What exactly are the connectivity issues you are having?
What are the outputs for the following commands?
Code:
sccli show-lun
sccli show-channel
show logical-drive
show partition
I can say for sure that your configuration is not a good one for performance, but you have not given enough information to say just how bad it might be.
hi ,
i am trying to configure LaCie Big Disk on solaris 9 running on a 280R server .
i am trying to use the USB prot to connect to the external disk .
please i need help on this as i have no clue on how and from where to start .
thanks for ur help .
cheers (0 Replies)
Hi all..
Does anyone know have an example of passing the contents of a bash array to oracle?
basically I am looking to loop through the contents of a file(not csv!) and store each line into a bash array. Once i have this I can then pass the array into an oracle procedure that accepts an array... (1 Reply)
So I have 2 solaris sun servers one with a disk array with 14 drives which I need to move to the other server. How do I move the disk array configured as a Raid 5 to another server without losing data? So far I know I'll connect the drive, run devfsadm, use format to verify the server see's... (5 Replies)
In Sun manuals, I didn't find how to backup Sun StorageTek Common Array Manager's configuration. Is there a way to do it like backing up Brocade switch configuration? CAM is under Solaris 10.
Thank you in advance! (0 Replies)
HI:
I have a DUAL redundant system running in HP-UX 10.20 ( 2 servers)
Both servers share an external SCSI disk array. Both server runs a Data base wich uses the disk array to write the data, and that is the way they share the information.
The way that the servers see the disk array, is like... (1 Reply)
Hey guys I am new at Solaris 10, and I'm having a open error on
/dev/dsk/c1t1d0s6, when booting.
We have a Sunfire v240 running Solaris 10, which is connected to a Storedge 3320, via SCSI.
Any help, is appreciated (14 Replies)
Hi,
Is it possible to pass oracle connection information from a configuration file and use that to connect to oracle database in my unix shell scripts. Following is the scenario:
(1) I would like to save oracle connection string details in a configuration file (ex., dbconfig.txt)
(2) from my... (6 Replies)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
OSLevel: 5300-10-02-0943
System Model: IBM,8203-E4A
Power 6
==
Hi!
I replaced a failed pdisk in the raid enclosure as follows,
- rmdev -l 'pdisk18' '-d'
- Replaced it.
- cfgmgr (detected)
- I can see the new drive, with the correct serial #
lscfg -v -l pdisk18
pdisk18... (2 Replies)
Discussion started by: estrar
2 Replies
LEARN ABOUT HPUX
rpccp_help
help(1m)help(1m)NAME
help - Displays a list of commands or the options of a specified command
SYNOPSIS
rpccp help [rpccp-command]
ARGUMENTS
Specifies one of the following control commands:
DESCRIPTION
The help command displays information about the RPCCP command set or the options and argument associated with a specific command.
NOTE
This command may be replaced in future releases by the dcecp command, and may no longer be supported at that time.
EXAMPLES
The following command operates from the system prompt to display the internal commands of the control program: $ rpccp help The following
commands start the control program and display the syntax of the remove entry command: $ rpccp rpccp> help remove entry
RELATED INFORMATION
Commands: add element(1m), add entry(1m), add member(1m), export(1m), import(1m), remove element(1m), remove entry(1m), remove group(1m),
remove mapping(1m), remove member(1m), remove profile(1m), rpccp(1m), show entry(1m), show group(1m), show mapping(1m), show profile(1m),
show server(1m), unexport(1m)help(1m)