i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay.
i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card? (7 Replies)
Hi Friends,
I am using intel system installed solaris 10, when i check ifconfig -a it doesn't show any thing eg-for HP servers hme0, for sun servers-iprb0. for me it doesn't show any thing, and tell me what files to be modified. Thanks in Advance. (1 Reply)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Good morning,
Saw this on a system this morning, thought I'd check with this group before calling IBM.
Basically what we have here is a P7 running 6.1 reporting the following in errpt:
LABEL: GOENT_LINK_DOWN
IDENTIFIER: EC0BCCD4
This is for ent4, which is odd because we... (0 Replies)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
hi I juts want to know if there is a command that checks if an ethernet port corresponds to a network card.
ex. I have 3 network cards, one is two ports, and the other two 8 ports.
How do I know that eth0 corresponds to the the two-port network card and eth9 corresponds to the first 8-port... (2 Replies)
Hi,
I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0
Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of.
Anyone... (9 Replies)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT NETBSD
smsh
SMSH(4) BSD Kernel Interfaces Manual SMSH(4)NAME
smsh -- SMSC LAN9118/LAN9218 Family Ethernet interfaces device driver
SYNOPSIS
smsh0 at gxio? port 0x40000300 gpirq 99
DESCRIPTION
The smsh device driver supports SMSC LAN9118 and LAN9218 Family Ethernet interfaces.
The ISA attachment of the smsh driver supports any LAN9118 Family Ethernet interface on the ISA bus, the on-board LAN9118 Family Ethernet
found in many embedded PCs. However, no ISA attachment has been written yet.
LAN9218 Family supports also HP Auto-MDIX.
MEDIA SELECTION
Media selection done using ifconfig(8) using the standard ifmedia(4) mechanism. Refer to those manual pages for more information.
SEE ALSO ifmedia(4), intro(4), isa(4), mii(4), ifconfig(8)HISTORY
The smsh driver first appeared in NetBSD 6.0.
AUTHORS
The smsh driver was written by KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>.
BUGS
No ISA attachment yet.
BSD December 2, 2009 BSD