well I hacked around last night and came up with this:
Code:
#!/bin/bash
#find the "# Added by KNOPPIX" line
grep -A 1 "KNOPPIX" etc/fstab | grep dev | cut -c1-9 > drivelist
# read a line at a time
cat drivelist | while read line;
do
# increment a variable for sequential mount points
let "a += 1"
# make mountpoint
mkdir -p "/scanmount/drive"$a
# now mount that drive
mount ${line} /scanmount/drive$a
done
but it doesn't work, I have to give it a fs type, which is more difficult because I have to search for all the letters between the 2nd and 3rd blank spaces on the same line to populate a fs type variable, and I can't seem to figure out how to get grep/sed/awk to do that, ideas? If I can figure that out, then I have to write something that will only mount if that mountpoint is either ntfs, fat16 or fat32. I'm really starting to enjoy the power of bash scripts, though I'm still pretty new to it, it's amazing what you can do
I install an external disk on my sun solaris 8
this went fine and I was able to access all filesystem on the disk. the new disk is mounted on /local
then 6 hours later
files under /local/files was 1 byte in size
at the same time I received the following
error message in... (4 Replies)
My site has a few sun solaris server including out NIS server and NFS server on solaris machines. we also have few suse linux and redhat linux machine.
All our home directory is on our NFS server(sun Solaris) and this is automounted through /etc/auto_master and /etc/auto_home this worked fine... (1 Reply)
Hello,
I have a SUN Solaris 9 machine (Sun-Fire-V490).
I put a DVD in the reader to install a software. The automount procedure did not work (vold is running) : I have nothing under /cdrom
When I try "eject" command I have the answer "No default media available"
When I try to mount manually the... (3 Replies)
Folks;
I'm mounting a directory on a different SUSE 10 server from my SUSE server fine. using this mount command:
# mount 192.168.132.11:/var/local/new /var/local/new
this command above works fine but when i added a new line to my "/etc/fstab" to be mounted automatically every time i... (2 Replies)
Hi friends
I'm a newbie trying to automount a nfs shared directory. Below is the configuration I'm using
FreeBSD machine as NFS server. IP Address - 192.168.1.60
# cat /etc/exports
/shared 192.168.1.50
Solaris 10 as NFS client. IP Address - 192.168.1.50
# cat... (1 Reply)
Hello experts,
On my RHEL box when i mount a nfs file system using autofs, the df -t shows the file system as nfs only. For which mounts does it report the filesystem as autofs. ?? I actually want to see the filesystem getting reported as autofs instead of nfs. Pls guide me
I... (1 Reply)
When i export the directory where the data really is, i can specify which hosts can mount it. On the remote server i create a mount point directory and then mount it to the source servers directory (that has the data).
I need to run my script on Server X , i would login there and type in the... (11 Replies)
Discussion started by: bkilaru
11 Replies
LEARN ABOUT XFREE86
systemd.automount
SYSTEMD.AUTOMOUNT(5) systemd.automount SYSTEMD.AUTOMOUNT(5)NAME
systemd.automount - Automount unit configuration
SYNOPSIS
automount.automount
DESCRIPTION
A unit configuration file whose name ends in ".automount" encodes information about a file system automount point controlled and supervised
by systemd.
This man page lists the configuration options specific to this unit type. See systemd.unit(5) for the common options of all unit
configuration files. The common configuration items are configured in the generic [Unit] and [Install] sections. The automount specific
configuration options are configured in the [Automount] section.
Automount units must be named after the automount directories they control. Example: the automount point /home/lennart must be configured
in a unit file home-lennart.automount. For details about the escaping logic used to convert a file system path to a unit name see
systemd.unit(5). Note that automount units cannot be templated, nor is it possible to add multiple names to an automount unit by creating
additional symlinks to its unit file.
For each automount unit file a matching mount unit file (see systemd.mount(5) for details) must exist which is activated when the automount
path is accessed. Example: if an automount unit home-lennart.automount is active and the user accesses /home/lennart the mount unit
home-lennart.mount will be activated.
Automount units may be used to implement on-demand mounting as well as parallelized mounting of file systems.
IMPLICIT DEPENDENCIES
The following dependencies are implicitly added:
o If an automount unit is beneath another mount unit in the file system hierarchy, both a requirement and an ordering dependency between
both units are created automatically.
o An implicit Before= dependency is created between an automount unit and the mount unit it activates.
DEFAULT DEPENDENCIES
The following dependencies are added unless DefaultDependencies=no is set:
o Automount units acquire automatic Before= and Conflicts= on umount.target in order to be stopped during shutdown.
FSTAB
Automount units may either be configured via unit files, or via /etc/fstab (see fstab(5) for details).
For details how systemd parses /etc/fstab see systemd.mount(5).
If an automount point is configured in both /etc/fstab and a unit file, the configuration in the latter takes precedence.
OPTIONS
Automount files must include an [Automount] section, which carries information about the file system automount points it supervises. The
options specific to the [Automount] section of automount units are the following:
Where=
Takes an absolute path of a directory of the automount point. If the automount point does not exist at time that the automount point is
installed, it is created. This string must be reflected in the unit filename. (See above.) This option is mandatory.
DirectoryMode=
Directories of automount points (and any parent directories) are automatically created if needed. This option specifies the file system
access mode used when creating these directories. Takes an access mode in octal notation. Defaults to 0755.
TimeoutIdleSec=
Configures an idle timeout. Once the mount has been idle for the specified time, systemd will attempt to unmount. Takes a unit-less
value in seconds, or a time span value such as "5min 20s". Pass 0 to disable the timeout logic. The timeout is disabled by default.
SEE ALSO systemd(1), systemctl(1), systemd.unit(5), systemd.mount(5), mount(8), automount(8), systemd.directives(7)systemd 237SYSTEMD.AUTOMOUNT(5)
12-02-2008
