I have been looking in the scripts for interface management, in an effort to kick off a script of my own on any "significant network event" (I will qualify that in a bit)
I managed to add a check to tell netplugd to run my script every time there is a hot-plug event. Now I need to make it so my... (0 Replies)
hi there
the ethernet wire was out of the pc when the system started.
#ifconfig
#ifconfig -a
i did not get any ip for eth0.
i plug the cable into the pc
#ifdown eth0
#ifup eth0
now the ip address is assigned to eth0
Question is : IS this right way to bring ethernet down... (2 Replies)
I've been finding myself using a log file colorizer written in perl to reformat and colorize the output from many different programs. Mainly, however, I use it to make the output from "tail -f" commands more readable.
The base perl script I use is based on "colorlogs.pl" available from the... (1 Reply)
How can view log messages between two time frame from /var/log/message or any type of log files.
when logfiles are very big and especially many messages with in few minutes, I would like to display log messages between 5 minute interval.
Could you pls give me the command? (1 Reply)
AM in need of some plugin/script that can monitor HP-UX file "/var/opt/resmon/log/event.log" .
Have written a scrip in sh shell that is working fine for syslog.log and mail.log as having standard format, have interrogated that to Nagios and is working as I required .
But same script failed to... (3 Replies)
is there a way to efficiently monitor logfiles that do not have a date or time format? i have several logs on several different servers that need to be monitored. but i realized writing a script for this would be very complex and time consuming giving the variety of things i need to check for i.e.... (2 Replies)
I've got an issue with a VMWare server running RHEL 6.3 that has dual E1000 NICs. I have configured the cards as I would normally do in /etc/sysconfig/network-scripts as ifcfg-eth0 and ifcfg-eth1. I can execute ifup eth0 and bring the interface up quite happily, however when I execute ifup eth1 it... (2 Replies)
How to check log size every 10min. by script (can use crontab)
if log size not change with alert "Log not update"
Base run on SunOS 5.8 Generic_Virtual sun4u sparc SUNW,SPARC-Enterprise
logFiles="log1.log log2.log"
logLocation="/usr/home/test/log/"
Out put.
Tue Jan 31... (3 Replies)
Hi ,
We have around 22 logs , each has different entries. I have to automate this using shell script. The ideas which am sharing is given below
1) We use only TAIL -100 <location and name of the log> Command to check the logs.
2) We want to check whether the log was updated before 24... (13 Replies)
Below is my script to log all the command input by any user to /var/log/messages. But I cant achieve the desired output that i want. PLease see below.
function log2syslog
{
declare COMMAND
COMMAND=$(fc -ln -0)
logger -p local1.notice -t bash -i -- "$USER:$COMMAND"
}
trap... (12 Replies)
Discussion started by: invinzin21
12 Replies
LEARN ABOUT DEBIAN
ifscheme-mapping
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)