04-12-2009
It does help. Thanks a lot!
There is no serial port on my laptop, only USB ports. I saw some USB-to-DB9 cables in eBay and was wondering why such "simple" cables need drivers. Your answer clarifies that the driver is used to create a new serial port under Windows.
May I assume that a USB-to-RJ45 cable does the same job as the USB-to-DB9 cable? On the IBM P640, there is a RJ45 port functioning as serial port. It also has some DB9 serial ports. On some Sun servers such as Sunfire v100, there is no serial port in DB9 form, only serial port in RJ45 form. Therefore, a USB-to-RJ45 cable may be a better choice (than USB-to-DB9) if it is working. Am I right here?
Quote:
Originally Posted by
Cesar Delgado
Hi
If your laptop has a DB9 serial port you just need a serial cable similar to those ones used to admin Cisco devices and a Hyperterminal connection.
If your laptop has USB ports you can use one of those USB-to-DB9 converters to connect to the serial port of the pSeries server. They usually comes with a driver so Windows creates a new serial port and using Hyperterminal you cna connect.
Hope this helps
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi,
I have been using a computer to keep track of inventory for my business. I am pretty sure it runs on Unix. In the back of the computer there is some sort of PCI card that has about 8 RJ-11 ports on it. I use that card to connect the Unix system to my 3 VT-220 terminals. I use a simple 6... (1 Reply)
Discussion started by: john202
1 Replies
2. UNIX for Dummies Questions & Answers
Hi,
I have PC with Linux OS RHEL3 and USB port is disabled from BIOS. BIOS access is protected using password. But, I have root access. Now, how can I enable USB port using root access? Is there any trick that I can do using root access that can enable USB port once my PC has booted up? (3 Replies)
Discussion started by: gydave
3 Replies
3. IP Networking
i have wireless usb adapter rtl8187 from micromax company
my proplem is the signal is very weak and i cannot open website
can i increase the signal ?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0... (5 Replies)
Discussion started by: rsd220
5 Replies
4. UNIX for Advanced & Expert Users
I want to watch the USB ports.
If any device is connected to the USB port I want to take the name of the device and
I want to log the device name. how to watch all the USB ports.
How to find the device is connected in which usb port. (1 Reply)
Discussion started by: ungalnanban
1 Replies
5. AIX
Hello,
I have an old Pseries P520 9111-520 and it doesn't have the PCI graphics - video - display card in it.
On the back side of it, I can see two serial ports.
What is the easiest way to put console display for this system ?
Would a serial cable ( null modem cable ) from Pseries to... (5 Replies)
Discussion started by: filosophizer
5 Replies
6. UNIX for Dummies Questions & Answers
Hello All,
So I have been running into an issue with a USB Modem where if someone ends their dialin connection abruptly from the other side the modem gets stuck
and I found that the only way to fix it is to either unplug the USB Modem and plug it back in, or just reboot. I'd rather not reboot... (5 Replies)
Discussion started by: mrm5102
5 Replies
7. UNIX for Dummies Questions & Answers
Hi all
unixware 7.1.3 I'm afraid ! I connected a usb tape drive and it was automatically recognised in the device list (sdiconfig -l) and created devices in /dev/rmt (ctape1 etc.). I could successfully read and write to the device.
Then unplugged the usb cable and plugged it back in again... (0 Replies)
Discussion started by: deel
0 Replies
8. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
9. Shell Programming and Scripting
Hi everybody! :)
I am a complete newbie. :D Is it possible to write a script (shell or python) to listen to usb port event and to notify me every time an usb storage key is plugged or ejected? I want it to echo the device to mount (eg. /dev/sdb).
I wrote an udev rule wich runs a script after... (1 Reply)
Discussion started by: manuhexadec
1 Replies
10. Linux
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies
UFTDI(4) BSD Kernel Interfaces Manual UFTDI(4)
NAME
uftdi -- USB support for serial adapters based on the FT8U100AX and FT8U232AM
SYNOPSIS
uftdi* at uhub?
ucom* at uftdi?
DESCRIPTION
The uftdi driver provides support for various serial adapters based on the FTDI USB UART IC family. Supported chip models are FT8U100AX,
FT8U232AM, FT232BM, FT232R, dual channel FT2232D, dual channel FT2232H, and quad channel FT4232H.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The uftdi driver supports the following adapters:
B&B Electronics uLinks RS-422/485
Coastal ChipWorks TNC-X
Crystalfontz CFA-631 LCD
Crystalfontz CFA-632 LCD
Crystalfontz CFA-633 LCD
Crystalfontz CFA-634 LCD
Crystalfontz CFA-635 LCD
CTI USB-485-Mini and and USB-Nano-485
Falcom Samba 55/56 GSM/GPRS modem
Falcom Twist GSM/GPRS modem
Future Technology Devices DB9
Future Technology Devices IC
Future Technology Devices KW
Future Technology Devices RS232
Future Technology Devices Y6
Future Technology Devices Y8
Future Technology Devices Y9
Future Technology Devices YS
GlobalScale Technogogies SheevaPlug and OpenRD
HP USB-Serial adapter shipped with some HP laptops
Inland UAS111
Interpid Control Systems NeoVI Blue
Interpid Control Systems ValueCAN
Matrix Orbital LK/VK/PK202-24 LCD
Matrix Orbital LK/VK204-24 LCD
Matrix Orbital MX2/MX3/MX6 Series
Matrix Orbital MX4/MX5 Series LCD
QVS USC-1000
RATOC Systems REX-USB60F
Robot Electronics USB to I2C Communications Module
Sealevel Systems USB-Serial adapter
SIIG US2308 Serial
Telldus Tellstick and Tellstick Duo
VScom USB-COM Mini
SEE ALSO
tty(4), ucom(4), usb(4)
HISTORY
The uftdi driver appeared in NetBSD 1.5.
BSD
October 18, 2012 BSD