Sponsored Content
Full Discussion: Wipe a Sunfire V480
Operating Systems Solaris Wipe a Sunfire V480 Post 302272269 by slowatsch on Tuesday 30th of December 2008 05:28:34 AM
Old 12-30-2008
Data

Update:

Well I tried to boot from CD now and I'm stuck on booting it. Yes I read the threads but somehow I didn't found my case.

I have the cdrom on the ide slot. Probe-ide shows:
Quote:
Device 0 ( Primary Master )
Removable ATAPI Model: TOSHIBA ODD-DVD SD-C2732
The disks are on the scsi bus.

I tryed to boot the system with "boot cdrom"
Error:
Quote:
Bad magic number in disk label (sometimes this error is missng, sometimes not)
Can't open disk label package

Can't open boot device
I read the last thread about it and tryed to find it in the OS... but well I somehow failed.

Format shows:
Quote:
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000087850350,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w210000008783f106,0
ls /dev/dsk/ :
Quote:
c0t0d0s0 c0t0d0s3 c0t0d0s6 c1t0d0s1 c1t0d0s4 c1t0d0s7 c1t1d0s2 c1t1d0s5
c0t0d0s1 c0t0d0s4 c0t0d0s7 c1t0d0s2 c1t0d0s5 c1t1d0s0 c1t1d0s3 c1t1d0s6
c0t0d0s1 c0t0d0s4 c0t0d0s7 c1t0d0s2 c1t0d0s5 c1t1d0s0 c1t1d0s3 c1t1d0s6
But I can't find the right device in /dev/rdsk/... I tried ct0d0s6 but no success.

It's a burned CD, but I also tried it with a DVD and a pressed CD. Always no success.

Well I need a way to wipe this machine soon, because I should sell it asap Smilie

But there is no way without CD right?
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

V480 w/ Solaris 9 boot problem

Our V480 w/ Solaris 9 would not boot properly. After recreating the LUNs on our StorEdge A1000, and then performing a reboot, the machine just keep cycling through the boot process. No error messages, it keeps trying to reboot over and over again. Any ideas? We managed to do a stop+a and... (6 Replies)
Discussion started by: xnightcrawl
6 Replies

2. Solaris

What do you use to wipe your disks?

What are y'all using to wipe your solaris disks? I am being question by IT Security, what I am using to wipe disk. Is anyone using a 3rd party utility? I have used the format utility in solaris previously. But they are looking for something commercial that I can use. Anyone have... (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies

3. Solaris

Telnet issue E5500/V480

Our old E5500 was just turned off (planned :rolleyes: ) and the application was moved to a V480. Now if I login to the V480 and try to sudo to root my connection hangs, and I can not telnet to the E5500 after it was powered on again. I get "connection refused". Telnet to this machine was... (5 Replies)
Discussion started by: kjbaumann
5 Replies

4. Solaris

PCI slot info on V480/V490

Hi, How can I know slot wise info on a sun v480 box. I want to have the details like which slot has which card (slot 1- HBA, slot 2 - quad NIC) .. I know that sysdef, prtconf or prtdiag outputs will help to get this. But I dont know how to conclude from those outputs. Can anybody help me to... (4 Replies)
Discussion started by: vasu2020
4 Replies

5. UNIX for Dummies Questions & Answers

Reommendations for hp-ux wipe software

I am looking for software to do DoD compiliant wipes on Hp-Ux. Thank you in advance for any recommendations provided. (1 Reply)
Discussion started by: jim15800
1 Replies

6. UNIX for Advanced & Expert Users

Wipe software for Hp-ux

I am looking for recommendations on DOD compliante software to wipe disk on HP-UX. Any recommendations would be appreciated. Thank you in advance for any assistance provided. (1 Reply)
Discussion started by: jim15800
1 Replies

7. Solaris

Solaris 8 on v480 & v490

Hello, Can any kind soul please answer this? I want to boot a SunFire v490 with a dvd image we use to boot v480's. Is this possible? Are there caveats to doing this? Thanks muchly, mgb (1 Reply)
Discussion started by: mgb
1 Replies

8. Cybersecurity

How do I wipe stdout?

Today I used Terminal (invoked from Mac OS X 10.4.11) to view some data that is secured by a password. After exiting Terminal, it occurred to me that a vestige of the data displayed on my screen might reside in memory or in disk file ... the actual file used for stdout, for example. Do I need... (1 Reply)
Discussion started by: dcollins
1 Replies

9. HP-UX

Wipe tool for HP-UX

Hi, Please suggest wipe tool for hp-ux. (2 Replies)
Discussion started by: manoj.solaris
2 Replies

10. Solaris

Solaris box completely wipe

HI, I woluld like to know is it possible to boot solairs into single usermode from cd and using format -> purge command to wipe all the disk? please suggest or any other method ? my requirement is to completely wipe solaris box. (4 Replies)
Discussion started by: manoj.solaris
4 Replies
TPM QUOTE 
TOOLS(8) TPM QUOTE TOOLS(8) NAME
TPM Quote Tools PROGRAMS
tpm_mkuuid, tpm_mkaik, tpm_loadkey, tpm_unloadkey, tpm_getpcrhash, tpm_updatepcrhash, tpm_getquote, tpm_verifyquote DESCRIPTION
TPM Quote Tools is a collection of programs that provide support for TPM based attestation using the TPM quote operation. A TPM contains a set of Platform Configuration Registers (PCRs). In a well configured machine, some of these registers are set to known values during the boot up process or at other times. For example, a PCR might contain the hash of a boot loader in memory before it is run. The TPM quote operation is used to authoritatively verify the contents of a TPM's Platform Configuration Registers (PCRs). During provi- sioning, a composite hash of a selected set of PCRs is computed. The TPM quote operation produces a composite hash that can be compared with the one computed while provisioning. To use the TPM quote operation, keys must be generated. During provisioning, an Attestation Identity Key (AIK) is generated for each TPM, and the public part of the key is made available to entities that validate quotes. The TPM quote operation returns signed data and a signature. The data that is signed contains the PCRs selected for the operation, the composite hash for the selected PCRs, and a nonce provided as input, and used to prevent replay attacks. At provisioning time, the data that is signed is stored, not just the composite hash. The signature is discarded. An entity that wishes to evaluate a machine generates a nonce, and sends it along with the set of PCR used to generate the composite PCR hash at provisioning time. For this use of the TPM quote operation, the signed data is ignored, and the signature returned is used to val- idate the state of the TPM's PCRs. Given the signature, the evaluating entity replaces the nonce in the signed data generated at provi- sioning time, and checks to see if the signature is valid for the data. If so, this check ensures the selected PCRs contain values that match the ones measured during provisioning. A typical scenario for an enterprise using these tools follows. The tools expect AIKs to be referenced via one enterprise-wide Universally Unique Identifier (UUID). The program tpm_mkuuid creates one. For each machine being checked, an AIK is created using tpm_mkaik. The key blob produced is bound to the UUID on its machine using tpm_loadkey. The public key associated with the AIK is sent to the entities that verify quotes. Finally, the expected PCR composite hash is obtained using tpm_getpcrhash. When the expected PCR values change, a new hash can be generated with tpm_updatepcrhash. The program to obtain a quote, and thus measure the current state of the PCRs is tpm_getquote. The program that verifies the quote describes the same PCR composite hash as was measured initially is tpm_verifyquote. SEE ALSO
tpm_mkuuid(8), tpm_mkaik(8), tpm_loadkey(8), tpm_unloadkey(8), tpm_getpcrhash(8), tpm_updatepcrhash(8), tpm_getquote(8), tpm_verifyquote(8) Oct 2010 TPM QUOTE TOOLS(8)
All times are GMT -4. The time now is 03:56 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy