10-31-2008
how and where can i grep the device path?
9 More Discussions You Might Find Interesting
1. Solaris
hi all,
My OS is solaris 8 with core system installation only. so far everything works fine. by i do some testing from my xp pc as client to nmap and scan opening port to my solaris. the result as below:
Initiating SYN Stealth Scan against 10.10.10.10 at 16:25
Discovered open port 21/tcp on... (3 Replies)
Discussion started by: hezry79
3 Replies
2. Solaris
Dear experts
I need to define a port with number 15291 in my solaris8 Workstation to be able to comunicate from my ps with an installed software on the workstation. How and where should I define this port in solaris8 workstation.
Very Best Regards
Reza (3 Replies)
Discussion started by: Reza Nazarian
3 Replies
3. Solaris
Hi,
I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200
to
corresponding ports of server 10.2.45.197.
I am using Solaris 10.0.
-bash-3.00$ uname -a
SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445
Is... (6 Replies)
Discussion started by: vikas027
6 Replies
4. Solaris
I would like to know if it is possible to read from an I/O Port in solaris. I need to monitor the parallel port of 1 PC and save all the incoming and outgoing messages. I use a SPARC Solaris running Solaris 2.5.1. I have seen a driver for x86 based systems but none for SPARC.
Any help on how to... (8 Replies)
Discussion started by: devjay
8 Replies
5. Solaris
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Discussion started by: ppereira
0 Replies
6. Solaris
Hi All,
I am installing Infosphere (ETL tool) on solaris 10.
One of the requirement is to open multiple ports for different apps that will be installed. I ran netstat -n | grep 9080 (,etc) but that did not return anything.
I have attached the requirement. Can anyone guide me about how to... (3 Replies)
Discussion started by: sumeet
3 Replies
7. Solaris
Hi there,
I tried just open a port but I failed ;-(
# telnet localhost 9876
That should work so I did ...
# vi /etc/services
myport 9876/tcp # my port
# svcadm restart inetd
-> New pid, see ps - ef | grep inet
# netstat -an | grep 9876
No port 9876 is waiting ;(
#... (4 Replies)
Discussion started by: System
4 Replies
8. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
9. Solaris
When I attempt to telnet from a remote host or local to the eai port of server B I get the following error.
***ERROR: You must be admin to run this script You are root.
Connection to localhost closed by foreign host.
But, I'm logged in as admin in both instances.
Has anyone experienced... (0 Replies)
Discussion started by: palu1124
0 Replies
UMCS(4) BSD Kernel Interfaces Manual UMCS(4)
NAME
umcs -- USB support for serial adapters based on the MCS7820 and MCS7840 chips
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb
device ucom
device umcs
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
umcs_load="YES"
DESCRIPTION
The umcs driver provides support for various multiport serial adapters based on the MosCom MCS7820 and MCS7840 chips. They are 2- or 4-port
adapters with full-featured 16550-compatible UARTs and very flexible baud generators. Also, these chips support RS422/RS485 and IrDA opera-
tions.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
Different ports on device are presented as sub-units, like /dev/ttyU0.1 and /dev/ttyU0.2.
HARDWARE
The umcs driver was tested on the following adapters:
o ST Lab U-360 two-port serial USB adapter
o ST Lab U-400 four-port serial USB adapter
SEE ALSO
tty(4), ucom(4), usb(4)
HISTORY
The umcs driver appeared in ports since December of 2010.
AUTHORS
The umcs driver was written by Lev Serebryakov <lev@FreeBSD.org>.
BUGS
This driver doesn't support access to any fine tunes of chip, like RS522/RS485 mode, non-standard baudrates, etc.
BSD
February 25, 2012 BSD