Sponsored Content
Operating Systems Solaris problem after adding new ide disk Post 302271825 by kumarmani on Sunday 28th of December 2008 11:09:02 AM
Old 12-28-2008
No reborg, i tried removing the new disk and run the proab-ide and i was not able to get any thing so later i removed the original disk and tried probing probe-ide and i got the new disk and cdrom working
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

adding disk to ultra10

I enquired before about adding another disk to an ultra 10... and was told it was possible... Well - since then I got my hands on another ultra 10 - and have taken the disk out of that one... I should be able to connect it up - but I am wondering - should this be mounted in any partiulcar... (2 Replies)
Discussion started by: frustrated1
2 Replies

2. Solaris

adding new disk to cluster

Dear all , I am new to sun cluster and i having a problem adding a disk to a disk group . My platfrom consists of a clustered E6900 SUN server and an EMC DX1000 storage . the disk group that iam trying to add the disk to is shared group , whwen i run vxdisk list i get in status "online... (2 Replies)
Discussion started by: ppass
2 Replies

3. AIX

IDE DISK ERR2 and LVM SA STALEPP errors in errpt

Hi, I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions? Regards Gareth (4 Replies)
Discussion started by: m223464
4 Replies

4. HP-UX

disk adding through lvm

Hi dear(s) Can u explain how to add a disk through lvm with commands. I need to add a 9 gb scsi HS disk to a Hp D class 9000 server. (2 Replies)
Discussion started by: sreekumar.R
2 Replies

5. Filesystems, Disks and Memory

shift hard disk from primary IDE channel to secondary IDE channal

Wellcomes All, some times ago I 've installed a Debian ditribution on an Hard Disk who was set as Primary Master. Few days ago, I 've decided to install another Hard Disk with a different Operating System. When I did that, I turned off the old hard disk, and I mouted the new one on the Primary IDE... (1 Reply)
Discussion started by: thekarsillo
1 Replies

6. Filesystems, Disks and Memory

Wrong BIOS IDE Settings on a SATA disk (AHCI)?

Hello, I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future. Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The... (0 Replies)
Discussion started by: septima.pars
0 Replies

7. UNIX Desktop Questions & Answers

Maximize IDE Hard Disk

Hi there! I am installing Unixware 7.1 to a new server. We usually use SCSI hard for this but since this will be used only for testing, I decided to use an 80GB IDE hard disk. I was able to successfully load the unix but found out that the 80GB hard disk was not maximized. The total hard disk... (1 Reply)
Discussion started by: limpinmd
1 Replies

8. Filesystems, Disks and Memory

Adding a disk

Recently added a disk to a clariion array system, binded it as a raid 5, now I have no clue how to see it in dg-unix. I want to add it to a current filesystem, and now i'm down river without a paddle. (0 Replies)
Discussion started by: danceofillusion
0 Replies

9. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies

10. AIX

Adding New Hard Disk

Hi, On P5 I would like to add hard drive, currently 2 hard disk are already exists, would like to add one more, 2 Slots are emtpy, I would like to know how to find out wheather adapter is attached to that 2 free slot using command. (7 Replies)
Discussion started by: manoj.solaris
7 Replies
volunroot(8)						      System Manager's Manual						      volunroot(8)

NAME
volunroot - Remove Logical Storage Manager hooks for rootable volumes SYNOPSIS
/usr/sbin/volunroot [-a | -A] OPTIONS
Specifies that all volumes on the system disk be converted back to UNIX disk partitions, not just the root and swap volumes, rootvol and swapvol. Forces removal of the private region unless it is the last one in the system. DESCRIPTION
The volunroot script can be used to restore the accessibility of the root, swap, and other file systems on the boot disk directly through disk partitions instead of through volume devices. The script also removes other changes that were made to enable booting of the system from the root volume, so that the system will boot with no dependency on the Logical Storage Manager. When used with no options, volunroot affects only the root and swap volumes, rootvol and swapvol. For volunroot to work properly, only one plex must exist for each of the affected volumes. This plex must be the one created by volrootmir or the original plex created when the root disk was encapsulated. This ensures that the underlying subdisks will have equivalent partitions defined for them on the disk. If these conditions are not met, the volunroot operation fails and none of the volumes are converted to disk partitions. The unwanted plexes can be removed using either voledit or volplex. SEE ALSO
volencap(8), voldiskadm(8), voledit(8), volintro(8), volplex(8), volrootmir(8) volunroot(8)
All times are GMT -4. The time now is 09:07 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy