you've to give the ilom a ip with dhcp or a static one via the serial port. on the serial port login to the ilom with root and the default password. if you don't know the default one, i'll send it to you via pm, just ak. after login to serial console type:
and you'll come to the "ok" prompt after the post. to setup network with static ip go to "cd /SP/network" and do all needed settings there!
Hi all,
I have just replaced the HDD on a Ultra 5 Spark machine, now I need to reinstall Solaris 9.
The problem is: how do I get to the OK prompt without a Sun keyboard in order to boot from CD?
At moment when I power on the machine I get the following error:
Timeout Waiting for ARP/RARP... (13 Replies)
Hi,
I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?... (12 Replies)
Hi,
I need configure this server for two zones (oracle and glassfish). Server has 2CPU 8cores = 128vcpu and 16 GB RAM.
I am interested in mainly the division of the processor and memory.
What was the configuration that best for Oracle zones? (4 Replies)
Hi all,
I use latest bind 9.6.1, brand-new T5140 Sun Server, 10u8 Solaris OS, Mar-2010 OS patch to configure a caching dns server.
But bind always hang up when process/cache is reaching to 500 Mb ( Though 'prstat -a' check )
Can anyone help me a solution for this problem, i will greatly... (0 Replies)
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
I've been busy and fell behind on Sun/Oracle. Forgive me if too basic. I welcome brief, cryptic, or advanced replies. I also welcome noobie information since I may have no clue what's up at the moment.
Problem statement:
I inherited a computer to set up. I would rather not figure out 8 months... (1 Reply)
Hi All,
We have a T5140 server which has 128 threads in total. Is it possible to reduce the number of threads per core through some configuration changes? I am sorry for being so naive but I am one on this.
Why would I like to do this? Unfortunately we have this for an Oracle Database Server... (6 Replies)
I am having a problem when booting my Sun V445 machine with Solaris 10 installed on it. Machine hangs at boot at following step :
0>Copyright 2007 Sun Microsystems, Inc. All rights reserved
0>OBP->POST Call with %o0=00000800.01014000.
0>Diag level set to MAX.
0>Verbosity level set to... (21 Replies)
Discussion started by: usmanijaz101
21 Replies
LEARN ABOUT SUSE
login.krb5
LOGIN(8) System Manager's Manual LOGIN(8)NAME
login.krb5 - kerberos enhanced login program
SYNOPSIS
login.krb5 [-p] [-fFe username] [-r | -k | -K | -h hostname]
DESCRIPTION
login.krb5 is a modification of the BSD login program which is used for two functions. It is the sub-process used by krlogind and telnetd
to initiate a user session and it is a replacement for the command-line login program which, when invoked with a password, acquires Ker-
beros tickets for the user.
login.krb5 will prompt for a username, or take one on the command line, as login.krb5 username and will then prompt for a password. This
password will be used to acquire Kerberos Version 5 tickets (if possible.) It will also attempt to run aklog to get AFS tokens for the
user. The version 5 tickets will be tested against a local krb5.keytab if it is available, in order to verify the tickets, before letting
the user in. However, if the password matches the entry in /etc/passwd the user will be unconditionally allowed (permitting use of the
machine in case of network failure.)
OPTIONS -p preserve the current environment
-r hostname
pass hostname to rlogind. Must be the last argument.
-h hostname
pass hostname to telnetd, etc. Must be the last argument.
-f name
Perform pre-authenticated login, e.g., datakit, xterm, etc.; allows preauthenticated login as root.
-F name
Perform pre-authenticated login, e.g., datakit, xterm, etc.; allows preauthenticated login as root.
-e name
Perform pre-authenticated, encrypted login. Must do term negotiation.
CONFIGURATION
login.krb5 is also configured via krb5.conf using the login stanza. A collection of options dealing with initial authentication are pro-
vided:
krb5_get_tickets
Use password to get V5 tickets. Default value true.
krb_run_aklog
Attempt to run aklog. Default value false.
aklog_path
Where to find it [not yet implemented.] Default value $(prefix)/bin/aklog.
accept_passwd
Don't accept plaintext passwords [not yet implemented]. Default value false.
DIAGNOSTICS
All diagnostic messages are returned on the connection or tty associated with stderr.
SEE ALSO rlogind(8), rlogin(1), telnetd(8)LOGIN(8)