03-11-2009
Hi I had downloaded LAN Drivers from Realtek Website and i followed the instructions mentioned in the document but i dont understand what is scoadmin please if any one can explain what it mean
This is the Document from Realtek:-
SCO UnixWare 7.x
Introduction:
-------------
This document describes the procedure to install the SCO UnixWare 7
driver for Realtek RTL8139C+/8139/810x Family Fast Ethernet Adapter.
Location of Driver: \uw7\rtspkg.tar
Installing driver procedure on SCO UnixWare7 :
-----------------------------------------
Before you start with the installation process, make sure that the
SCO UNIX system is properly installed. Similarly, your adapter should
also be properly installed in your machine.
1. Installation Diskette in DOS format.
Put RTL SCO UnixWare Driver diskette to floppy A: and use doscp
command to copy RTL SCO UnixWare Driver into UNIX's directories.
NOTE: In UnixWare 7.1.1, you must install the "mtools" package included
within the OS and use "mcopy" instead of "doscp".
# cd /
# doscp A:uw7/rtspkg.tar /tmp
2. Run 'tar' utility to extract the driver.
# cd /tmp
# tar -xvf rtspkg.tar
3. Run 'pkgadd' utility to add the driver software to system.
# pkgadd -d /tmp/pkg
=> Select "RTL8139" to add the driver package to the system.
=> quit
4. Use 'scoadmin' utility to add adapters.
# scoadmin
=> Select "Networking" item from the item list and press enter.
=> Select "Network Configuration Manager" item from the item list
and press enter.
=> Select "Add New Lan Adapter" menu item from "Hardware".
=> Select the Realtek RTL8139C+/8139/810x item from the item list.
=> Add protocol(s) to the adapter.
5. Return to the command prompt.
6. Shutdown the system and reboot.
NOTE: 1. If you want to install more than one network adapter, you
should do the 4th, 5th, 6th steps above for each network card
separately.
2. This driver can support up to four network adapters.
9 More Discussions You Might Find Interesting
1. Solaris
Hi,
Has anybody got Solaris 10 drivers for the Marvell 88E8001 (Yukon) Gigabit LAN? I downloaded the Solaris 7+ drivers from the ASUS website, but they don't seem to work. Has anybody else had any lucK?
Thanks,
Chris. (0 Replies)
Discussion started by: christian_hicks
0 Replies
2. Solaris
After seeing that http://sol-enet.sourceforge.net/support.shtml had drivers for my NIC, I decided to download them on my windows machine so I could burn them to a CD and install them on my old gateway so I could try to get it on the internet. While following the instructions with the drivers, I... (2 Replies)
Discussion started by: xtremepancakez
2 Replies
3. UNIX for Dummies Questions & Answers
Please, I'm From Argentina, And I Need To Know If The Drivers Of Program Unix, Version 5.01 Is Compatible Whit Drivers Of The Printer Epson Fx-2190
Thanks, And I Hope Yuor Answer. (0 Replies)
Discussion started by: juan alberghina
0 Replies
4. Solaris
Hi ,
I am trying to configure a private LAN and corporate LAN on the same machien on Solaris 10.
How can I achieve this?
Thanks (1 Reply)
Discussion started by: deedee
1 Replies
5. UNIX for Dummies Questions & Answers
Hi ,
i am working on aix.
when i am tarring a folder using the command
tar cf /home/test45/res rpt
i am getting an error like
tar: res rpt/Idaho_110_20079245268_Plan_OverPayment_summary_rpt_v2.1.xls: file changed as we read it
vat may be the issue...
please advice
sam (1 Reply)
Discussion started by: sam99
1 Replies
6. Solaris
Hi Friends,
I am using solaris in my home pc and i saw some errors messages running while i shutting down, so I want to find out the Error messages while booting error messages and error messages while shutting down. i know we can find in /var but dont know the exact location. Thanks in Advance (2 Replies)
Discussion started by: kurva
2 Replies
7. IP Networking
Hi,
We have a website running on a local centos 5.4 surfer, static IP.
The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server.
My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine.
However, we cannot see... (3 Replies)
Discussion started by: lawstudent
3 Replies
8. Solaris
I will install Solaris over network using JumpStart and DHCP protocol. This is first time I am doing such a work and need few questions.
First question
I heard Solaris DHCP server likes to take a lunch break, don't know from experience but my collegue told me so and I don't have any reason... (3 Replies)
Discussion started by: solaris_user
3 Replies
9. UNIX for Dummies Questions & Answers
I got every time the same error leaving directory etc when i install any software. I put up the command and the error below, kindly help me out so i could proceed.
csm@csm-HP-Z420:~$ cd Desktop/
csm@csm-HP-Z420:~/Desktop$
csm@csm-HP-Z420:~/Desktop$ cd microtar-0.9.6/... (8 Replies)
Discussion started by: harpreetmanku04
8 Replies
LEARN ABOUT DEBIAN
if_urtw
URTW(4) BSD Kernel Interfaces Manual URTW(4)
NAME
urtw -- Realtek RTL8187B/L USB IEEE 802.11b/g wireless network device
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device ehci
device uhci
device ohci
device usb
device urtw
device wlan
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_urtw_load="YES"
DESCRIPTION
The urtw driver supports USB 802.11b/g wireless adapters based on the Realtek RTL8187B/L.
urtw supports station and monitor mode operation. Only one virtual interface may be configured at any time. For more information on config-
uring this device, see ifconfig(8).
HARDWARE
The urtw driver supports Realtek RTL8187B/L based wireless network devices, including:
Card Radio Bus
Belkin F5D7050E RTL8225 USB
Linksys WUSB54GCv2 RTL8225 USB
Netgear WG111v2 RTL8225 USB
Netgear WG111v3 RTL8225 USB
Safehome WLG-1500SMA5 RTL8225 USB
Shuttle XPC Accessory PN20 RTL8225 USB
Sitecom WL168v1 RTL8225 USB
Sitecom WL168v4 RTL8225 USB
SureCom EP-9001-g(2A) RTL8225 USB
TRENDnet TEW-424UB V3.xR RTL8225 USB
EXAMPLES
Join an existing BSS network (i.e., connect to an access point):
ifconfig wlan create wlandev urtw0 inet 192.168.0.20
netmask 0xffffff00
Join a specific BSS network with network name ``my_net'':
ifconfig wlan create wlandev urtw0 ssid my_net up
Join a specific BSS network with 64-bit WEP encryption:
ifconfig wlan create wlandev urtw0 ssid my_net
wepmode on wepkey 0x1234567890 weptxkey 1 up
SEE ALSO
intro(4), netintro(4), usb(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4), ifconfig(8), wpa_supplicant(8)
Realtek, http://www.realtek.com.tw.
HISTORY
The urtw device driver first appeared in FreeBSD 8.0.
AUTHORS
The urtw driver was written by Weongyo Jeong <weongyo@FreeBSD.org>.
BSD
October 17, 2009 BSD