03-15-2009
Hardware error in Netra 440 server
Dear All
I am getting these error while I boot the Netra 440 server. Could anyone tell me what can be the problem
Regards
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Sun(tm) Advanced Lights Out Manager 1.5.4 (indcc01ma02)
Please login: admin
Please Enter password: *****
sc> console -
Error: Invalid command option
Usage: console [-f]
sc>
Invalid command. Type 'help' for list of commands.
sc> console -f
Warning: User <admin> currently has write permission to this console and forcibl
y removing them will terminate any current write actions and all work will be lo
st. Would you like to continue? [y/n]y
Enter #. to return to ALOM.
Could not read diag-switch? from NVRAM!
Could not read diag-level from NVRAM!
Could not read diag-script from NVRAM!
ERROR: Could not read aft pins!
Could not read security-mode from NVRAM!
Could not read service-mode? from NVRAM!
Could not read diag-trigger from NVRAM!
Could not read verbosity from NVRAM!
ERROR: Could not read keyswitch!
@(#)OBP 4.18.10 2006/03/03 13:57 Sun Fire V440,Netra 440
Clearing TLBs
Power-On Reset
Executing Power On Self Test
0>
0>@(#) Sun Fire[TM] V440,Netra[TM] 440 POST 4.18.10 2006/03/03 14:17
/export/delivery/delivery/4.18/4.18.10/post4.18.0/Fiesta/chalupa/integrat
ed (root)
0>Copyright © 2006 Sun Microsystems, Inc. All rights reserved
SUN PROPRIETARY/CONFIDENTIAL.
Use is subject to license terms.
0>Hard Powerup RST thru SW
0>OBP->POST Call with %o0=00001000.01ff2000.
0>Diag level set to MIN.
0>Verbosity level set to MAX.
0>I/O port set to TTYA.
0>Start Selftest.....
0>CPUs present in system: 0 1 2 3
0>Test CPU(s).....
0>Init SB
0>Initialize I2C Controller
0>
0>INFO: INFO: FIRE-I Version < 1.0. Cannot Run Diags
0>
0>ERROR: TEST = Initialize I2C Controller
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG =
ERROR:3 AFSR Error 00204000.00000000, AFAR 00000000.0000e950.
0>END_ERROR
0>Decode of afsr bits 00204000.00000000
0> ME Bit: Multiple errors of same type occured.
0> UMS Bit: Error due to unsupported store
0>
0>
0>ERROR: TEST = Initialize I2C Controller
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = Fatal CPU error on master, rolling over to new master.
0>END_ERROR
1>Soft Power-on RST thru SW
1>OBP->POST Call with %o0=00001000.01ff2000.
1>Diag level set to MIN.
1>Verbosity level set to MAX.
1>I/O port set to TTYA.
1>Start Selftest.....
1>CPUs present in system: 1 2 3
1>Test CPU(s).....
1>Init SB
1>Initialize I2C Controller
1>
1>INFO: INFO: FIRE-I Version < 1.0. Cannot Run Diags
1>Init CPU
1>DMMU
1>DMMU TLB DATA RAM Access
1>DMMU TLB TAGS Access
1>IMMU Registers Access
1>IMMU TLB DATA RAM Access
1>IMMU TLB TAGS Access
1>Init mmu regs
10 More Discussions You Might Find Interesting
1. Solaris
Hi, I'm trying to get cpu fru information for a Netra CP3060 machine. I used prtdiag to get some info. prtconf does not help much for cpu's all it says is something like this:cpu (driver not attached).
I need to find out the manufacture date,location, sun part no, etc. I used prtfru -c on an N-440... (1 Reply)
Discussion started by: mk2339
1 Replies
2. Solaris
I have one Sun Netra T2000 Server. The ALOM SC admin password of this server is not known. Could you anyone help and tell me how can i reset the SC admin account password??
Thanks in advance.. (2 Replies)
Discussion started by: sudhir_shet
2 Replies
3. What is on Your Mind?
guys - not sure where to post this one but i figured this was the likely spot.
i need a sun dvd slimline for netra t1. hcl matrix has this for production/manufac. number: X7288A / 540-5014.
anyone have a good spot to get this stuff? does anyone have an extra laying around to sell? i hate going... (2 Replies)
Discussion started by: pupp
2 Replies
4. Solaris
Hello Everybody
I want to that can we configure hardware domain on netra 1280 server as I could not able to find any document regarding this server. If yes could anyone send me link regarding this.
I could not able find any proper document related to LOM. Could any provide me the link... (1 Reply)
Discussion started by: amity
1 Replies
5. Solaris
Hello,
I wrote a script which monitor the keyswitch state repeatedly each 10 minutes.
I'm extracting the keyswitch status by using prtdiag.
The script works fine for Netra v440 , but I found that prtdiag under Netra 1290 don't give keyswitch status.
unlike Netra 440 server , I found that... (2 Replies)
Discussion started by: Alalush
2 Replies
6. Solaris
Hi All,
I'm trying to telnet to my alom port, as I need to drop the box & carry out some changes in single user. But the connection appears to be dead. I get this far:
Connected to server1-co
Escape character is '^]'.
and the connection just appears to hang there. I can ssh to the box... (1 Reply)
Discussion started by: badoshi
1 Replies
7. Solaris
In my Solaris 10 - Netra CP3060, the following particular script is not running:
lrc:/etc/rc2_d/S00set-tmp-permissions
lrc:/etc/rc2_d/S07set-tmp-permissions
Above script is to set the default permission of /tmp & /var/tmp while rebooting if it found any inconsistencies. I changed the file... (4 Replies)
Discussion started by: ramnagaraj
4 Replies
8. Solaris
I was asked to look into a problem with a Sun Netra 440 in another department. On the server in question, the relevant 'uname -a' information is, "SunOS host1 5.9 Generic_118558-16 sun4u sparc SUNW,Netra-440". That information aside, while the other admin is logged into the ALOM, these errors are... (0 Replies)
Discussion started by: Borealis
0 Replies
9. Solaris
Hi
i am accessing the server remotly. i want to replace bad dvd writer. how do i know the part number of the dvd drive for raising a spare.
thanks (3 Replies)
Discussion started by: sunnybee
3 Replies
10. Solaris
Hi All,
I hope I'm posting this in the right forum, apologies if not.
I have a Netra 440 server which has been showing an amber maintenance light for some time now. It first appeared when I upgraded the memory modules, but the new memory is working fine. All other components seem OK and the... (10 Replies)
Discussion started by: DouggieC
10 Replies