07-06-2009
Hi Otheus,
No,My /etc/passwd file doesn't have this "+:::" at the end of the file.
Nor do i find any issues with /etc/hosts.allow/deby file.
Yes,as you said this could be a DNS issue as i find that ping to hostnames are responding but taking a lot of time.
But,What should i check for from DNS server end? Can you please help me on this statement -(2) the reverse-lookups (see resolv.conf and see that the remote host has a reverse-IP map) ?
Note -I am facing this issue in only 4 of my servers(from a farm of around 30).These 4 servers are in a separate VLAN.
Thanks
HG
10 More Discussions You Might Find Interesting
1. Linux
Hi,
I have a Linux 8.0 Redhat installed as a server. The samba configuration was done to allowed logging in to the server from windows workstations. I have a LAN, WAN connection. However, any time the workstation is trying to make a WAN connection it slow down all the systems on the network.
Can... (0 Replies)
Discussion started by: kayode
0 Replies
2. SCO
I have attempted to2find answers to this question:
When logging into tty01 the system will take 5 to 10 seconds to display each character typed. Each other terminal will login correctly and display correctly2but not the first terminal. Rebooting was suggested on several sites and this has been... (2 Replies)
Discussion started by: ypanic
2 Replies
3. HP-UX
We recently moved from a Open VMS OS to HP-UX. When printing labels on Intermec 3400 printers we are seeing a delay of up to 3 minutes before labels print. We have printers going through a DEC Term servers and Jet Direct boxes. Any suggestions what might be causing this delay? (4 Replies)
Discussion started by: BIGJIM
4 Replies
4. Solaris
Hello World ~
HW : SUN Fire V240
OS : Solaris 8
Error message prompts 'rmclomv ... SC login failure ...' on terminal.
and
Error Message prompts continually 'SC Login Failure for user Please login:' on Single Mode(init S)
The System is in normal operation, though
In case of rain, Can... (1 Reply)
Discussion started by: lifegeek
1 Replies
5. Solaris
Hi,
We have got 2 solaris boxes, since our inhouse application has certified on solaris environment and now we need to certify the performance of that application on Solaris environment.
1 box we have installed websphere and the other box we have installed Oracle 10.2.0.3. both are 64bit.
... (5 Replies)
Discussion started by: mp_rocket
5 Replies
6. Solaris
Hi
I have a Solaris 10 NIS server and more than 250 NIS clients out of these there are 5 main application servers, and whenever there is any compilation happens on any of the application servers (which are acting as NIS clients) entire NIS performance will come down.Can some one help me to fix... (5 Replies)
Discussion started by: nithnara
5 Replies
7. Solaris
Hi admins,
After changing the ip address(temperorily) ssh to that server is very slow(exactly 25 sec).But from this new ip i can ssh to other servers without any delay problem.
debug1: match: Sun_SSH_1.1.1 pat Sun_SSH_1.1.1*
debug1: Enabling compatibility mode for protocol 2.0
debug1:... (2 Replies)
Discussion started by: newsol
2 Replies
8. Solaris
Hi!
I have a m3000 server with solaris 10. Clients connecting to server using Xmanager. But when they open a Java based application its very slow and some times hanging. But when I tried with VNC it works fine. Is this a BUG in Xmanager? Or Is there any method to solve this?
Thanks,
Charith (3 Replies)
Discussion started by: charith.upendra
3 Replies
9. Solaris
Need assitance in troubleshooting steps . Below is the issue
I have LDOM which has 4 zones on it . One zone logging into the server takes 13sec where as other zones are quick .
Troubleshooting steps which I did
- Checked /var/tmp . Not many files
- We have LDAP but thought that wouldnt be... (7 Replies)
Discussion started by: ajayram_arya
7 Replies
10. AIX
Oracle database is facing slowness issues frequently on AIX server. So can anybody suggest how to fix these issues from OS end? Do we need to tune any parameter in AIX to resolve this issue?
Please post in an adequate forum! (1 Reply)
Discussion started by: vithal
1 Replies
LEARN ABOUT CENTOS
fence_ilo_mp
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
NAME
fence_ilo_mp - Fence agent for HP iLO MP
DESCRIPTION
fence_ilo_mp accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_ilo_mp can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
PARAMETERS
-a, --ip=[ip]
IP Address or Hostname This parameter is always required.
-l, --username=[name]
Login Name This parameter is always required.
-p, --password=[password]
Login password or passphrase
-x, --ssh
SSH connection
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])
-u, --ipport=[port] TCP/UDP port to use (default 23, 22 if --ssh
TCP/UDP port to use for connection with device (Default Value: 23)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-S, --password-script=[script]
Script to retrieve password
-k, --identity-file=[filename]
Identity file for ssh
--ssh-options=[options]
SSH options to use
-o, --action=[action]
Fencing Action (Default Value: reboot)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 5)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
secure SSH connection
cmd_prompt
Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])
ipport TCP/UDP port to use for connection with device (Default Value: 23)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
passwd_script
Script to retrieve password
identity_file
Identity file for ssh
ssh_options
SSH options to use
action Fencing Action (Default Value: reboot)
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 5)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_ilo_mp (Fence Agent) 2009-10-20 FENCE_AGENT(8)