Serial port problem Post: 302247759

10 More Discussions You Might Find Interesting

1. Programming

socket on serial port

Does anyone know if it's possible to send socket by a serial port ? If yes, how can I find on Irix the value of my serial ports to use with this function : serverSockAddr.sin_port = ? Thanks for all responses ! Kintoo

2. Programming

Problem regarding serial port and multithreading

hello, I am creating a application in which I first open the serial port and then create the thread..for reading the data comming through that serial port. from that same thread I create another thread that is write thread means for writing on the serial port... I am continously polling again...

3. Programming

problem while having a communication with serial port?????

hello, I am gettin problem while sending and recieving data through seial port... when I am sending Data then the reciever end is not able to recieve that data ..... Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again...

4. UNIX for Dummies Questions & Answers

problem with serial port BSD

Hello all , i have change my system debian linux to freebsd( pcBSD) all working as well , but the serial does not work correctly. Under linux the problem does not appears. my problem is than my serial port does work . the first step than i have make is look with dmesg if my serial are...

5. Programming

problem in coding for GSM interfacing using serial port

i am having some coding problem in c for interfacing the GSM module through serial port. i want to send/receive sms. i have done all the setting for the port and know the AT command to use in this but i am actually having problem in reading and writing from serial port how to handle the signal when...

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. SCO

Problem finding what is using a serial port

How can I determine what process is currently using a serial port? A good bit of google searching hasn't turned up anything useful, but it seems like there has to be a way to do this without too much difficulty. When I first started looking into this problem, I assumed that when a port was in...

9. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35...

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT NETBSD

scc

SCC(4)							   BSD Kernel Interfaces Manual 						    SCC(4)

NAME

     scc -- Zilog 8530 Serial Communications Controller interface

SYNOPSIS

     scc* at ioasic? offset ?

DESCRIPTION

     The scc driver provides support for the Zilog 8530 Serial Communications Controller (SCC) via the IOASIC found on DECstation 5000 models in
     the /100, /20, and /240 series (supported by NetBSD/pmax).

     Each SCC device has two serial ports.  The DECstation 5000 model 20 provides one SCC device.  Other models provide two, but one port of each
     device is dedicated to mouse and keyboard input, respectively.

     Input and output for each line may set to one of following baud rates: 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600,
     19200, 38400, or 57600.

     Speeds up to 230400 are supported by the chip and the motherboard, but speeds higher than 57600 do not work reliably without an external
     clock signal.

FILES

     /dev/ttya
     /dev/ttyb
     /dev/ttyc
     /dev/ttyd

     The mapping from units to serial-hardware outlets is idiosyncratic.  The even ports are wired serial connectors and the odd-numbered ports
     are reserved for mouse and keyboard.

     On machines with one port like Personal DECstations, the single device is ttya.

     On the 5000/1xx and 5000/2xx, the first serial port (default serial console) is ttyc and the second port is ttya.

SEE ALSO

     intro(4), ioasic(4), ttys(5), MAKEDEV(8)

HISTORY

     The scc driver first appeared in 4.4BSD.

     The scc driver was also used for the IOASIC SCC found in DEC Alpha model 3000 TurboCHANNEL based systems; NetBSD/alpha has since been con-
     verted to use the machine-independent zstty(4).

BUGS

     The IOASIC provides internal DMA channels that can be programmed to transfer up to 4096 bytes of data into, or out, of an SCC without further
     software intervention.  This feature of the IOASIC is not yet supported.

     The mapping from device-special files (major and minor number) to chip and port is arguably backwards.  ULTRIX tries to hide the hardware
     mapping, but NetBSD does not.  Users wanting to use ULTRIX compatible tty names /dev/tty0 and /dev/tty1 for the scc comm-port lines should
     make links or device-special files which match their hardware setup.

BSD
								  April 24, 2003							       BSD