I'm trying to telnet to my alom port, as I need to drop the box & carry out some changes in single user. But the connection appears to be dead. I get this far:
and the connection just appears to hang there. I can ssh to the box ok, and there are no other users connected. Any ideas?
-edit-
i've just tried resetting the sc using the 'resetrsc' command - but no joy
Hi all,
I recently purchased a 440 MHz processor module for my Sun Ultrasparc 5 computer. I installed the module, updated the boot prom to the most recent version and when the machine starts up the initial white screen shows I have a 333 MHz processor installed !
I checked the details of the... (2 Replies)
Hello,
I wrote a script which monitor the keyswitch state repeatedly each 10 minutes.
I'm extracting the keyswitch status by using prtdiag.
The script works fine for Netra v440 , but I found that prtdiag under Netra 1290 don't give keyswitch status.
unlike Netra 440 server , I found that... (2 Replies)
Dear All
I am getting these error while I boot the Netra 440 server. Could anyone tell me what can be the problem
Regards
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Sun(tm) Advanced Lights Out Manager 1.5.4 (indcc01ma02) ... (6 Replies)
I was asked to look into a problem with a Sun Netra 440 in another department. On the server in question, the relevant 'uname -a' information is, "SunOS host1 5.9 Generic_118558-16 sun4u sparc SUNW,Netra-440". That information aside, while the other admin is logged into the ALOM, these errors are... (0 Replies)
Hi
i am accessing the server remotly. i want to replace bad dvd writer. how do i know the part number of the dvd drive for raising a spare.
thanks (3 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Hi Everyone.
What is the differece b/n ALOM and ALOM CMT Service processor.
I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports.
Not sure how different are these.
Thanks, (0 Replies)
Hi All,
I hope I'm posting this in the right forum, apologies if not.
I have a Netra 440 server which has been showing an amber maintenance light for some time now. It first appeared when I upgraded the memory modules, but the new memory is working fine. All other components seem OK and the... (10 Replies)
Hi,
How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA.
I keep try to access using ssh. Please guide me.
Thanks. (16 Replies)
Hi all,
I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server.
We checked HW comunication between Fan and the MotherBoard, and we think is a problem of... (8 Replies)
Discussion started by: proof_enrique
8 Replies
LEARN ABOUT BSD
genrbox
GENBOX(1) General Commands Manual GENBOX(1)NAME
genrbox - generate a RADIANCE description of a box
SYNOPSIS
genrbox mat name xsiz ysiz zsiz [ -i ][ -r rad | -b bev ]
DESCRIPTION
Genbox produces a RADIANCE scene description of a parallelepiped with one corner at the origin and the opposite corner at (xsiz, ysiz,
zsiz). The sides of the box will be parallel to the three coordinate planes. The surfaces that make up the box will be modified by mat
and their identifiers will begin with name. The -i option can be used to produce a box with inward directed surface normals. The -r
option can be used to specify the radius for rounded edges. The -b option can be used to specify the indentation for beveled edges.
EXAMPLE
To produce a rectangular box made of wood with beveled edges:
genrbox wood box1 5 8 3 -b .5 > box1
AUTHOR
Greg Ward
BUGS
Because spheres and cylinders are used to construct boxes with rounded edges, a transparent box of this type appears quite messy.
SEE ALSO genrev(1), gensurf(1), genworm(1), rpict(1), rvu(1), xform(1)RADIANCE 11/15/93 GENBOX(1)