03-30-2009
secondary and private IP connection
hosta(eth0)----|switch|---(eth0)hostb
say hosta and hostb both connect to a swtich using eth0 with public IP addresses, and I add secondary and private IP on hosta and hostb's same eth0 interfaces.
So in order for them to reach each other, do I need to config the switch?
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have the primary set up, but cannot get the secondary box to answer a query. Here is the message I get:
> nslookup dfwnet1 10.26.38.41
*** Can't find server name for address 10.26.38.41: Non-existent host/domain
*** Default servers are not available
10.26.38.41 is the IP of the secondary... (3 Replies)
Discussion started by: 98_1LE
3 Replies
2. IP Networking
i have one private network with one ip address, and i have a seperate network on a seperate ip address.
now, each network is behind a firewall/router. now what i want to do is be able to access one server on the second network from a computer on the first., but with the private ip address, (this... (2 Replies)
Discussion started by: norsk hedensk
2 Replies
3. Solaris
I just added a new disk i suppose the disk is not supported by sun solaris pls can someone advice on what i can do.
pls see below:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 15934 alt 2 hd 255 sec 126>
... (6 Replies)
Discussion started by: seyiisq
6 Replies
4. UNIX for Advanced & Expert Users
This is one our office BOX
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
Kisses% rlogin pebblz01 -l adminID
Password:
Last login: Sat Feb 14 01:11:36 from Kisses
Please enter your own login id and password.
Your login: I_rule
Your password:xxxxx
From the above... (3 Replies)
Discussion started by: dashok.83
3 Replies
5. UNIX for Dummies Questions & Answers
how would i sort a file on the fourth field as the primary sort and the third field as a secondary sort? (1 Reply)
Discussion started by: trob
1 Replies
6. Solaris
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies
7. UNIX for Dummies Questions & Answers
hi guys
I am doing some testing for DNS
I got a master DNS(192.168.2.10) and I setup a slave DNS(192.168.2.11) but when I shutdown the Master DNS my linux client cannot resolve using the slave
any idea way?
This is the named.conf
options
{
query-source port 53;
directory... (9 Replies)
Discussion started by: kopper
9 Replies
8. HP-UX
Hi
In Linux I set Secondary Logging in the way below.
1. We perform this by adding below lines into
/root/.bashrcfile :
# secondary logging beginexport HISTSIZE=600000export HISTFILESIZE=600000export HISTTIMEFORMAT="%F %T %z "export HISTFILE=/root/.bashhist/root_history-$(who am i | awk... (4 Replies)
Discussion started by: presul
4 Replies
9. Red Hat
Hi,
I would like to know how to find our secondary group of user only.
I have used the command id -Gn user1
it is showing both groups of user.
Primary and secondary group. (2 Replies)
Discussion started by: manoj.solaris
2 Replies
10. Solaris
hi there,
i using salaris 10 as my DNS server.
i have 2 dns server primary and secondary. if primary dns server i edit/update, the other secondary dns server must be sync too.
How can i configure if dns server (primary) can sync the secondary? (1 Reply)
Discussion started by: tappetmus
1 Replies
LEARN ABOUT DEBIAN
ifscheme
IFSCHEME(8) Commands IFSCHEME(8)
NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS
-v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO
interfaces(5) ifup(8) ifdown(8)
DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)