03-30-2009
No, you (in general) need to only configure IP routing in the computers, not the switches.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have the primary set up, but cannot get the secondary box to answer a query. Here is the message I get:
> nslookup dfwnet1 10.26.38.41
*** Can't find server name for address 10.26.38.41: Non-existent host/domain
*** Default servers are not available
10.26.38.41 is the IP of the secondary... (3 Replies)
Discussion started by: 98_1LE
3 Replies
2. IP Networking
i have one private network with one ip address, and i have a seperate network on a seperate ip address.
now, each network is behind a firewall/router. now what i want to do is be able to access one server on the second network from a computer on the first., but with the private ip address, (this... (2 Replies)
Discussion started by: norsk hedensk
2 Replies
3. Solaris
I just added a new disk i suppose the disk is not supported by sun solaris pls can someone advice on what i can do.
pls see below:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 15934 alt 2 hd 255 sec 126>
... (6 Replies)
Discussion started by: seyiisq
6 Replies
4. UNIX for Advanced & Expert Users
This is one our office BOX
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
Kisses% rlogin pebblz01 -l adminID
Password:
Last login: Sat Feb 14 01:11:36 from Kisses
Please enter your own login id and password.
Your login: I_rule
Your password:xxxxx
From the above... (3 Replies)
Discussion started by: dashok.83
3 Replies
5. UNIX for Dummies Questions & Answers
how would i sort a file on the fourth field as the primary sort and the third field as a secondary sort? (1 Reply)
Discussion started by: trob
1 Replies
6. Solaris
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies
7. UNIX for Dummies Questions & Answers
hi guys
I am doing some testing for DNS
I got a master DNS(192.168.2.10) and I setup a slave DNS(192.168.2.11) but when I shutdown the Master DNS my linux client cannot resolve using the slave
any idea way?
This is the named.conf
options
{
query-source port 53;
directory... (9 Replies)
Discussion started by: kopper
9 Replies
8. HP-UX
Hi
In Linux I set Secondary Logging in the way below.
1. We perform this by adding below lines into
/root/.bashrcfile :
# secondary logging beginexport HISTSIZE=600000export HISTFILESIZE=600000export HISTTIMEFORMAT="%F %T %z "export HISTFILE=/root/.bashhist/root_history-$(who am i | awk... (4 Replies)
Discussion started by: presul
4 Replies
9. Red Hat
Hi,
I would like to know how to find our secondary group of user only.
I have used the command id -Gn user1
it is showing both groups of user.
Primary and secondary group. (2 Replies)
Discussion started by: manoj.solaris
2 Replies
10. Solaris
hi there,
i using salaris 10 as my DNS server.
i have 2 dns server primary and secondary. if primary dns server i edit/update, the other secondary dns server must be sync too.
How can i configure if dns server (primary) can sync the secondary? (1 Reply)
Discussion started by: tappetmus
1 Replies
LEARN ABOUT OSF1
ip6_setup
ip6_setup(8) System Manager's Manual ip6_setup(8)
NAME
ip6_setup - IPv6 configuration program
SYNOPSIS
/usr/sbin/ip6_setup
DESCRIPTION
The ip6_setup utility allows you to configure the IPv6 networking software on your system.
To run ip6_setup, enter the following command and then answer the questions: # ip6_setup
You must know your Internet Protocol Version 6 (IPv6) address. If your network uses subnet routing, you must know the subnet mask for your
network. The network manager should be able to provide you with the information that you need.
After the ip6_setup command completes, the network services on the system can be restarted manually with the following command: #
/usr/sbin/rcinet restart
Before you restart the network services with the preceding command, warn the users that the network services on the system are being
removed. File systems that were not mounted using the /etc/fstab file or the automount command must be unmounted with the unmount command.
You must remount these file systems using the mount command after the network is started on your system.
Alternatively, you can reboot the system with the following command: # /usr/sbin/shutdown -r now
FILES
Specifies the host name file. Specifies the environment variables that define the network configuration on your system. Specifies the
trusted hosts file. Specifies the network name file. Specifies Internet routing information. Specifies Internet routing information.
SEE ALSO
Commands: mount(8), rcinet(8)
Files: gateways(4), hosts(4), hosts.equiv(4), networks(4), routes(4).
Network Administration
ip6_setup(8)