|
|
Sponsored Content
Operating Systems
Solaris
configure tape drive to sun solaris 10
Post 302326034 by graboid888 on Wednesday 17th of June 2009 01:13:39 AM
06-17-2009
Thanks a lot guys.
I installed the sun device detection tool and verified that the pci scsi adapter is not compatible.
I may need to read more about beginner's guide in solaris as I really dont know where to start.
-----Post Update-----
another follow up guys..
i removed the scsi card that i originally installed.. it turned out that the card is only compatible with sun os 32-bit and not 64-bit..
when i changed it to another scsi card, i was able to detect it thru cfgadm, it shows the scsi-bus, and it says connected but the status is unknown.
i use devfsadm to configure it but no luck as there is no /dev/rmt/0 directory or if i use " for foo in 0 1 2 3 4 5 6 and check the status using mt -f status,it says not found.
i tried to use /var/adm to verify the activity of scsi drive but says cannot execute.
sorry guys, im at lost now after sun is able to detect the scsi card and tape drive., i guess the question now is how to configure the scsi and tape drive so that i can start a backup..
thanks again..
I installed the sun device detection tool and verified that the pci scsi adapter is not compatible.
I may need to read more about beginner's guide in solaris as I really dont know where to start.
-----Post Update-----
another follow up guys..
i removed the scsi card that i originally installed.. it turned out that the card is only compatible with sun os 32-bit and not 64-bit..
when i changed it to another scsi card, i was able to detect it thru cfgadm, it shows the scsi-bus, and it says connected but the status is unknown.
i use devfsadm to configure it but no luck as there is no /dev/rmt/0 directory or if i use " for foo in 0 1 2 3 4 5 6 and check the status using mt -f status,it says not found.
i tried to use /var/adm to verify the activity of scsi drive but says cannot execute.
sorry guys, im at lost now after sun is able to detect the scsi card and tape drive., i guess the question now is how to configure the scsi and tape drive so that i can start a backup..
thanks again..
|
|
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I am trying to configure DAT Tape drive on SUN E220 system but I don't have SUN keyboard. I am using a tty terminal k/b.
What are my alternavtives?
Is there any way to send interupts to the system on OK prompt using tty kb for probe SCSI.
Thanks in advance. (2 Replies)
Discussion started by: s_aamir
2 Replies
2. Filesystems, Disks and Memory
I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get... (1 Reply)
Discussion started by: brv
1 Replies
3. Filesystems, Disks and Memory
Hi all, please help I am stuck.
I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the... (4 Replies)
Discussion started by: dennis
4 Replies
4. UNIX for Dummies Questions & Answers
Hey guys,
I'm trying to mount a SUN DDS-2 tape drive on a SUN Ultra 80 machine running Solaris 9. I had the SCSI drive connected at time of install, I'm very new to Solaris so I don't know if Solaris would detect the drive like that and install some form of device driver. But, what im posting... (2 Replies)
Discussion started by: kingdbag
2 Replies
5. Solaris
hi,
need your help mentors I have external SCSI tape DRIVE COmpaq 15/30 GB DLT and I dont know how to install these and how to view if it is working. I'm also have another disk taken form my old sun and I want to use these also but my problem how I able to mount.
hope anyone can help me
... (9 Replies)
Discussion started by: eykyn17
9 Replies
6. AIX
Hi,
Help required!
How to mount internal tape drive of sun machine in AIX 5.3 (0 Replies)
Discussion started by: ashwin.krishna
0 Replies
7. Solaris
Can I do this live? Or, do I need to do a probe-scsi-all after doing a stop/A? (10 Replies)
Discussion started by: jgordon
10 Replies
8. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
9. Solaris
Hi all,
this time I'd need a help from an advanced Solaris system admin :rolleyes:
I attached a HP StorageWorks Ultrium 215 Tape Drives - Overview - c00059530 - HP Business Support Center to my Sun E220R and it got recognized immediately (probe-scsi-all).
Now the operating system boot process... (8 Replies)
Discussion started by: pseudocoder
8 Replies
10. Solaris
I have a SunFire V445 running Solaris 10 and am adding a Sun DLT tape drive. From the OK prompt the probe-scsi-all does see the drive and it is the proper target of 4. When I do the boot -- -r it does build the /dev/rmt directories correctly and the links to /devices appear correct as well. When I... (8 Replies)
Discussion started by: chastings
8 Replies
LEARN ABOUT REDHAT
tapeinfo
TAPEINFO(1) General Commands Manual TAPEINFO(1) NAME
tapeinfo - report SCSI tape device info SYNOPSIS
tapeinfo -f <scsi-generic-device> DESCRIPTION
The tapeinfo command reads various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It issues raw commands directly to the tape drive, using either the operating system's SCSI generic device ( e.g. /dev/sg0 on Linux, /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems. One good time to use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API, 'tapeinfo' will report a more exact description of what went wrong. Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information. OPTIONS
The first argument, given following -f , is the SCSI generic device corresponding to your tape drive. Consult your operating system's doc- umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0). Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls them. Under Linux, "cat /proc/scsi/scsi" will tell you what SCSI devices you have. BUGS AND LIMITATIONS
This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT). AVAILABILITY
tapeinfo is currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ . SEE ALSO
mt(1),mtx(1),scsitape(1) TAPEINFO1.0 TAPEINFO(1)