07-12-2009
what dvd drive? is it an external device? how is it connected? can you see the device from OBP level with "probe-ide" or "probe-scsi-all" command?
10 More Discussions You Might Find Interesting
1. Solaris
Netra T1 running Solaris 2.6 with following DVD installed:
c0t6d0 Soft Errors: 131 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1401 Revision: 1007
I know the cdrw command isn't in Solaris until version 8 and DVD is suppose to be udfs (not supported... (3 Replies)
Discussion started by: RTM
3 Replies
2. Solaris
Hi there
In our Data centre we have a mixture of SPARCS running from v100 and ultra10's to v800 and v1250 boxes we also have a large amount of x86 X2100 and X4100 boxes
I am looking to purchase an external DVD-ROM drive that we can plug into the back of any of the boxes if we need to (I... (2 Replies)
Discussion started by: hcclnoodles
2 Replies
3. Solaris
Hello,
We have a Sun Enterprise 4500. I checked the product manual from SUN's site and it says it has a DVD-ROM.
I downloaded Solaris 10 DVD image and burned it to a DVD and put it into the box but I don't see anyting in the /cdrom folder.
Is there a command I can use to confirm if I have... (5 Replies)
Discussion started by: zafyil
5 Replies
4. HP-UX
Please help me >
How to diag the external DVD-ROM drive issue whether it is working or not? on HP 9000 server rp7400
I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device only showing all disks >... (0 Replies)
Discussion started by: tpuser
0 Replies
5. UNIX for Advanced & Expert Users
old clunker - rp74000
How to diag the external DVD-ROM drives issue whether it is working or not? on HP 9000 server rp7400
Please help me > I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device... (1 Reply)
Discussion started by: tpuser
1 Replies
6. Solaris
Hi All,
I'm a total noob when it comes to troubleshooting Sun hardware issues, however, I've been tasked with just a task. How can I verify if the DVD rom is working in a Sun system? We've put in the dvd, but can't do anything. This is from command line.
Thanks.
---------- Post updated at... (1 Reply)
Discussion started by: bbbngowc
1 Replies
7. Solaris
Is there anyway to get a USB DVD ROM to work on a V210/V240/V440 SPARC systems for initial installation? I'm drawing a blank and I can't seem to find any documentation on this. (3 Replies)
Discussion started by: adelsin
3 Replies
8. Solaris
Hi,
I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation.
When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and... (8 Replies)
Discussion started by: greypilgrim
8 Replies
9. AIX
I was having problems with the DVD-ROM drive not being recognized. I thought it was a configuration issue, but it appears to be a hardware problem. Now the system hangs at boot. This last time I tried it, it said:
At which point, it hangs. (1 Reply)
Discussion started by: smithfarm
1 Replies
10. Hardware
Here is my conundrum . I am unable to access my cd or dvd
after I supposedly alter the BIOS setting to enable a "Live"
CD or DVD to be used.
Would ,changing the Hard Drive or Motherboard remedy the situation.
Thanking you,
katosan:wall::wall: (2 Replies)
Discussion started by: katosan
2 Replies
LEARN ABOUT DEBIAN
tapset::scsi
TAPSET::SCSI(3stap) TAPSET::SCSI(3stap)
NAME
tapset::scsi - systemtap scsi probe points
DESCRIPTION
This family of probe points is used to probe the SCSI activities. It contains the following probe points:
scsi.ioentry
Fires when SCSI mid layer prepares a SCSI request
Arguments:
disk_major
The major number of the disk
disk_minor
The minor number of the disk
device_state
The current state of the device. The possible values could be:
SDEV_CREATED = 1, /* device created but not added to sysfs
* Only internal commands allowed (for inq) */
SDEV_RUNNING = 2, /* device properly configured
* All commands allowed */
SDEV_CANCEL = 3, /* beginning to delete device
* Only error handler commands allowed */
SDEV_DEL = 4, /* device deleted
* no commands allowed */
SDEV_QUIESCE = 5, /* Device quiescent. No block commands
* will be accepted, only specials (which
* originate in the mid-layer) */
SDEV_OFFLINE = 6, /* Device offlined (by error handling or
* user request */
SDEV_BLOCK = 7, /* Device blocked by scsi lld. No scsi
* commands from user or midlayer should be issued
* to the scsi lld. */
scsi.iodispatching
Fires when the SCSI mid layer dispatches a SCSI command to the low level driver
Arguments:
host_no
The host number
channel
The channel number
lun
The lun number
dev_id
The scsi device id
device_state
The current state of the device.
data_direction
The data_direction specifies whether this command is from/to the device.
The possible values could be:
DMA_BIDIRECTIONAL = 0,
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
DMA_NONE = 3,
request_buffer
The request buffer address
req_bufflen
The request buffer length
scsi.iodone
Fires when a SCSI command is done by low level driver and enqueued into the done queue.
Arguments:
host_no
The host number
channel
The channel number
lun
The lun number
dev_id
The scsi device id
device_state
The current state of the device
data_direction
The data_direction specifies whether this command is from/to the device.
scsi.iocompleted
Fires when SCSI mid layer runs the completion processing for block device I/O requests
Arguments:
host_no
The host number
channel
The channel number
lun
The lun number
dev_id
The scsi device id
device_state
The current state of the device
data_direction
The data_direction specifies whether this command is from/to the device.
goodbytes
The bytes completed.
SEE ALSO
stap(1), stapprobes(3stap)
IBM
TAPSET::SCSI(3stap)