Help needed in IPTables firewall/router setup

3 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

how to configure a linux box as a firewall using iptables

I have already compiled the kernel and configured it to run as a firewall. My computer has 2 NICs and is on two seperate networks. I can ping both networks from my computer, but workstations on one network can not ping workstations on the other. What Scripts or commands do I need to install ?

2. SuSE

setup Linux as a wireless router

Hi I've done some google searching but haven't really found anything that seems to be what I need. First I should add it's been awhile since I have run Linux but that's changing :) What I'm after doing is setting up a Linux box as a wireless router. I will be running the Suse distro if I...

3. UNIX for Beginners Questions & Answers

Linux router help needed

hi guys. I have an Kaon router wich runs "Linux version 3.10.24-svn1480 (jskim@jake-205) (gcc version 4.4.7 (Realtek MSDK-4.4.7 Build 1459". The problem I have it is that its firmware is in early stages and has alot of things messed up. Wake on lan doesn't work without arp binding and that can...

LEARN ABOUT SUSE

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <erezz@voltaire.com>.

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)