Mirrored root and swap HP9000 machine Post: 302253193

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Upgrade HP9000 HP-UX 10.20 to 11.00

To all expert members, i need your help. We have an existing HP9000 K-Class 32-bit with HP-UX 10.20 OS installed and we would like to upgrade it to HP-UX 11.00. I am not really confident in doing upgrades in our system because i don't have any experience or trainings on this. If somebody can...

2. Solaris

restore mirrored root

Hi, I have an ultra60 SUN Server with Solaris 10 4/04 S.O. installed on. I mirrored root disk and now I try to restore this. I simulate that I have lose the root FS, not for a hardware faillure but for a software problem and I can't use "meta"commands for using a good submirror. I must restore...

3. Solaris

formula to get the swap space on a machine

Hello there are different opinions on how to get the swap space on Solaris. some say: swap -s and the space= used + available others say swap -l (donno how they get the swap size) other say 'top' command others say using format command (in print sub-command) Could you please advise on...

4. Solaris

migrate zpool root mirrored to other server by network

I have two servers, the first server is a sun x4170 and i need transfer zpool root (with all system) that this moment is mirror to new server x4200 , i don't now how can i clone , copy o migrate rpool (root) in new server by network. The two servers are different sites. Do i need jumpstart or...

5. SCO

Reset root OR crack old sco 3.2 machine

I have an old compaq running sco 3.2. the old IT guy died and we need to reset the password OR crack into the machine. I have tried mscreen and at exploits but can't seem to get them to work. I have access with other user accounts. This is a machine we own.

6. Shell Programming and Scripting

I have a requirement to check whose accounts are expired in Linux machine and send a mail to root

I have a requirement to check whose accounts are expired in Linux machine and send a mail to root user about the accounts. How can i achieve this in Linux?

7. HP-UX

HP9000 Container - NFS Issue

I am running HP9000 Containers version A.03.01. I have the container up and running. I now need to mount an exported file system from another HPUX server with both read and write permissions. I can get the mount okay but from the container I cannot read or write properly to the mounted file...

8. UNIX for Dummies Questions & Answers

SWAP command not working on Linux machine

Hi I am working on linux machine and swap command is not working Linux Machine On Solaris machine it is working fine: uname -a SunOS rgsm01 5.9 Generic_118558-03 sun4u sparc SUNW,Sun-Fire-V440 swap -s total: 6596320k bytes allocated + 1035968k reserved = 7632288k used, 38893408k available ...

9. Hardware

HP9000 Server - Stuck on RAID0

Hey all, I've got an old HP9000 L1000 server with HP-UX installed. The drives that the OS is running on are in RAID0. I am concerned for the reliability of the server. The four hard drives in the front of the server are LVD 18.2 drives. I know with RAID0, if one drive fails, they all fail. ...

LEARN ABOUT REDHAT

ammt

AMMT(8) 						      System Manager's Manual							   AMMT(8)

NAME

       ammt - Amanda version of mt

SYNOPSIS

       ammt [ -d ] [ -f|-t device ] command [ count ]

DESCRIPTION

       Ammt  provides just enough of the standard mt command for the needs of Amanda.  This is handy when doing a full restore and the standard mt
       program has not yet been found.

       Ammt also provides access to the Amanda output drivers that support various tape simulations.

       See the amanda(8) man page for more details about Amanda.  See the OUTPUT DRIVERS section of amanda(8) for more information on  the  Amanda
       output drivers.

OPTIONS

       -d     Turn on debugging output.

       -f device
	      Access tape device device.  If not specified, the TAPE environment variable is used.

       -t device
	      Same as -f.

       command count
	      Which command to issue, and an optional count of operations.

COMMANDS

       Each command may be abbreviated to whatever length makes it unique.

       eof|weof count
	      Write count (default: 1) end of file marks (tapemarks).

       fsf count
	      Skip forward count (default: 1) files.

       bsf count
	      Skip backward count (default: 1) files.

       asf count
	      Position to file number count (default: 0) where zero is beginning of tape.  This is the same as a rewind followed by a fsf count.

       rewind Rewind to beginning of tape.

       offline|rewoffl
	      Rewind to beginning of tape and unload the tape from the drive.

       status Report  status information about the drive.  Which data reported, and what it means, depends on the underlying operating system, and
	      may include:

	      ONLINE Indicates the drive is online and ready.

	      OFFLINE
		     Indicates the drive is offline or not ready.

	      BOT    Indicates the drive is at beginning of tape.

	      EOT    Indicates the drive is at end of tape.

	      PROTECTED
		     Indicates the tape is write protected.

	      ds     Device status.

	      er     Error register.

	      fileno Current tape file number.

	      blkno  Current tape block number file.

	      NOTE: many systems only report good data when a tape is in the drive and ready.

AUTHOR

       Marc Mengel <mengel@fnal.gov>
       John R. Jackson <jrj@purdue.edu>

SEE ALSO

       amanda(8)

																	   AMMT(8)