Sponsored Content
Full Discussion: Printing queue in rs6000
Operating Systems AIX Printing queue in rs6000 Post 302263745 by bakunin on Tuesday 2nd of December 2008 11:41:14 AM
Old 12-02-2008
Ok, the F40 can run at least AIX5.1. I suggest you get this (latest ML, IIRC and without checking i believe this is 11) and install it.

I'm not sure if 5.2 or even 5.3 can be installed, the support for certain RS/6000 platforms were canceled with 5.2. It may work or might not work, you will have to find that out.

Check the firmware revision in any case BEFORE you start updating the machine. Chances are they are as old as the OS and probably won't work with a newer OS any more.

I hope this helps.

bakunin
 

10 More Discussions You Might Find Interesting

1. Programming

Good IDE for C++ on RS6000/AIX

I am looking for the above Can anyone point me to a reliable product, with available support in the forseeable future ? Seeker (0 Replies)
Discussion started by: Seeker
0 Replies

2. AIX

RS6000 SSA Raid question

Hi Can I add disks on the fly to extend the capacity of an existing RAID 5 volume? It's created on a 4P Advanced SSA Raid Adapter. I need to extend a volume group, so I figured it would be easiest to extend the "physical disk" which is a RAID5 volume. Thanks. (1 Reply)
Discussion started by: osee
1 Replies

3. AIX

Printing multiple copies via remote queue

Hi all, I have an interesting problem. Using remote queues to print using jetdirect printers I am unable to get a printer to print multiple copies of a print job. command being used: lpr -P -#3 ./test (one copy prints) Also tried: enq -P -C3 ./test (same results) Any ideas? ... (6 Replies)
Discussion started by: Luck
6 Replies

4. AIX

Re-Installation of AIX 5.2 in RS6000 7026

Hi There!! I need to reinstall the operating system AIX 5.2 in a RS6000 7026/6H1 that has AIX 4.3 but I need a firmware upgrade that I dón´t know where can I obtain. - Platform firmware version 3 or later. Someone can help me please, I will be very grateful !! Thank´s. (1 Reply)
Discussion started by: terron79
1 Replies

5. AIX

New to AIX and got my hands on a RS6000 v.need help getting it on the network

So im fairly new to AIX and my knowledge is very, very limited but i got my hands on an RS6000 43P model and im trying to get it on the network so i can access it from work. I have pretty much tried everything i can/know how to do by reading up as much as i can but im still lost. I have the 43P... (2 Replies)
Discussion started by: IIIII
2 Replies

6. AIX

VNC or X Emulator on RS6000 AIX 5.2

Hello everyone, I have just joined your forum even though I have been using it on and off for couple of months now. Up until now I have been able to find any information I needed by just browsing this site or performing a Google search, but now I'm stuck!. I was hoping you could help me with... (16 Replies)
Discussion started by: juniorG
16 Replies

7. AIX

Reinstalling AIX 4.3 on IBM RS6000

Hey guys, I'm a newbie in Unix world.. Currently in my office lies an old IBM RS6000 which hasn't been maintained for a very long time. The former admin has resigned and we don't have any documentation or whatsoever regarding the old machine. All I know that it is an RS6000 is because of what's... (4 Replies)
Discussion started by: arch4ng3l
4 Replies

8. AIX

Remote printing to Linux CUPS queue

Hello all. I am setting up a queue under AIX 4.2.1 to print to a remote Linux CUPS queue. At present I can print to the queue remotely from Windows but not AIX. What I am seeing is lpstat reads the state of the remote queue but at job submission time I am getting backend exit fatal errors. The... (4 Replies)
Discussion started by: tgx
4 Replies

9. UNIX for Dummies Questions & Answers

Sco Unix printing : jobs hangs in queue - printing via lp versus hpnpf

Hi, We have a Unix 3.2v5.0.5. I installed a printer via scoadmin, HP network printer manager with network peripheral name (hostname and ipadres are in /etc/hosts). This is the configuration file : Code: root@sco1 # cat configurationBanner: on:AlwaysContent types: simpleDevice:... (0 Replies)
Discussion started by: haezeban
0 Replies

10. AIX

AIX 5.1 and RS6000

I've an old server 1996 RS6000 (Processor 604e) running AIX 5.1. It started up fine, booted up and connected on 10Mbit with my router. I used to be able to connect to it with telnet but not anymore. I know the IP is right but working with the smit tcpip options, looks like I've changed... (1 Reply)
Discussion started by: Devyn
1 Replies
DH_AUTO_INSTALL(1)						     Debhelper							DH_AUTO_INSTALL(1)

NAME
dh_auto_install - automatically runs make install or similar SYNOPSIS
dh_auto_install [buildsystemoptions] [debhelperoptions] [--params] DESCRIPTION
dh_auto_install is a debhelper program that tries to automatically install built files. It does so by running the appropriate command for the build system it detects the package uses. For example, if there's a Makefile and it contains a install target, then this is done by running make (or MAKE, if the environment variable is set). If there is a setup.py or Build.PL, it is used. Note that the Ant build system does not support installation, so dh_auto_install will not install files built using Ant. Unless --destdir option is specified, the files are installed into debian/package/ if there is only one binary package. In the multiple binary package case, the files are instead installed into debian/tmp/, and should be moved from there to the appropriate package build directory using dh_install(1). DESTDIR is used to tell make where to install the files. If the Makefile was generated by MakeMaker from a Makefile.PL, it will automatically set PREFIX=/usr too, since such Makefiles need that. This is intended to work for about 90% of packages. If it doesn't work, or tries to use the wrong install target, you're encouraged to skip using dh_auto_install at all, and just run make install manually. OPTIONS
See "BUILD SYSTEM OPTIONS" in debhelper(7) for a list of common build system selection and control options. --destdir=directory Install files into the specified directory. If this option is not specified, destination directory is determined automatically as described in the "DESCRIPTION" section. -- params Pass params to the program that is run, after the parameters that dh_auto_install usually passes. SEE ALSO
debhelper(7) This program is a part of debhelper. AUTHOR
Joey Hess <joeyh@debian.org> 11.1.6ubuntu2 2018-05-10 DH_AUTO_INSTALL(1)
All times are GMT -4. The time now is 08:12 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy