Mpxio Post: 302247174

10 More Discussions You Might Find Interesting

1. Solaris

Mpxio

Hi, I have a quick question. How can I see MPXIO statistics (like errors, how many I/O|throuput per path, ....) on Solaris 10? Does maybe a ready dtrace script exist (I do not have the knowledge to write one myself)? I would be happy if somebody knows some good documentation/links (with...

2. Filesystems, Disks and Memory

VxVM and MPxIO

:confused: Last week I read that VxVM won't work with MPxIO (i don't recall the link) and that it should be unconfigured when installing VxVM. Today I read that VxVM works in "pass-thru" mode with MPxIO and DMP uses the devices presented by MPxIO. If I create disks with MPxIO and use VxVM to...

3. Filesystems, Disks and Memory

MPxIO question

Greetings Forumers!! I was given a T2000 with one, dual port, HBA card. The card had one fiber connection to the SAN and the former admin enabled MPxIO. Yesterday, I learned that the other port was connected to the same SAN. This system is in another city so I don't have physical access to...

4. UNIX for Advanced & Expert Users

mpxio in Solaris10 with NetApp FAS3140 problem

we have a v440 SUN machine with a NetApp FAS3140 SAN storage, the v440 got 2 HBA qlogic cards both connected to the switch side in NetApp 3140, zoning in netapp configured proberly and luns are adversitesed to the SUN machine, the problem i am facing is that when i try to configure the mpxio i am...

5. Solaris

MPXIO

Hi Kudo, I wanna to know that how can I do mpxio device name to os native name mapping without using stmsboot -L I tried everything still not able to got the solution till I able to get these o/p here is native disk info as well physical wat is the logical OS name of the disk ...

6. Solaris

Curious MPxIO problem

Hello folks, I have a newly installed Solaris 10 system running on a T6320 blade. I have set up LDM with the intent to move an ldom from another blade to this one. So far, so good. I had the SAN folks make the LUNs belonging to the ldom visible to my new blade and I can see them, all 4 paths....

7. Solaris

Migrate from MPXIO to Powerpath

Here is the issue: I am building a database server using Solaris 10x86 U8. The system is jumpstarted with mpxio enabled and booting from the san. We need to have powerpath 5.3 installed and would like to have powerpath take control of the the boot san as well or have mpxio control the san...

8. Solaris

solaris turn off multipath mpxio

Im not able to turn the multipath off on the solaris s10 X86...since im on FC boot.. if i disable multipath , from /kernel/drv/iscsi.conf then im not able to boot the machine.:wall: Is there any other go or any suggestions .

9. Solaris

Solaris 10 + mpxio Path

Hi, I have an Oracle/Sun T3-2 Server with a duel SAS controller Fujitsu DX60 array attached. I have 2 x SAS HBA's in the T3-2. One HBA cabled to CM0 and one HBA cabled to CM1 of the array. The array is setup with one RAID GROUP and one VOLUME and one LUN In Solaris I can see one device...

10. Solaris

MPxIO Multipathing Problem

Hi, I believe this is an OS multipathing issue - Solaris 10 We have x2 Dual port 8GB Qlogic HBA's installed in our SOlaris 10 host. HBA0 (IOU0) Port WWN's - 09f4 (pci@3,700000/SUNW,qlc@0) 09f5 (pci@3,700000/SUNW,qlc@0,1) HBA1 (IOU1) Port WWN's...

LEARN ABOUT DEBIAN

sg_emc_trespass

SG_EMC_TRESPASS(8)						     SG3_UTILS							SG_EMC_TRESPASS(8)

NAME

       sg_emc_trespass - Changes ownership of a LUN from another Service-Processor to this one.

SYNOPSIS

       sg_emc_trespass [-d] [-hr] [-s] [-V] DEVICE

DESCRIPTION

       sg_emc_trespass	sends  an EMC-specific Trespass Command to the DEVICE with the selected options. This Mode Select changes the ownership of
       the LUN of the device from another Service-Processor to the one the command was received on.

OPTIONS

       Arguments to long options are mandatory for short options as well.

       -d     outputs some extra debug information associated with executing this command

       -hr    Sets the 'Honor Reservation' bit in the command. If set, the trespass will only succeed to change the ownership from the Peer SP	if
	      the Peer SP does not have an outstanding SCSI reservation for the LUN. By default, the reservation state will be ignored.

       -s     Send the short version of the trespass command instead of the long version. The short version is supported on the EMC FC5300, FC4500
	      and FC4700. The long version (default) is supported on the CLARiiON CX and AX family arrays.

       -V     print out version string then exit.

       In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the 2.6 series block devices (e.g. SCSI disks and  DVD
       drives) can also be specified. For example "sg_start 0 /dev/sda" will work in the 2.6 series kernels.

EXIT STATUS

       The exit status of sg_emc_trespass is 0 when it is successful. Otherwise see the sg3_utils(8) man page.

AUTHOR

       Written by Lars Marowsky-Bree, based on sg_start.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright (C) 2004 Lars Marowsky-Bree, Douglas Gilbert.
       This  software  is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

sg3_utils-1.23							   January 2007 						SG_EMC_TRESPASS(8)