I have a file, not really a csv, but containing delineated data just the same. Lets call that file "raw_data.txt". It contains data in the format of company name:fein number like this:
what i need to do is read this file, apply sha1 to the fein field and then output that into a new file, we'll call "hashed_data.txt". So hashed_data.txt should contain data like
i have tried looping thru the file with awk like so
but I'm stuck on how to run the second field thru sha1sum
Hi
I have a CSV file with me in this format
Currency, USD, EUR,
USD, 1.00, 1.32,
EUR, 0.66, 1.00,
How do I transpose the file to get to the format below.
currency, currency, rate
USD, USD, 1.00
USD, EUR, 1.32
EUR, USD, 0.66
EUR, EUR, 1.00
Thanks for your help
We are using... (2 Replies)
Folks,
I have a bit of an issue trying to obtain some data from a csv file using PERL. I can sort the file and remove any duplicates leaving only 4 or 5 rows containing data. My problem is that the data contained in the original file contains a lot more columns and when I try ro run this script... (13 Replies)
Hi,
It's been a few years since college when I did stuff like this all the time. Can someone help me figure out how to best tackle this problem? I need to parse a file full of entries that look like this:
<eq action="A" sectyType="0" symbol="PGR" exch="CA" curr="VEF" sess="NORM"... (7 Replies)
Hi,
Our requirement is to parse the input file(.csv format). The each column in the file is delimited with comma. We need to take each column and apply some business validation rule.
If data itself contains comma, then those fields are enclosed with double quotes ("). We can see this double... (7 Replies)
hi
i want to generate SHA1 hash of string in Linux (atmark) and downloaded the XYSSL-0.9 version code for the same.i have the algorithm which takes file as argument and returns hash of file . And of same file while I generated the key using online tools then it doesn't match with my compiled... (4 Replies)
Hello Expert,
I have a file in the following format:
SYNTAX_VERSION 5
MONITOR "NAME_TEMPLATES"
DESCRIPTION "Monitors for contents of error "
INTERVAL "1m"
MONPROG "script.sh NAME_TEMPLATES"
MAXTHRESHOLD
GEN_BELOW_RESET
SEVERITY Major
... (17 Replies)
My source file looks like this:
Cust-Number = "101"
Cust-Name="Joe"
Cust-Town="London"
Cust-hobby="tennis"
Cust-purchase="200"
Cust-Number = "102"
Cust-Name="Mary"
Cust-Town="Newyork"
Cust-hobby="reading"
Cust-purchase="125"
Now I want to parse this file (leaving out hobby) and... (10 Replies)
I have a .csv file and I want to md5 hash the second column for each row in the file.
File is something like
data1,foobar1,123,345
data2,foobar2,456,9393
data3,foobar3,1002,10109
Output would be like
data1,6c81243028f8e455fa617dd5f0232ce1,123,345... (3 Replies)
I am not too savvy with arrays and am assuming that what I am looking for needs arrays. This is my requirement.
So I have the raw data that gets updated to a log as shown below
StudentInfo:
FullInfo = {
Address = Newark
Age = 20
Name= John
}
StudentInfo:... (2 Replies)
Discussion started by: sidnow
2 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)