07-13-2009
Hello i think this may help you.
nano /etc/sysconfig/network/routes
route add -net 10.164.0.0/21 gw 10.164.0.135
route add -net 192.168.1.0/24 gw 10.164.0.135
route add -net 30.1.0.0/16 gw 10.164.0.135
route add defaltul gw 10.164.0.135/25
If this does not work, could you add the netstat -rn and the route output to the case and we can review better the issue, and also you can add the interfaces outputs so we can verify if they are configured to support what you request.
Best regards,
Luis
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Can anyone help with the following;
I am working on a unix server (Apple OS X Server). We have two network cards in the server. Both cards are on different subnets i.e en1 is on 192.168.10.10/24 and the built in ethernet is on 10.10.150.10/24. From a computer plugged into en1 (and set to ip... (5 Replies)
Discussion started by: mrthrt
5 Replies
2. UNIX for Advanced & Expert Users
Hi,
in which file and how shuold be decalred a gateway and its IP adresse ?
Where and how add a gateway ?
Many thanks before. (4 Replies)
Discussion started by: big123456
4 Replies
3. Linux
Hello Friends
I have two network cards
eth0 192.168.100.1
eth1 10.0.0.1
There NIC connect with diff. LAN
I want to make my Linux machine as a Router, Please tell me
using
IPTABLES command
ROUTE command
:) (2 Replies)
Discussion started by: jaibw
2 Replies
4. IP Networking
I am using RedHat Linux 9, In this box their are two lan intefaces.
eth0 ====> LAN
192.168.100.100
255.255.255.0
eth1 ====> Internet
Static IP
255.255.255.0
59.144.168.226 (Gateway)
I want to define a gateway 59.144.168.226 for my LAN... (2 Replies)
Discussion started by: jaibw
2 Replies
5. AIX
Hello,
I've moved to a new network with multiple AIX box's. Most of them are working fine and dandy.
On one box I need to set up a static route to a gateway.. no problem right?
Whenever I add the route it appears in the routing table as UGc and then begins adding new entries to the... (1 Reply)
Discussion started by: joshstar14
1 Replies
6. IP Networking
I have run into a wall troubleshooting a Centos 5 networking issue. Hoping someone can assist.
I've got a box with two vlans trunked over bond0
bond0 Link encap:Ethernet HWaddr 00:22:64:C1:D6:60
inet6 addr: fe80::222:64ff:fec1:d660/64 Scope:Link ... (0 Replies)
Discussion started by: creedog
0 Replies
7. UNIX for Dummies Questions & Answers
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
Discussion started by: karlochacon
7 Replies
8. IP Networking
Hi, The default gateway (172.17.220.1) cannot be pinged via the default interface bond0 (172.17.220.231), but can be pinged via interface eth1 (10.201.135.73).
# ping -I eth1 172.17.220.1
PING 172.17.220.1 (172.17.220.1) from 10.201.135.73 eth1: 56(84) bytes of data.
64 bytes from... (4 Replies)
Discussion started by: aixlover
4 Replies
9. Solaris
we are not able to ping client server (falcon-ebr.sbms.bsc.com) from netbackup master server (135.179.96.122 tsprd-ebr.edc.single.net)
However from client server we are able to ping the master Server.
Please assist on this (1 Reply)
Discussion started by: Rahul466
1 Replies
10. IP Networking
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies
LEARN ABOUT PLAN9
tc-route
Route classifier in tc(8) Linux Route classifier in tc(8)
NAME
route - route traffic control filter
SYNOPSIS
tc filter ... route [ from REALM | fromif TAG ] [ to REALM ] [ classid CLASSID ] [ action ACTION_SPEC ]
DESCRIPTION
Match packets based on routing table entries. This filter centers around the possibility to assign a realm to routing table entries. For
any packet to be classified by this filter, a routing table lookup is performed and the returned realm is used to decide on whether the
packet is a match or not.
OPTIONS
action ACTION_SPEC
Apply an action from the generic actions framework on matching packets.
classid CLASSID
Push matching packets into the class identified by CLASSID.
from REALM
fromif TAG
Perform source route lookups. TAG is the name of an interface which must be present on the system at the time of tc invocation.
to REALM
Match if normal (i.e., destination) routing returns the given REALM.
EXAMPLES
Consider the subnet 192.168.2.0/24 being attached to eth0:
ip route add 192.168.2.0/24 dev eth0 realm 2
The following route filter will then match packets from that subnet:
tc filter add ... route from 2 classid 1:2
and pass packets on to class 1:2.
NOTES
Due to implementation details, realm values must be in a range from 0 to 255, inclusive. Alternatively, a verbose name defined in
/etc/iproute2/rt_realms may be given instead.
SEE ALSO
tc(8), ip-route(8)
iproute2 21 Oct 2015 Route classifier in tc(8)