What exactly are the connectivity issues you are having?
What are the outputs for the following commands?
I can say for sure that your configuration is not a good one for performance, but you have not given enough information to say just how bad it might be.
hi ,
i am trying to configure LaCie Big Disk on solaris 9 running on a 280R server .
i am trying to use the USB prot to connect to the external disk .
please i need help on this as i have no clue on how and from where to start .
thanks for ur help .
cheers (0 Replies)
Hi all..
Does anyone know have an example of passing the contents of a bash array to oracle?
basically I am looking to loop through the contents of a file(not csv!) and store each line into a bash array. Once i have this I can then pass the array into an oracle procedure that accepts an array... (1 Reply)
So I have 2 solaris sun servers one with a disk array with 14 drives which I need to move to the other server. How do I move the disk array configured as a Raid 5 to another server without losing data? So far I know I'll connect the drive, run devfsadm, use format to verify the server see's... (5 Replies)
In Sun manuals, I didn't find how to backup Sun StorageTek Common Array Manager's configuration. Is there a way to do it like backing up Brocade switch configuration? CAM is under Solaris 10.
Thank you in advance! (0 Replies)
HI:
I have a DUAL redundant system running in HP-UX 10.20 ( 2 servers)
Both servers share an external SCSI disk array. Both server runs a Data base wich uses the disk array to write the data, and that is the way they share the information.
The way that the servers see the disk array, is like... (1 Reply)
Hey guys I am new at Solaris 10, and I'm having a open error on
/dev/dsk/c1t1d0s6, when booting.
We have a Sunfire v240 running Solaris 10, which is connected to a Storedge 3320, via SCSI.
Any help, is appreciated (14 Replies)
Hi,
Is it possible to pass oracle connection information from a configuration file and use that to connect to oracle database in my unix shell scripts. Following is the scenario:
(1) I would like to save oracle connection string details in a configuration file (ex., dbconfig.txt)
(2) from my... (6 Replies)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
OSLevel: 5300-10-02-0943
System Model: IBM,8203-E4A
Power 6
==
Hi!
I replaced a failed pdisk in the raid enclosure as follows,
- rmdev -l 'pdisk18' '-d'
- Replaced it.
- cfgmgr (detected)
- I can see the new drive, with the correct serial #
lscfg -v -l pdisk18
pdisk18... (2 Replies)
Discussion started by: estrar
2 Replies
LEARN ABOUT DEBIAN
mkdevalloc
mkdevalloc(1M) System Administration Commands mkdevalloc(1M)NAME
mkdevalloc - Make device_allocate entries
SYNOPSIS
/usr/sbin/mkdevalloc
DESCRIPTION
The mkdevalloc command writes to standard out a set of device_allocate(4) entries describing the system's frame buffer, audio and removable
media devices.
The mkdevalloc command is used by the init.d(4) scripts to create or update the /etc/security/device_allocate file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevalloc command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/sr*, /dev/nsr*, /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
All entries set the device-minimum and device-maximum fields to the hex representations of ADMIN_LOW and ADMIN_HIGH, respectively. The
device-authorization field is set to solaris.device.allocate, except for the framebuffer entry, where it is set to *. The device-name,
device-type and device-clean fields are set to the following values:
device-name device-type device-clean
audio audio audio audio_clean_wrapper
tape mag_tape_0,1,... st st_clean
floppy floppy_0,1,... fd disk_clean
removable disk cdrom_0,1,... sr disk_clean
frame buffer framebuffer fb /bin/true
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO allocate(1), bsmconv(1M), attributes(5)NOTES
mkdevalloc might not be supported in a future release of the Solaris operating system.
SunOS 5.10 8 Oct 2003 mkdevalloc(1M)