I had been using a modem installed on a Digi accelerator port to dial in to an SCO open server r5 server. On monday it quit working and I realy don't know how it was installed and configured. I have tested the modem on a PC and it works. The port the modem is connected to is ttyB06 and I have... (1 Reply)
I am trying to install openssh v2.9-p2 on Solaris 8. I already installed zlib and openssl, as required in INSTALL file. But when I issue ./configure to configure openssh v2.9-p2 for my platform ( I got the sources), it stops in the folowing message:
checking for OpenSSL directory... configure:... (1 Reply)
Hi all, i am new in solaris, i have a solris server Ultra 60, when i turn on the server show me the follow error:
Bad magic number in disk label
can`t open disk label package
Boot device: net File and args:
Timeouot waiting for ARP/RARP packet
Timeouot waiting for ARP/RARP packet
....
I... (3 Replies)
hi. I am newbie in Unix. I wanted to install Free BSD 5.2.1 to my computer which winXp was already installed. But i couldn't.
I chose Standard. Then it said you are going to use dos style fdisk partitioning. Then a window displayed begining like this.
WARNING: A geometry of 155127/16/63 for... (2 Replies)
Please can somebody help me. I'm trying to open ports 999, 1982 and 1983 but am not having much luck. I used
iptables -A INPUT -i eth0 -p tcp --sport 999 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --sport 1982 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables... (5 Replies)
I tried to install solaris 10 on a Netra T2000 server.
From prompt ok, I entered "boot cdrom - install" command.
Then, things seems to work normally. Except that nothing happend after displaying "Configuring the /devices".
It seems that, installation never arrived to configure /devices.
... (4 Replies)
Hi all,
I tried to install Sun Solaris 10 on a X-86 based machine. I have dedicated entire diskspace to create auto partition. My hardware config is below:
Main Board : Asus
Processor : Intel 945 , 3 G/Hz
RAM : 1 Gigs
Diskspace : 80 Gigs
When I install, installation goes successful.... (1 Reply)
I use DesktopBSD (FreeBSD + KDE) and regularly install this on our machines. Currently I go to the package manager to install the ports, but what shell command can I enter instead right after BSD install to install the ports?
Thanks in advance (3 Replies)
Hi everyone,
Hope u doing good.
I am trying to installl WebSphere Application Server(WAS) ND package, i got problem at initial level
I hope, the problem is with Mozilla browzer. Can anyone trobleshoot the problem
An error occurred while starting the launchpad for a WebSphere Application ... (0 Replies)
A problem with binding to local ports (22,23,80) in Fedora 13.
Ports look not used. sshd, webserver is not running.
I am using java remote connection manager. It is working fine with IE or Firefox in Windows with any user account.
With Fedora 13, it starts via Firefox with not root account and... (0 Replies)
Discussion started by: gogogo
0 Replies
LEARN ABOUT OSF1
port_names
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)