cfgadm -avl c1
Output is :
************************
AP_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c1 connected unconfigured unknown
Dec 31 1969 scsi-bus n /devices/pci@1f,4000/scsi@3,1:scsi
ls -l /dev/dsk/c1t1d0
/dev/dsk/c1t1d0: No such file or directory
It looks a little bit strange... Perform also the next commant and post results:
What are the options on upgrading disk space in an Ultra 10 workstation? Sun states they are EIDE drives, are they standard or Sun specific?
Thanks (1 Reply)
hi-
I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming... (9 Replies)
I am interested in booting up my unix computer by connecting an external SCSI drive( intergraph) to it. The unix box is also an intergraph computer. Whenever I boot it, it gives me an error that says Drive not ready, Insert Boot Diskette in A. What am I doing wrong?
Any input would be... (3 Replies)
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
I will be honest I am quite new to UNIX and Solaris so this may be a simple thing.
I have just purchased a Sun (rebranded HP obviously) DAT DDS3 SCSI tape drive for my Sun Ultra 10 running Solaris 10.
I have previously fitted a SCSI card to the box which has configured ok and can be seen from... (1 Reply)
Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a... (11 Replies)
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
To Solaris 8 Experts,
Please let me know what's the best method / procedure as well as the Solaris 8 commands for accomplishing the following tasks on a production Sun Enterprise 250 Server running Sun Solaris 8 Operating System:
1. Make an exact image/copy of the SCSI Hard Drive in the... (3 Replies)
I have connected an external hard drive. I can't find it.
Both ls /media, fdisk -l and ls /dev show nothing.
TIA (3 Replies)
Discussion started by: Meow613
3 Replies
LEARN ABOUT NETBSD
esiop
ESIOP(4) BSD Kernel Interfaces Manual ESIOP(4)NAME
esiop -- Enhanced Symbios Logic/NCR 53c8xx SCSI driver
SYNOPSIS
esiop* at pci? dev ? function ?
options SIOP_SYMLED
scsibus* at esiop?
DESCRIPTION
The esiop driver provides improved support over siop(4) for the Symbios Logic/NCR 53x8xx series of SCSI controller chips:
- 53c825 and 53c825a (Fast-Wide SCSI)
- 53c875 and 53c875j (Ultra-Wide SCSI)
- 53c876 (Dual Ultra-Wide SCSI)
- 53c885 (Ultra-Wide SCSI and Ethernet)
- 53c895 (Ultra2-Wide SCSI)
- 53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
- 53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
- 53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
Older adapters are supported by the siop(4) driver.
The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters.
At this time only the 53c895 based Symbios and Tekram adapters are known to require this.
SEE ALSO cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), siop(4), st(4), uk(4)HISTORY
The esiop driver first appeared in NetBSD 1.6.
AUTHORS
The esiop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.
BSD April 23, 2002 BSD