problem after adding new ide disk Post: 302272024

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

adding disk to ultra10

I enquired before about adding another disk to an ultra 10... and was told it was possible... Well - since then I got my hands on another ultra 10 - and have taken the disk out of that one... I should be able to connect it up - but I am wondering - should this be mounted in any partiulcar...

2. Solaris

adding new disk to cluster

Dear all , I am new to sun cluster and i having a problem adding a disk to a disk group . My platfrom consists of a clustered E6900 SUN server and an EMC DX1000 storage . the disk group that iam trying to add the disk to is shared group , whwen i run vxdisk list i get in status "online...

3. AIX

IDE DISK ERR2 and LVM SA STALEPP errors in errpt

Hi, I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions? Regards Gareth

4. HP-UX

disk adding through lvm

Hi dear(s) Can u explain how to add a disk through lvm with commands. I need to add a 9 gb scsi HS disk to a Hp D class 9000 server.

5. Filesystems, Disks and Memory

shift hard disk from primary IDE channel to secondary IDE channal

Wellcomes All, some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE...

6. Filesystems, Disks and Memory

Wrong BIOS IDE Settings on a SATA disk (AHCI)?

Hello, I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future. Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The...

7. UNIX Desktop Questions & Answers

Maximize IDE Hard Disk

Hi there! I am installing Unixware 7.1 to a new server. We usually use SCSI hard for this but since this will be used only for testing, I decided to use an 80GB IDE hard disk. I was able to successfully load the unix but found out that the 80GB hard disk was not maximized. The total hard disk...

8. Filesystems, Disks and Memory

Adding a disk

Recently added a disk to a clariion array system, binded it as a raid 5, now I have no clue how to see it in dg-unix. I want to add it to a current filesystem, and now i'm down river without a paddle.

9. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk?

10. AIX

Adding New Hard Disk

Hi, On P5 I would like to add hard drive, currently 2 hard disk are already exists, would like to add one more, 2 Slots are emtpy, I would like to know how to find out wheather adapter is attached to that 2 free slot using command.

LEARN ABOUT HPUX

vxbootsetup

vxbootsetup(1M) 														   vxbootsetup(1M)

NAME

       vxbootsetup - set up system boot information on a Veritas Volume Manager disk

SYNOPSIS

       /etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]

DESCRIPTION

       The  vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
       disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk.  All of these volumes must
       be contiguous with only one subdisk.

       The -g option may be used to specify the boot disk group.

       If  no  medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
       be bootable.

       If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.

       vxbootsetup requires that:

       o    The root volume must be named rootvol and must have a usage type of root.

       o    The swap volume must be named swapvol and must have a usage type of swap.

       o    The volumes containing /usr and /var (if any) must be named usr and var, respectively.

       See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on  how  the
       system boots and how VxVM impacts the system boot process.  The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
       If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to  make  the
       disk bootable.

ARGUMENTS

       medianame
	    Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.

SEE ALSO

       disksetup(1M),  edvtoc(1M),  vxassist(1M),  vxevac(1M),	vxinstall(1M),	vxintro(1M),  vxmake(1M),  vxmirror(1M), vxplex(1M), vxresize(1M),
       vxrootmir(1M)

       Veritas Volume Manager Troubleshooting Guide

VxVM 5.0.31.1							    24 Mar 2008 						   vxbootsetup(1M)

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

adding disk to ultra10

Discussion started by: frustrated1

2. Solaris

adding new disk to cluster

Discussion started by: ppass

3. AIX

IDE DISK ERR2 and LVM SA STALEPP errors in errpt

Discussion started by: m223464

4. HP-UX

disk adding through lvm

Discussion started by: sreekumar.R