10-17-2008
As you can see there is no reference of /u01 in the 3rd column of /etc/vfstab.
Can you see the new disk on format command ?
1. Select that disk from list and partition it by selecting the disk partition you wanna then assign it partition ID tag , which ever you want ( you can get the correct value for this by typing ‘?’ mark there and then hitting the enter button. Same way you can select the permission flags , after that u need to assign the starting cylinder number be care full while selecting the starting cylinder or just press enter if not sure. Then select the end cylinder number , here you can pass the value in GB say if u need 50GB , enter the value as 50g . press enter. Verify the same by pressing ‘p’ or print on the format command, once you are sure then label the disk and quit the format utility.
2. After that you need to assign the file type on the partition which you can do with newfs command , i.e.
Quote:
newfs /dev/rdsk/c0t0d0p<number> s<number>
and press enter. This command will create the ufs file system on the give partition.
3. Then create the mount point with
4 enter the partition on /etc/vfstab where in you have to give value for seven filed edit and save and exit the file.
Quote:
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
5. execute command
6 check if the file system is mount on not with
Last edited by kumarmani; 10-17-2008 at 12:20 PM..
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
hi all, i was wondering if i have some volume manager and i want to format all partitions/disks and re-create new slices can i use regular format command or what?
i think veritas volume manager is already installed. (2 Replies)
Discussion started by: Bashar
2 Replies
2. Solaris
Hi,
Anyone know if I have a mount point /data , can it turn on compression
like what the MS Windows does ????
Thanks (2 Replies)
Discussion started by: civic2005
2 Replies
3. Solaris
Hi,
I have the present scenario on a x86 machine.
fdisk c0d0p0
Cylinders
Partition Status Type Start End Length %
1 Active Solaris2 1 2500 2500 61
2 ... (14 Replies)
Discussion started by: vibhor_agarwali
14 Replies
4. UNIX for Advanced & Expert Users
I m using solaris 8. I have some free space on my hard disk. I want to merge that space into /export/home. Please tell me complete procedure for doing it. (7 Replies)
Discussion started by: mansoorulhaq
7 Replies
5. Solaris
I am seeking advice from experts in this forum. Please help me.
I have tow disks on Sun Sparc box. Disk one has been installed Solaris 9 system. The disk two has been partitioned as one disk with 140 GB on the partition /dev/dsk/c1t1d0s6. Right now, I want to modify it as two partitions. I have... (8 Replies)
Discussion started by: duke0001
8 Replies
6. Solaris
Hi Every one,
I am new to Solaris and i want to know how to get a mail when the partition reaches certain Ex-75% percentage, and how to write shell script. I hope some one will help me.
Thanks and Regards,
Venkatesh.
##edit#by#moderator##
don't post your email address here... (1 Reply)
Discussion started by: 1409.venkatesh
1 Replies
7. Solaris
I have a dual boot system with windows xp and solaris 10 running. Solaris 10 is currently in the primary active partision. If it's possible, how do I make the windows partision the primary active one rather than solaris 10? (1 Reply)
Discussion started by: shakarho
1 Replies
8. Solaris
Hi all
i got this filesystem
Filesystem size used avail capacity Mounted on
/dev/dsk/c0t600A0B80001F350A000033404A5D29D9d0s2
492G 64M 487G 1% /u10
How do i change the name for /dev/dsk/c0t600A0B80001F350A000033404A5D29D9d0s2 to the... (3 Replies)
Discussion started by: SmartAntz
3 Replies
9. Solaris
hi all
while formatting hard disk i am getting following error.
Partition 1 ends at 266338338
It must be between 34 and 143374704.
label error: EFI Labels do not support overlapping partitions
Partition 8 overlaps partition 1.
Warning: error writing EFI.
Label failed.
I have formatted the... (2 Replies)
Discussion started by: nikhil kasar
2 Replies
10. Red Hat
hi
I created a new partition
ls -l /dev/sda*
brw-rw---- 1 root disk 8, 0 Oct 21 12:29 /dev/sda
brw-rw---- 1 root disk 8, 1 Oct 12 11:19 /dev/sda1
brw-rw---- 1 root disk 8, 10 Oct 21 13:50 /dev/sda10
brw-rw---- 1 root disk 8, 2 Oct 12 11:19 /dev/sda2
brw-rw---- 1 root disk 8, 3 Oct... (3 Replies)
Discussion started by: mnnn
3 Replies
LEARN ABOUT DEBIAN
vfstab
vfstab(4) File Formats vfstab(4)
NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO
fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)