11-29-2008
question about opb boot device
hi all:
I have a sun blade-1000 for labs only, with 73G hd loaded, which boot block installed on slice 0. I'm confused by setting "boot-device" value in obp, which my question as follow:
in ok mode, I got device alias like this:
disk0: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@2,0
as I know the the disk0(fc disk) with wwn got form "cfgadm -al":
c1::2112345c5032da08 .... (for example.)
so I can replace the default boot device with:
boot /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w2112345c5032da08,0
(same as followed :a)
or just said;
boot disk0
with "prtconf -v" got the device path of HD is:
dev_path=/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w2100000c5032da08,0:a
or "format":
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w2112345c5032da08,0
but such boot device caused fail to boot up:
boot /pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w2112345c5032da08,0
(same as followed :a)
...
Can't locate boot device
seem like only ".../disk@w211..." work but ".../ssd@w211..." don't work. can any one tell the difference? and where the value ".../disk@" came from?
I'm pretty new to solaris, so any help is great, thank in advance.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I need to change the boot slice on a Sun box, more specifically the alias of "disk". When I do a printenv from the ok prompt, it lists "boot-device disk net", but when it boots, it is looking at the wrong slice on "disk" (3 Replies)
Discussion started by: 98_1LE
3 Replies
2. UNIX for Dummies Questions & Answers
I watched this done a long time ago, but cannot find it anywhere. I need to alias the boot device "disk" to /sbus@7,0/QLGC,isp@0,10000/sd@c,0
I think I need to set "use-nvramrc?" to true, and then create an alias within the nvramrc to point disk to the boot disk, but this is the step I cannot... (3 Replies)
Discussion started by: 98_1LE
3 Replies
3. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
4. Solaris
Hi i need help pls ...
Server type sun fire 3800 I need to install solaris 9 .
When i boot the system i recieve the following :
System Controller 'sunfire3800':
Type 0 for Platform Shell
Type 1 for domain A console
Type 2 for domain B console
Type 3 for... (5 Replies)
Discussion started by: tt155
5 Replies
5. Solaris
I have a real emergency. I have a Sun Fire V240 UltraSparc server and am connected via the Serial Mgmnt Port with a Laptop. I have been building an Oracle database on it for the past couple months, not getting very far along with it , when suddenly, the system had a fatal crash. I've lost the... (2 Replies)
Discussion started by: mayewil
2 Replies
6. Boot Loaders
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
Discussion started by: rpf
0 Replies
7. Solaris
Hello,
I am wondering which commend /file to check to find out what is the boot device?
regards
Ahmed
Egypt (1 Reply)
Discussion started by: ahmedamer12
1 Replies
8. Solaris
I installed a new hard drive completely blank.
sun blade 150
openboot 4.10.6
message:
Boot device: disk:a File and args:
Bad magic number in disk label
Can't open label package
Evaluating:
Can't open boot device (15 Replies)
Discussion started by: janiper
15 Replies
9. Solaris
Hello Forum,
I'm really in a fix now,
I'm getting this error message now, seems like the boot block is damaged?
When I do probe-all the system freezes...
Can any one guide me as what to do next?
System is Solaris 8 running Open Boot PROM 4
System also does not have a cd/dvd rom drive...
... (17 Replies)
Discussion started by: br1an
17 Replies
10. Ubuntu
I cannot access or boot from my C drive. I'm running Zorin 9 and the drive is a Samsung SSD. The disk was encrypted on install, and that has not given me any problems before.
When I start the system it gets to the memory test page, and does not then load the password prompt, which it used to.... (1 Reply)
Discussion started by: David4321
1 Replies
fp(7d) Devices fp(7d)
NAME
fp - Sun Fibre Channel port driver
DESCRIPTION
The fp driver is a Sun fibre channel nexus driver that enables fibre channel topology discovery, device discovery, fibre channel adapter
port management and other capabilities through well-defined fibre channel adapter driver interfaces.
The fp driver requires the presence of a fabric name server in fabric and public loop topologies to discover fibre channel devices. In pri-
vate loop topologies, the driver discovers devices by performing PLOGI to all valid AL_PAs, provided that devices do not participate in
LIRP and LILP stages of loop initialization.
CONFIGURATION
The fp driver is configured by defining properties in the fp.conf file. The fp driver supports the following properties:
mpxio-disable
Solaris I/O multipathing is enabled or disabled on fibre channel devices with the mpxio-disable property. Specifying mpxio-disable="no"
activates I/O multipathing, while mpxio-disable="yes" disables the feature.
Solaris I/O multipathing may be enabled or disabled on a per port basis. Per port settings override the global setting for the specified
ports. The following example shows how to disable multipathing on port 0 whose parent is /pci@8,600000/SUNW,qlc@4:
name="fp" parent="/pci@8,600000/SUNW,qlc@4" port=0
mpxio-disable="yes";
manual_configuration_only
Automatic configuration of SCSI devices in the fabric is enabled by default and thus allows all devices discovered in the SAN zone to be
enumerated in the kernel's device tree automatically. The manual_configuration_only property may be configured to disable the default
behavior and force the manual configuration of the devices in the SAN. Specifying manual_configuration_only=1 disables the automatic con-
figuration of devices.
FILES
/kernel/drv/fp
32-bit ELF kernel driver (x86)
/kernel/drv/amd64/fp
64-bit ELF kernel driver (x86)
/kernel/drv/sparcv9/fp
64-bit ELF kernel driver (SPARC)
/kernel/drv/fp.conf
fp driver configuration file.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|mpxio-disable |Unstable |
+-----------------------------+-----------------------------+
|manual_configuration_only |Obsolete |
+-----------------------------+-----------------------------+
|Availability |SUNWfctl |
+-----------------------------+-----------------------------+
SEE ALSO
cfgadm_fp(1M), prtconf(1M), stmsboot(1M), driver.conf(4), attributes(5), fcp(7D), fctl(7D), scsi_vhci(7D)
Writing Device Drivers
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994
Fibre Channel Generic Services (FC-GS-2) Project 1134-D
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Protocol for SCSI (FCP) ANSI X3.269-1996
SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998
Fabric Loop Attachment (FC-FLA), NCITS TR-20:1998
SunOS 5.10 2 Dec 2004 fp(7d)