r|-h|-V
DESCRIPTION
chcpu can modify the state of CPUs. It can enable or disable CPUs, scan for new CPUs, change the CPU dispatching mode of the underlying
hypervisor, and request CPUs from the hypervisor (configure) or return CPUs to the hypervisor (deconfigure).
Some options have a cpu-list argument. Use this argument to specify a comma-separated list of CPUs. The list can contain individual CPU
addresses or ranges of addresses. For example, 0,5,7,9-11 makes the command applicable to the CPUs with the addresses 0, 5, 7, 9, 10, and
11.
OPTIONS
-c, --configure cpu-list
Configure the specified CPUs. Configuring a CPU means that the hypervisor takes a CPU from the CPU pool and assigns it to the vir-
tual hardware on which your kernel runs.
-d, --disable cpu-list
Disable the specified CPUs. Disabling a CPU means that the kernel sets it offline.
-e, --enable cpu-list
Enable the specified CPUs. Enabling a CPU means that the kernel sets it online. A CPU must be configured, see -c, before it can be
enabled.
-g, --deconfigure cpu-list
Deconfigure the specified CPUs. Deconfiguring a CPU means that the hypervisor removes the CPU from the virtual hardware on which
the Linux instance runs and returns it to the CPU pool. A CPU must be offline, see -d, before it can be deconfigured.
-p, --dispatch mode
Set the CPU dispatching mode (polarization). This option has an effect only if your hardware architecture and hypervisor support
CPU polarization. Available modes are:
horizontal The workload is spread across all available CPUs.
vertical The workload is concentrated on few CPUs.
-r, --rescan
Trigger a rescan of CPUs. After a rescan, the Linux kernel recognizes the new CPUs. Use this option on systems that do not auto-
matically detect newly attached CPUs.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
RETURN CODES
chcpu has the following return codes:
0 success
1 failure
64 partial success
AUTHOR
Heiko Carstens <heiko.carstens@de.ibm.com>
COPYRIGHT
Copyright IBM Corp. 2011
SEE ALSO
lscpu(1)
AVAILABILITY
The chcpu command is part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
/util-linux/>.
util-linux July 2014 CHCPU(8)