Unexpected df behavior Post: 302295992

Sponsored Content

Operating Systems Solaris Unexpected df behavior Post 302295992 by Sapfeer on Tuesday 10th of March 2009 06:11:32 AM

03-10-2009

Registered User

Unexpected df behavior

Hi,

I have Sun SPARC Enterprise T5140 with two 2,5" 15rpm 146GB SAS HDD. In friday there were a lot of errors with fs on them. After reconfiguring all seemed to be fine but today I get the following strange behavior of df -kh command and troubles with files, I written on first disk in friday. Here is the output:

Code:

[ root@myserver Tue Mar 10 12:09:52 2009 ]
/opt/IBM/informix # df -kh
Filesystem             size   used  avail capacity  Mounted on
/dev/dsk/c1t0d0s0       15G   7.0G   7.6G    49%    /
/devices                 0K     0K     0K     0%    /devices
ctfs                     0K     0K     0K     0%    /system/contract
proc                     0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
swap                    22G   1.5M    22G     1%    /etc/svc/volatile
objfs                    0K     0K     0K     0%    /system/object
/platform/SUNW,T5140/lib/libc_psr/libc_psr_hwcap2.so.1
                        15G   7.0G   7.6G    49%    /platform/sun4v/lib/libc_psr
/platform/SUNW,T5140/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1
                        15G   7.0G   7.6G    49%    /platform/sun4v/lib/sparcv9/
fd                       0K     0K     0K     0%    /dev/fd
/dev/dsk/c1t0d0s4      9.9G   776M   9.0G     8%    /var
swap                    22G    32K    22G     1%    /tmp
swap                    22G    48K    22G     1%    /var/run
/dev/dsk/c1t0d0s5      4.9G   1.1G   3.8G    23%    /opt
/dev/dsk/c1t1d0s6      4.9G   1.0G   3.9G    21%    /tsmdata/secondary
/dev/dsk/c1t0d0s6      4.9G 16384E   7.9G 360324636036332% /tsmdata/primary
/dev/dsk/c1t1d0s3      4.9G   4.0G   896M    83%    /dbspaces/myserver/mirror
/dev/dsk/c1t0d0s3      4.9G 16384E   7.9G 360324636036332% /dbspaces/myserver/root

[ root@myserver Tue Mar 10 12:16:49 2009 ]
/ # ls -ei /dbspaces/myserver/root/vol01 /tsmdata/primary/vol01
         4 -rw-r--r--   1 tsmadm   tsmadm   1074790400 Mar  6 15:24:13 2009 /dbspaces/myserver/root/vol01
         4 -rw-r--r--   1 tsmadm   tsmadm   1074790400 Mar  6 15:24:13 2009 /tsmdata/primary/vol01

[ root@myserver Tue Mar 10 12:17:27 2009 ]
/ # mount | grep dsk
...
/tsmdata/primary on /dev/dsk/c1t0d0s6 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=800006 on Tue Mar 10 11:48:48 2009
...
/dbspaces/myserver/root on /dev/dsk/c1t0d0s3 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=800003 on Tue Mar 10 11:48:48 2009

[ root@myserver Tue Mar 10 12:27:50 2009 ]
/ # iostat -iE
sd0       Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE  Product: ST914602SSUN146G Revision: 0603 Device Id: id1,sd@n5000c5000c7db607
Size: 146.80GB <146800115712 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
sd1       Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE  Product: ST914602SSUN146G Revision: 0603 Device Id: id1,sd@n5000c5000c7db17f
Size: 146.80GB <146800115712 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
sd2       Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
Vendor: TSSTcorp Product: CD/DVDW TS-T632A Revision: SR03 Device Id:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0

Sapfeer

View Public Profile for Sapfeer

Find all posts by Sapfeer

9 More Discussions You Might Find Interesting

1. Programming

ls behavior

I put this here because it is a 'behavior' type question.. I seem to remember doing ls .* and getting all the .-files, like .profile .login etc. But ls .* doesn't do that, it lsts the contents of every .*-type subdirectory. Is it supposed to? I should think that a -R should be given to...

2. Programming

Behavior of pthreads

Hi All, I ve written a small program to get started off with pthreads. I somehow feel the program doesnt meet the purpose. Please find the code and the output below. Please find my question at the bottom. #include <pthread.h> #include <stdio.h> #include <stdlib.h> void *PrintThread1(void...

3. AIX

LUN Behavior

Aix 6.1, working with a nim master and nim_altmaster both LPARS have access to the same data LUN, /nimdisk I do realize the risks of having 2 servers access the same LUN, however it serves the purpose of being able to restore mksysb's to/from our DR site if necessary, at least in theory ;) ...

4. UNIX for Dummies Questions & Answers

Weird behavior of Vi

Hi there, I am a bit puzzled by a weird behavior of Vi. I very simply would like to add increased numbers in some files. Since I have many thousands entries per file and many files, I would like to macro it in vi. To do this, I enter the first number ("0001") on the first line and then yank...

5. IP Networking

iptables DNAT of outgoing destination port, unexpected behavior

Not sure if this should be here or in the security section. I am developing software that dynamically manipulates netfilter/iptables rules (through system() calls of the command strings, I'm not trying to hack the netfilter code). Basically, UDP messages that are sent by an application on, say,...

6. UNIX for Advanced & Expert Users

unexpected behavior bash, set -o vi, history -a, and HISTFILE

I am trying to get my history in sync in multiple bash sections and things aren't working the way I expect. Desired behavior, hitting esc-K in all bash sessions (same userid and machine) will use the same history. Observed behavior: Esc-k shows the history of the current session, rather than...

7. UNIX for Dummies Questions & Answers

Launchd-owned processes unexpected behavior

Ok, so I have been struggling with this for a few days and I think I need an explanation of a few things before I go any further. I'm not sure it's possible to do what I'm trying, so before I pull my hair out, here is what I'm doing: I have written a program in LiveCode that sits on our...

8. Shell Programming and Scripting

Unexpected Echo Behavior

Hello all, I have a basic issue that I can't seem to search for since I'm not sure how to describe the behavior. Could anyone kindly assist the novice? (Sample) File Data: bundle-ppp-1/1.78 bundle-ppp-1/2.80 bundle-ppp-1/1.79 bundle-ppp-1/2.81 bundle-ppp-1/1.80 bundle-ppp-1/2.82...

9. UNIX for Beginners Questions & Answers

awk Behavior

Linux Release Uname details Data file Ive been at the command line for some time. Back as far as SCO and Interactive Unix. I have always used this construct without issues. I want to isolate the ip / field 1. As you can see .. the first line is "skipped". This works as...

LEARN ABOUT X11R4

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)