Qlogic HBA + Veritas - Part 2 Post: 302315692

10 More Discussions You Might Find Interesting

1. Solaris

Qlogic 2300 and WWN display

hi all, I'm looking for a command to display the WWN of my 2 HBAs cards installed on my Solaris 8 server. I have installed HP securepath for multipathing but I can only see the controllers info of my SAN with spmgr display command. Any ideas ? Thanks a lot. Fabien

2. Red Hat

RHEL AS 4 Kernel SRC + DKMS + QLogic

Hi, I need some help. I installed RHEL AS 4 u5 x86_64 (vendor requirement) on a Dell Blade 1855. I have a daughter board that will give it a HBA port. I can't install the daughter card until the Qlogic driver is loaded. I can't install the Qlogic driver sine the kernel src is not there. So I...

3. Solaris

Qlogic HBA card in E450 with errors

I have installed a qlogic HBA card in an E450 Solaris 9 with all the SUNW packages and the latest EPROM version. Configuration reboot was done. An orange light flashes to the right of where the card plugs into the fiber cable after booting, and the following error apprears at the start of the boot...

4. Solaris

Qlogic HBA's - lputil / lpfc.conf

Hi all Hope your all well and happy in solaris land :-) Recently purchased some Qlogic HBA's for a few solaris servers. Was told that you cant have mixed chipsets and as this client is all qlogic, have to have hba's using qlogic. 1) Is that correct ? Cant mix different chipsets of...

5. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Hi All, I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices.. bash-2.05# luxadm -e port Found path to 0 HBA ports bash-2.05# luxadm probe No Network Array enclosures found in /dev/es...

6. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

7. Red Hat

lun masking at qlogic HBA level

need to do LUN masking at qlogic HBA level..at RHEL 5.x I am using qla* module at part of the Unix kernel, it is not OEM drivers that come with the HBA card, so I can't use Sansurfer to do this.. Is there a way to do this at all ?? :wall:

8. Solaris

Solaris OS having issue accessing LUN from Qlogic swich

Hi Community, I am facing one issue related storage accessing from solaris 10 machine(M5000). it was working fine then we shifted to another site. the only change on that site is FC switch. The issue i am facing is from solaris machine i can able to see the LUN, it;s only a test lun of 30...

9. Solaris

Qlogic 10G Ethernet adapter not working

Hi Community, i have one issue with 10 fiber ethernet adapter. here is my details: root@new-bpel.example.com #dladm show-dev bge0 link: unknown speed: 0 Mbps duplex: unknown bge1 link: up speed: 1000 Mbps duplex: full qlge2 link:...

10. UNIX for Beginners Questions & Answers

How to extend a disk in veritas volume manager in veritas cluster?

Hi Experts, I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system. #hastatus -sum -- System State Frozen A node1 running 0 A node2 running 0 -- Group State -- Group System Probed ...

LEARN ABOUT SUNOS

asadmin-start-appserv

asadmin-start-appserv(1AS)					   User Commands					asadmin-start-appserv(1AS)

NAME

       asadmin-start-appserv, start-appserv - starts thedomains in the specified or default domains directory

SYNOPSIS

       start-appserv [--domaindir install_dir/domains] [--terse=false] [--echo=false]

DESCRIPTION

       This command has been deprecated. Please use start-domain to start the domains in the specified or default domains directory. start-appserv
       starts the domains in the specified or default domains direcotry. If the domains directory is not specified, the  domains  in  the  default
       domains directory are started. The default domains directory is install_dir/domains. This command can only be run locally.

OPTIONS

       --domaindir	       directory where the domains are started. If specified, path must be accessible in the filesystem. If not specified,
			       the domains are started in the default install_dir/domains directory.

       --terse		       indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
			       formatted data for consumption by a script. Default is false.

       --echo		       setting to true will echo the command line statement on the standard output. Default is false.

EXIT STATUS

       0		       command executed successfully

       1		       error in executing the command

       asadmin-create-domain(1AS), asadmin-start-domain(1AS), asadmin-stop-domain(1AS), asadmin-delete-domain(1AS), asadmin-list-domains(1AS)

J2EE 1.4 SDK							    March 2004						asadmin-start-appserv(1AS)