07-26-2009
It can certainly be done. I have numerous Solaris servers booting from NetApp luns.
It has been quite a while since I was involved in setting this up here, so some of the steps required may have changed. For Solaris 10, section 2.1 is definitely not required.
There is an old article here:
BigAdmin Feature Article: Automating the Installation of an FC-Fabric SAN Booted System
Also there were a number of the versions of FCode for some HBAs that prevented SAN boot, so you might also need to make sure that you have working versions.
9 More Discussions You Might Find Interesting
1. HP-UX
Hi all,
I am trying to configure my HPUX host 11.31 IA64 to boot from a LUN for EMC clariion CX3-80 (Flaire PNR 26).
I am following the below mentioned steps..
vi /tmp/idf
3
EFI 500MB
HPUX 100%
HPSP 400MB
idisk -f /tmp/idf -w /dev/rdisk/diskxxx
insf -e
pvcreate -B... (0 Replies)
Discussion started by: barun agarwal
0 Replies
2. Red Hat
hi all,
i have qle 2460 hba card in my server. and i have a lun from promise array from raid 0. I want to boot my OS (rhel5.2-64 bit) lun on a dell t300 server. can some one help me on this please asap.. (0 Replies)
Discussion started by: navadeep
0 Replies
3. UNIX for Advanced & Expert Users
Hi There,
Has anyone had any luck with or know how to get AIX 5+ to boot from a HP EVA 6000 SAN?
The servers used here will be P Class Blades
My initial searches on this so far did not bring results so I am guessing this may not be possible on HP SAN's but please let me know if I am... (0 Replies)
Discussion started by: fazzasx
0 Replies
4. AIX
Hello, we have a wierd and urgent problem, with a few of our p595 LPARs running AIX 5.3. The LPARs ran AIX 5.3 TL 7 and booted off EMC SAN disks, using EMC Powerpath. Every boot we run "pprootdev on" and "pprootdev fix". We can issue "bosboot -a" and we can reboot the machines.
Now, on two... (2 Replies)
Discussion started by: rwesterik
2 Replies
5. Solaris
I have a solaris 10 box which does not have internal disks it has just a single dual port HBA card. Storage team has assigned 2 LUNs to the system and i can see it from the probe-scsi-all
/pci@3,700000/SUNW,emlxs@0,1
Device PortID 10100 WWPN 5006016941e0a08d
LUN 0 Disk DGC ... (0 Replies)
Discussion started by: fugitive
0 Replies
6. Solaris
How to identify the server is BOOT FROM SAN.
Also how one can find from which device it is booted?
Thanks
Rahul
Double post, continued here (0 Replies)
Discussion started by: rahul.kurumkar
0 Replies
7. Red Hat
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Discussion started by: rahul.kurumkar
1 Replies
8. AIX
Hi all ,
we're implementing a new NPIV infrastructure with AIX san boot on EMC2 VMAX 5876 , for economic reason , they don't wont to install Powerpath multipath sw , but only ODM drivers from EMC2 , this behavior is supported and can work?!
in the past we implemented NPIV on DS8000 family... (2 Replies)
Discussion started by: BabylonRocker76
2 Replies
9. Red Hat
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Discussion started by: rbatte1
4 Replies
LEARN ABOUT OPENSOLARIS
grub
grub(5) Standards, Environments, and Macros grub(5)
NAME
grub - GRand Unified Bootloader software on Solaris
DESCRIPTION
The current release of the Solaris operating system is shipped with the GRUB (GRand Unified Bootloader) software. GRUB is developed and
supported by the Free Software Foundation.
The overview for the GRUB Manual, accessible at www.gnu.org, describes GRUB:
Briefly, a boot loader is the first software program that runs when a computer starts. It is responsible for loading and transferring con-
trol to an operating system kernel software (such as Linux or GNU Mach). The kernel, in turn, initializes the rest of the operating system
(for example, a GNU [Ed. note: or Solaris] system).
GNU GRUB is a very powerful boot loader that can load a wide variety of free, as well as proprietary, operating systems, by means of chain-
loading. GRUB is designed to address the complexity of booting a personal computer; both the program and this manual are tightly bound to
that computer platform, although porting to other platforms may be addressed in the future. [Ed. note: Sun has ported GRUB to the Solaris
operating system.]
One of the important features in GRUB is flexibility; GRUB understands filesystems and kernel executable formats, so you can load an arbi-
trary operating system the way you like, without recording the physical position of your kernel on the disk. Thus you can load the kernel
just by specifying its file name and the drive and partition where the kernel resides.
Among Solaris machines, GRUB is supported on x86 platforms. The GRUB software that is shipped with Solaris adds two utilities not present
in the open-source distribution:
bootadm(1M) Enables you to manage the boot archive and make changes to the GRUB menu.
installgrub(1M) Loads the boot program from disk.
Both of these utilities are described in Solaris man pages.
Beyond these two Solaris-specific utilities, the GRUB software is described in the GRUB manual, a PDF version of which is available from
the Sun web site. Available in the same location is the grub(8) open-source man page. This man page describes the GRUB shell.
SEE ALSO
boot(1M), bootadm(1M), installgrub(1M)
Solaris Express Installation Guide: Basic Installations
System Administration Guide: Basic Administration
http://www.gnu.org/software/grub
SunOS 5.11 21 Apr 2005 grub(5)