homeyjoe is right. You'll need to update the zoning on your SAN switches. You will also need to update the SAN device, and it's wwpn mappings. Each LUN is "mapped" to particular fiber adapter addresses called wwpn's (world wide port name). SAN switches have zones which are part of zonesets. At it's simplest, zones specify which fiber adapters can communicate. zones are grouped together in zonesets.
You can determine what the wwpn of the new fiber card is using
Code:
lscfg -vpl fcs1 | grep Network
Beyond that, your SAN vendor should be able to walk you through the re-mapping.
Altering zones and zonesets are potentially very hazardous tasks. If you have multiple devices, you can affect them all. Update/change these with extreme caution and only if you are completely sure of what you are doing.
Hello all,
Strange problem on p5 520 server. I've created two volume groups, filesystems, etc.. Everything working fine, without any problem. After some tests with a DS4300 unit I wanted to remove the volume groups, change the DS4300 configuration, and re-create a new volumegroup. However, I'm... (0 Replies)
Hi all.
I'm new to AIX, so... We are running a BCV process between two AIX 5 machines attached to EMC Clariion SAN. During the varyonvg portion of the BCV process, we experienced a failure due to the physical volume is marked missing (PVMISSING). What diagnostics can I run to see the missing... (2 Replies)
Hello,
On Aix 5.3, during importvg, the varyonvg fails:
importvg -y vgtest hdisk20
0516-013 varyonvg: The volume group cannot be varied on because
there are no good copies of the descriptor area.
When i use manually the command varyonvg -u -b -t vgtest to force, the vg can... (3 Replies)
Guys,
Need your help coz my server runs in local time GMT +8, but when client use ftp and login, the resulting timestamp seen in each file is in UTC format. We need to set that the time should be the same as GMT +8 when in ftp session.
I am using RHEL 5.3.
root@]# ll
total 1740... (2 Replies)
I have a Perl script that worked fine before moving it to justhost.com. It was on a Windows/Apache server. Just host is using UNIX. Other Perl scripts on other sites that were also moved work fine so I know Perl is functioning.
The script is called cwrmail.pl and is located in my cgi-bin.
When I... (9 Replies)
Dear Friends,
Sorry for this basic request. But I just started learning Ksh recently and still I am a newbie in this field.
Q: I have files on one server and the date format is 20121001000009_224625.in which has year (yyyy) month (mm) and date (dd). I have these files on server A. The task... (8 Replies)
Hi all,
I am not sure whether anyone of you using XIV to copy vg from one host to another. After I managed to copy all the respective vg over to destination vg, and map all vg to destination and when come to varyonvg, I got the following error
0516-510 varyonvg: Physical volume not found for... (2 Replies)
I need to connect to a ftp server-1 from linux server-2 and copy/get a file from server-1 which follows a name pattern of FILENAME* (located on the root directory) and copy on a directory on server-2. Later, I have to use this file for ETL loading... For this I tried using as below
/usr/bin/ftp... (8 Replies)
I have 3 servers A, B, C and server B is having some files in /u01/soa/ directory, these files i want to copy to server C, and i want to run the script from server A.
Script(Server A) --> Files at Server B (Source server) --> Copy the files to Server C(Target Server).
We dont have RSA key... (4 Replies)
Iam new to AIX
I am unable varyonvg on the vios,some of the disk are reported as harware failure.
I am going to replace the disk,Please tell me how to remove the disk without any corruption in the VG
lspv -l hdiskx also didn't work (0 Replies)
Discussion started by: roayaix
0 Replies
LEARN ABOUT REDHAT
slist
SLIST(1) slist SLIST(1)NAME
slist - Lists available NetWare Servers
SYNOPSIS
slist [ pattern ]
DESCRIPTION
slist lists all NetWare Servers available in your network.
If slist does not print to a tty, the decorative header line is not printed, so that you can count the servers on your network by doing
slist | wc -l
OPTIONS
pattern
pattern is used to list only servers whose names match the specified pattern. For a server to be listed, the pattern must match the full
server name. You can use wildcards for the pattern, but you must protect these wildcards from any command line expansion by quoting.
Case doesn't matter.
EXAMPLE
slist "I*"
or
slist "i*"
List all available Netware servers on your Network, that begin with an "I".
SEE ALSO ncpmount(8), ncpumount(8), pqlist(1), nprint(1)CREDITS
slist was written by Volker Lendecke (lendecke@math.uni-goettingen.de)
BUGS
slist works only in IPX environment, as it uses SAP to find first server and then Bindery to get list of servers.
slist 01/07/1996 SLIST(1)