Run only /sbin/ifconfig, that should give you the IP of your machine
To connect to it by it's hostname (like the ones in school) your computer has to know what IP address hides behind it. This is usually done through DNS or the /etc/hosts file (%SYSTEM32%\drivers\etc\hosts on Windows XP)
/etc/hosts is what I have from my first post.
Unable to connect to ubuntuHome and /sbin/ifconfig gives address of 192.168.1.103 and still unable to connect. I am behind a router if that matters.
I have a network consisting of Linux Server, Win-Nt & 95 OS. I am able to connect from Linux to Win-NT using either ftp / telnet in time. But it takes me around & more than 50 seconds to connect from Wint -Nt/95 to Linux using either ftp/telnet. My network is small & it hardly consists 20-25... (3 Replies)
i have written a TCP client server application in c under unix. The windows systems should also be alowed to connect to the TCP server running on linux.So i wrote a small client application in VB using winsock. The client and server works fine in the linux environment. When i tried to connect the... (0 Replies)
Hi,
I am doin a project that'll work as a normal Explorer on Windows
but the best thing is it'll be exploring the content of a UNIX server.
The application would be runnin on the windows platform with probably a
FTP server on UNIX server.
How i should proceed? (2 Replies)
hello everyone. I tried searching for something related to this, but I figured it was time to ask my own question. I am experiencing these problems using Ubuntu 7.04
I am starting up a TCP listener/server and once connected, will act as a communication/control link with a program on another... (3 Replies)
Hello
i want to connect my solaris & Linux boxes to ntp server
i used the command
/usr/sbin/ntpdate -s -b -p 8 -u <NTP-IP>
and added the NTP server as server in /etc/ntp.conf
please help in completing the process and verifying it (1 Reply)
Hi,
I have a situation where i need to communicate a linux client with a windows server, I am using a UDP socket communication channel. I am able to send packets from my linux clients to the windows server but unable to receive any data packet from the server. Do i need to make any setting in... (0 Replies)
Hi,
One of the folders in UNIX is mapped with a drive on Windows.From this UNIX machine I want to connect to the Windows Server, perform some checks and view the results back on the UNIX machine.
For e.g. if I touch a file under the shared folder on UNIX, I should be able to telnet to Windows... (2 Replies)
Hi experts - I hope you can help me.
I am trying to resolve Windows host names (aka Netbios names, aka "UNC names) from a Linux box.
I have added "dns wins" to the "hosts" line at /etc/nsswitch.conf, and installed samba 3.2.2 and ran "winbindd -D".
Now, when I go: "wbinfo -N venus" (where... (1 Reply)
I am trying to connect to a Windows server say 10.1.1.10. This servers has a folder named RAJ in which there are multiple .zip files. All these zip files contain a text file called XYZ.txt. Now i have to merge the content of these XYZ.txt files from each of the .zip file and create a new text... (1 Reply)
I'm trying to setup a small home network environment as a pet project. These are physical machines nothing virtual. Any help or ideas is greatly appreciated.
I can ping between both machines and I have Samba established and can read/write different shares. When I try to SSH from Windows 8.1... (10 Replies)
Discussion started by: lombardi4851
10 Replies
LEARN ABOUT V7
hosts
HOSTS(5) Linux Programmer's Manual HOSTS(5)NAME
hosts - static table lookup for hostnames
SYNOPSIS
/etc/hosts
DESCRIPTION
This manual page describes the format of the /etc/hosts file. This file is a simple text file that associates IP addresses with hostnames,
one line per IP address. For each host a single line should be present with the following information:
IP_address canonical_hostname [aliases...]
Fields of the entry are separated by any number of blanks and/or tab characters. Text from a "#" character until the end of the line is a
comment, and is ignored. Host names may contain only alphanumeric characters, minus signs ("-"), and periods ("."). They must begin with
an alphabetic character and end with an alphanumeric character. Optional aliases provide for name changes, alternate spellings, shorter
hostnames, or generic hostnames (for example, localhost).
The Berkeley Internet Name Domain (BIND) Server implements the Internet name server for UNIX systems. It augments or replaces the
/etc/hosts file or hostname lookup, and frees a host from relying on /etc/hosts being up to date and complete.
In modern systems, even though the host table has been superseded by DNS, it is still widely used for:
bootstrapping
Most systems have a small host table containing the name and address information for important hosts on the local network. This is
useful when DNS is not running, for example during system bootup.
NIS Sites that use NIS use the host table as input to the NIS host database. Even though NIS can be used with DNS, most NIS sites still
use the host table with an entry for all local hosts as a backup.
isolated nodes
Very small sites that are isolated from the network use the host table instead of DNS. If the local information rarely changes, and
the network is not connected to the Internet, DNS offers little advantage.
FILES
/etc/hosts
NOTES
Modifications to this file normally take effect immediately, except in cases where the file is cached by applications.
Historical notes
RFC 952 gave the original format for the host table, though it has since changed.
Before the advent of DNS, the host table was the only way of resolving hostnames on the fledgling Internet. Indeed, this file could be
created from the official host data base maintained at the Network Information Control Center (NIC), though local changes were often
required to bring it up to date regarding unofficial aliases and/or unknown hosts. The NIC no longer maintains the hosts.txt files, though
looking around at the time of writing (circa 2000), there are historical hosts.txt files on the WWW. I just found three, from 92, 94, and
95.
EXAMPLE
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 localhost
# 127.0.1.1 is often used for the FQDN of the machine
127.0.1.1 thishost.mydomain.org thishost
192.168.1.10 foo.mydomain.org foo
192.168.1.13 bar.mydomain.org bar
146.82.138.7 master.debian.org master
209.237.226.90 www.opensource.org
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
SEE ALSO hostname(1), resolver(3), host.conf(5), resolv.conf(5), resolver(5), hostname(7), named(8)
Internet RFC 952
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the
latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 HOSTS(5)