Need Help to create LOM Cable Netra x1 Post: 302327859

10 More Discussions You Might Find Interesting

1. Solaris

Is the cable you are using a null modem cable or a modem cable

Hi all, Is there any difference between a null modem cable or a modem cable ? i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup. please correct if i am wrong, thks

2. Solaris

LOM device

All, I am getting the following message on the system post for Solaris 9: Unknown or badly programmed LOM device This is a SunFire 240 server which I just built out. Is there any way to fix this problem? Thanks, Mike

3. Solaris

Netra T1 LOM Password Reset

Hello All, I had bought Netra T1 AC200 couple of months ago and has setup a user and password in LOMlite but I forgot the password. when i connect to the server i get the LOMlite prompt and i cant connect to the Serial console (there is no prompt). I have tried the JP13 JP14 and JP15...

4. Solaris

LOM password

Hello, I need to run several command under LOM from unix shell. the first command is resetsc -y and then I required to enter admin password. Is there any way to make it with a script like: #. <<LOM resetsc -y admin password LOM Is the password will accepted in that way ? ...

5. Solaris

lom to ok prompt in netra 1280

HI group, Can anyone please suggest what can be the problem when we send poweron command on lom it again comes to lom and show following error what does it means lom>poweron /N0/PS0: already on /N0/PS1: already on /N0/PS2: already on /N0/PS3: already on Powering boards on ... Tue Dec...

6. Solaris

Netra V440 & Netra 1290 keyswitch

Hello, I wrote a script which monitor the keyswitch state repeatedly each 10 minutes. I'm extracting the keyswitch status by using prtdiag. The script works fine for Netra v440 , but I found that prtdiag under Netra 1290 don't give keyswitch status. unlike Netra 440 server , I found that...

7. Solaris

help reset netra T1 lom admin password

Can someone please help here on how to reset a T1 lom password? I have tried the JP13 an try to find lom.conf in scadm dir but lom.conf is not on the machine ,some help thanks

8. Red Hat

Different hostnames with reboot while lan cable, no lan cable

I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable Reboot with lan cable: The hostname is ubunut Unable to connect Oracle database using sqlplus some times database is not...

9. Solaris

Netra X1 LOM: Unable to change any variable via the "set" command

I'm posting here as it didn't seem quite right in the hardware section (as it's LOM commands). My apologies if I have that wrong though :) I've finally gotten round to configuring the LOM on my Netra X1, but I can't get it to change the hostname via the "set" command: lom>show hostname...

10. Hardware

How to reset lom password in netra T1?

Hello, I bought Netra T1 some time ago and set user and password in LOMlite.It seems that I forgot the password. When i connect to the server i get the LOMlite prompt. Can anybody tell me what is the proper sequence or the right way to reset the LOMlite password/account. Thanks

LEARN ABOUT MINIX

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)