04-22-2009
New HDD Installation
All,
I am a complete grasshopper when it comes to Unix, so here goes. I have a Solaris 9 server, running two 36GB HDD in a mirrored configuration. I am running low on disk space, and have purchased an additional 145GB HDD. Can anyone point me in the direction to some documentation on how to add this HDD, format, partition, etc? I want to make the whole drive one size, and then move the log files to this HDD. I have found some documentation, but it is all confusing to me as this is my first real Solaris Server experience.
Thank you, and please be gentle.
Grasshopper.
ok, so i was able to get it to be recognized, and did the following:
1. format
2. partition
3. print
4. modify (Set disk to all free hog)
5 yes - continue to create a new partition table based on the above table
6 yes - Make displayed partition table the current partition
7 named the partition table
8 labeld the disk
9 exit the utility
10 mkfs /dev/rdsk/c1t2d0S6 <--This is the Slice I used for the whole disk
11 Successfully creates File System
12 mount /dev/rdsk/c1t2d0s6
--error: no mount point defined
What am I missing?
Last edited by DukeNuke2; 04-22-2009 at 05:32 PM..
10 More Discussions You Might Find Interesting
1. Solaris
hello solaris friends,
I've tried installing Sun Solaris 10.0, but everytime it seems to bypass the network config. screen that looks similar to this...here's the url:
http://www.hup.hu/old/images/hup/Solaris/Sol10beta7/9.png
I'm able to install it all the way through but I get no... (2 Replies)
Discussion started by: cadmiumgreen
2 Replies
2. Ubuntu
Umm How can I get the Knoppix can be booted off my hard drive instead of the CD. I dont like using the CD. :confused: (4 Replies)
Discussion started by: shade11
4 Replies
3. UNIX for Dummies Questions & Answers
Hi All,
I need some advice on dual booting a dell box so that I can have WinXP and Solaris 10 OS there. The question is, what is the best way of preparing the hdd for prior to installation?
I have used created two partition, one for xp and the and the other unallocated partition for Solaris.... (3 Replies)
Discussion started by: S0laris_B0y
3 Replies
4. UNIX for Advanced & Expert Users
Hello,
I have a P4, 2.4GHz, 256MB ASROCK mainboard: I am trying to install sco 5.0.5 on an 80gb hdd IDE .
I have tried the following techniques:
1. using the updated wd btld image- no success
2. defbootstr biosgeom
3. use interactive divvy, make adjustments using dkinit/dparam during... (0 Replies)
Discussion started by: pude
0 Replies
5. UNIX for Dummies Questions & Answers
i read the reply at this link
https://www.unix.com/unix-dummies-que...d-backups.html
and i really surprised and i want to know if it must the mirrored HDD be on the secondary SCSI port and the operated HDD on Primary SCSI port?
thanks (3 Replies)
Discussion started by: hatemeid
3 Replies
6. HP-UX
Hello
How to access to a second hard disk on a HP-UX system?
Thanks (3 Replies)
Discussion started by: ouniss
3 Replies
7. UNIX for Dummies Questions & Answers
Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D
I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4.
The current HDD is an IBM DGHS COMP IEC -950
FRU PN#... (5 Replies)
Discussion started by: Chevy89rocks
5 Replies
8. Solaris
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Discussion started by: hemalsid
9 Replies
9. Solaris
Dear All,
I have been trying to move my existing Solaris Installation (x86, 10/08) to a bigger HDD.
So I created a 22 cylinder boot partition and used the rest of the space for a Solaris2 partition. Then I created slices same size like on my current disk.
I copied all files with cpio and... (3 Replies)
Discussion started by: BigT79
3 Replies
10. AIX
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies
LEARN ABOUT DEBIAN
scrounge-ntfs
scrounge-ntfs(8) BSD System Manager's Manual scrounge-ntfs(8)
NAME
scrounge-ntfs -- helps retrieve data from corrupted NTFS partitions
SYNOPSIS
scrounge-ntfs -l disk
scrounge-ntfs -s disk
scrounge-ntfs [-m mftoffset] [-c clustersize] [-o outdir] disk start end
DESCRIPTION
scrounge-ntfs is a utility that can rescue data from corrupted NTFS partitions. It writes the files retrieved to another working file system.
Certain information about the partition needs to be known in advance.
The -l mode is meant to be run in advance of the data corruption, with the output stored away in a file. This allows scrounge-ntfs to recover
data reliably. See the 'NOTES' section below for recover info when this isn't the case.
OPTIONS
The options are as follows:
-c The cluster size (in sectors). When not specified a default of 8 is used.
-l List partition information for a drive. This will only work when the partition table for the given drive is intact.
-m When recovering data this specifies the location of the MFT from the beginning of the partition (in sectors). If not specified
then no directory information can be used, that is, all rescued files will be written to the same directory.
-o Directory to put rescued files in. If not specified then files will be placed in the current directory.
-s Search disk for partition information. (Not implemented yet).
disk The raw device used to access the disk which contains the NTFS partition to rescue files from. eg: '/dev/hdc'
start The beginning of the NTFS partition (in sectors).
end The end of the NTFS partition (in sectors)
NOTES
If you plan on using this program sucessfully you should prepare in advance by storing a copy of the partition information. Use the -l option
to do this. Eventually searching for disk partition information will be implemented, which will solve this problem.
When only one partition exists on a disk or you want to rescue the first partition there are ways to guess at the sector sizes and MFT loca-
tion. See the scrounge-ntfs web page for more info:
http://memberwebs.com/swalter/software/scrounge/
AUTHOR
Stef Walter <stef@memberwebs.com>
scrounge-ntfs June 1, 2019 scrounge-ntfs