Greetings,
Im not sure about 9.02 (is this a series 800 server?), but I had it on my 900/715 station (but thas isvery long ago...) in 9.05 or 9.07 I remember it was in SYS-ADMIN fileset if <ou have them...
From my notes:
(No space allowed between option flag and args)
rcdev : name of the devicefile on which recovery system is created
No compression allowed
with DDS drive : explicitly specify device file
rootdev can be:
/dev/dsk/0s0
/dev/root
/dev/hd
series : normally 700
so for /dev/dsk/6s0 on DDS:
you could also use dd to backup your hard disk to another or to a DDS drive
could any one help me
I have a HP UX 11.0 with a lot of VG and disks connected to SAN. I need to create a Golden Image having only the vg00 of this system. How do i do this using make_sys_image?
In case any have some docs, I would appreciate if You could share it.
Thanks
Dhanish (5 Replies)
Sorry if this has been asked and answered, but I can't find this particual problem. I've had an Ignite server running for years on a small internal network with images we load on daily basis. Tried to load two servers, L2000 and C3600 , both with same problem.
# boot lan.192.168.2.2 install
... (0 Replies)
Hello All,
I need to bring down our old 9000 series d350, but my supervisor wants an ignite backup created. I cannot find ignite in the usual places (/opt/ignite) nor can I find it in swlist. As far as I can tell the cd's are long gone.
Is there anywhere else I could look for ignite being... (6 Replies)
I've read the Ignite User/Admin Guide but I'm having trouble figuring out if I can do a make_net_recovery if the ignite server and client server are on completely different networks? If this can be done is there any special configuration? If I initiate the command from the server it looks like it... (3 Replies)
Works all.
Depot shared via nfs
dhcp working
setting file system,network,root password,etc
But when i start "go!" with installation,give me
this error.
How to fix,debug?
Thanks
http://s24.postimg.org/5hzbgk551/unixbell3.png (3 Replies)
Hi
Does anybody know how to get hold of a very old (A.3.7.n) copy of the ignite software depot for HP-UX 10.20? (7 Replies)
Discussion started by: gregsih
7 Replies
LEARN ABOUT DEBIAN
backup_delhost
BACKUP_DELHOST(8) AFS Command Reference BACKUP_DELHOST(8)NAME
backup_delhost - Deletes a Tape Coordinator entry from the Backup Database
SYNOPSIS
backup delhost -tapehost <tape machine name>
[-portoffset <TC port offset>] [-localauth]
[-cell <cell name>] [-help]
backup delh -t <tape machine name>
[-p <TC port offset>]
[-l] [-c <cell name>] [-h]
DESCRIPTION
The backup delhost command deletes the indicated Tape Coordinator entry from the Backup Database. It is then impossible to submit backup
operations to that Tape Coordinator, even if it is still running. To keep configuration information consistent, also remove the
corresponding entry from the /var/lib/openafs/backup/tapeconfig file on the Tape Coordinator machine.
To list the Tape Coordinator machines and port offsets defined in the Backup Database, issue the backup listhosts command.
OPTIONS -tapehost <tape machine name>
Specifies the hostname of the machine housing the Tape Coordinator to delete.
-portoffset <TC port offset>
Specifies the port offset number of the Tape Coordinator to delete. If omitted, it defaults to 0. If provided, it is an integer
between 0 (zero) and 58510, and must match the port offset number assigned to the same combination of Tape Coordinator and tape device
or file in the /var/lib/openafs/backup/tapeconfig file on the Tape Coordinator machine indicated by the -tapehost argument.
-localauth
Constructs a server ticket using a key from the local /etc/openafs/server/KeyFile file. The backup command interpreter presents it to
the Backup Server, Volume Server and VL Server during mutual authentication. Do not combine this flag with the -cell argument. For more
details, see backup(8).
-cell <cell name>
Names the cell in which to run the command. Do not combine this argument with the -localauth flag. For more details, see backup(8).
-help
Prints the online help for this command. All other valid options are ignored.
EXAMPLES
The following command deletes the Backup Database entry for the Tape Coordinator with port offset 2 on the Tape Coordinator machine
"backup3.abc.com":
% backup delhost -tapehost backup3.abc.com -portoffset 2
PRIVILEGE REQUIRED
The issuer must be listed in the /etc/openafs/server/UserList file on every machine where the Backup Server is running, or must be logged
onto a server machine as the local superuser "root" if the -localauth flag is included.
SEE ALSO backup(8), backup_addhost(8), backup_listhosts(8)COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas
Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
OpenAFS 2012-03-26 BACKUP_DELHOST(8)