To change of port name in nmap Post: 302312813

9 More Discussions You Might Find Interesting

1. Cybersecurity

Nmap

I am pretty new at running nmap ,and i have some doubt about some o/ps the nmap shows I tried to scan my own system for UDP open ports I see that if i use one UDP port say 13 It shows that its in open state , etc But if i scan for the whole UDP ports in the nmap-services . I gives te...

2. SCO

Change FTP port UnixWare

Hi there, I have a client who wants to FTP to his server (UW7.1.4). He don't wants to use the standard 21 port but a differtent port like 8210. I added an extra ftp1line in the /etc/services and /etc/inetd.conf as same as the original ftp line. Restarted TCP/IP but when I connect with an...

3. AIX

nmap on aix 5.2

I'm trying to compile nmap 4.11 on an aix 5.2 machine and get the following error when attempting the 'make' command; make "Makefile", line 1: make: 1254-055 Dependency line needs colon or double colon operator. "Makefile", line 14: make: 1254-055 Dependency line needs colon or double colon...

4. IP Networking

Unknown open port: "6881/tcp open bittorrent-tracker" found with nmap

Hi. I ran nmap on my server, and I get the following: Starting Nmap 4.76 ( http://nmap.org ) at 2009-03-19 16:33 EDT Interesting ports on -------- (-----): Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 6881/tcp open bittorrent-tracker The...

5. Solaris

How To Change 5 port Ip Address Solaris?

Hello i'm newbie in solaris, anybody know how to change five port solaris 10? exmpe: bge0, bge1, bge2, etc. anybody can help me with the script implementasi... and logical how solaris work. thank so much:b:

6. Cybersecurity

Help with NMAP

I'm seeing a persistent address showing up on my firewall router logs. The address is 10.98.115.9:67, and is broadcasting to 255.255.255.255. I know that this would typically signal a BOOTP service, such as a bootp server announcing itself on the network. But I can't isolate which machine it...

7. Shell Programming and Scripting

Need a command to change the port region

portsuf=25 port=20925 I need to replace 09 with 25 It should be like 22525. Can some please help with command or script.

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. AIX

How to change from tty03 to tty00 serial port in AIX 5.x?

Hi, We use AIX 5.x, and we have an application that use the info from a server through a serial port tty00. Some days ago, we bought a new two port serial board, and the server assign this new ports as tty02 and tty03, and leaves tty00 and tty01 as unavailable. We cant modify the program and...

LEARN ABOUT CENTOS

tcp-env

tcp-env(1)                                                    General Commands Manual                                                   tcp-env(1)

NAME

       tcp-env - set up TCP-related environment variables

SYNOPSIS

       tcp-env [ -rR ] [ -ttimeout ] program [ arg ...  ]

DESCRIPTION

       The  input  for  tcp-env  must be a TCP connection.  tcp-env finds out information about that connection, puts the information into several
       environment variables as described in tcp-environ(5), and runs program with the given arguments.

       Usually tcp-env is run from inetd.  It might instead be run from another server that already sets up the right  environment  variables;  if
       PROTO  is  set  to  TCP  when  tcp-env  is invoked, tcp-env assumes that all the other variables are set up properly, and it does not check
       whether the input is a TCP connection.

OPTIONS

       -r     (Default.)  Attempt to obtain TCPREMOTEINFO from the remote host.

       -R     Do not attempt to obtain TCPREMOTEINFO from the remote host.

       -ttimeout
              Give up on the TCPREMOTEINFO connection attempt after timeout seconds.  Default: 30.

SEE ALSO

       tcp-environ(5), inetd(8)

                                                                                                                                        tcp-env(1)