Reg. Ethernet port Post: 302288245

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

determining ethernet port speed in solaris

i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay. i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card?

2. Solaris

Ethernet Port Name

I have a new Sun 440 and I am trying to configure it. Non of the Ethernet ports are enabled; when I issue "ifconfig -a" it returns nothing. Is there a way to know the available port name (e.g. ce, bge, etc.) by running a command or so ?

3. Solaris

Reg- eth0,eth1 (ethernet card)

Hi Guys, I am working as a L-1 support and i want to know that are the precaution need to take on eth0(Ethernet card) i heard on production server it is very much important, what are the steps need to observe on this tickets.

4. AIX

A problem with an unused ethernet port reporting as down...

Good morning, Saw this on a system this morning, thought I'd check with this group before calling IBM. Basically what we have here is a P7 running 6.1 reporting the following in errpt: LABEL: GOENT_LINK_DOWN IDENTIFIER: EC0BCCD4 This is for ent4, which is odd because we...

5. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

6. Shell Programming and Scripting

command to match ethernet port to network card

hi I juts want to know if there is a command that checks if an ethernet port corresponds to a network card. ex. I have 3 network cards, one is two ports, and the other two 8 ports. How do I know that eth0 corresponds to the the two-port network card and eth9 corresponds to the first 8-port...

7. Red Hat

Ethernet Port device path?

Hi, I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0 Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of. Anyone...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT CENTOS

slist

SLIST(1)							       slist								  SLIST(1)

NAME

       slist - Lists available NetWare Servers

SYNOPSIS

       slist [ pattern ]

DESCRIPTION

       slist lists all NetWare Servers available in your network.

       If slist does not print to a tty, the decorative header line is not printed, so that you can count the servers on your network by doing

       slist | wc -l

OPTIONS

       pattern
	  pattern is used to list only servers whose names match the specified pattern. For a server to be listed, the pattern must match the full
	  server name. You can use wildcards for the pattern, but you must protect these wildcards from any command  line  expansion  by  quoting.
	  Case doesn't matter.

EXAMPLE

       slist "I*"

       or

       slist "i*"
	      List all available Netware servers on your Network, that begin with an "I".

SEE ALSO

       ncpmount(8), ncpumount(8), pqlist(1), nprint(1)

CREDITS

       slist was written by Volker Lendecke (lendecke@math.uni-goettingen.de)

BUGS

       slist works only in IPX environment, as it uses SAP to find first server and then Bindery to get list of servers.

slist								    01/07/1996								  SLIST(1)